55 Job openings found

9 Opening(s)
3.0 Year(s) To 9.0 Year(s)
5.00 LPA TO 9.00 LPA
The Desk Operator – BTG is responsible for the continuous monitoring, control, and operation of the Boiler, Turbine, and Generator (BTG) systems. The role requires the operator to ensure optimal plant performance, troubleshoot issues, and provide effective communication between the control room and field operators, ensuring safe and efficient operations ...
2 Opening(s)
4.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
Essential Job Responsibilities: Development of 3D Model in S3D and extraction of Instrument, RIO Cabinets and Junction Box Location Plan drawings in Smart Sketch. Preparation of Instrument Wiring Drawing and Loop Drawings using SPI Wiring and Loop Generation Modules. Development of Cable Block Diagrams, Cable Schedule, Cable Routing & Tray Route Layout, JB Termination Drawing, Control ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 5.00 LPA
I. Summary Operate and monitor all equipment on the Boilers, Turbine/Generators, Steam System, and Water System. Perform all the duties in the control room.. Maintain proper water chemistry. Perform other duties as outlined by supervisor or lead person and relieve boiler operator and fuel pusher during break periods.   II. Duties and Responsibilities To ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 5.00 LPA
I. Summary Operate and monitor all equipment on the Boilers, Turbine/Generators, Steam System, and Water System. Perform all the duties in the control room.. Maintain proper water chemistry. Perform other duties as outlined by supervisor or lead person and relieve boiler operator and fuel pusher during break periods.   II. Duties and Responsibilities To ...
2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.60 LPA
Operation of CHP Equipment: Operate and control combined cycle gas turbine (CCGT), steam turbines, boilers, heat recovery steam generators (HRSG), and associated auxiliary equipment to generate electricity and thermal energy in accordance with production demands and grid requirements. Monitor and adjust operating parameters such as fuel flow, steam pressure, turbine speed, and ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.50 LPA
Job Description: 1) Controls steam-driven turbogenerators in electric or nuclear power generating station: Starts or signals AUXILIARY-EQUIPMENT OPERATOR to start turbines and boiler auxiliary units.   2) Adjusts throttle and vacuum-breaker valve to engage governor that regulates speed of turbines and notifies SWITCHBOARD OPERATOR that turbine-driven generators can be synchronized with auxiliary units.   3) ...
3 Opening(s)
10.0 Year(s) To 12.0 Year(s)
3.80 LPA TO 3.80 LPA
Job Description: 1) Controls steam-driven turbogenerators in electric or nuclear power generating station: Starts or signals AUXILIARY-EQUIPMENT OPERATOR to start turbines and boiler auxiliary units.   2) Adjusts throttle and vacuum-breaker valve to engage governor that regulates speed of turbines and notifies SWITCHBOARD OPERATOR that turbine-driven generators can be synchronized with auxiliary units.   3) ...
2 Opening(s)
2.0 Year(s) To 7.0 Year(s)
2.00 LPA TO 4.00 LPA
Operate electronic or computerized control panel from a central control room to monitor and optimize physical and chemical processes for several processing units Control process start-up, shut-down and troubleshooting Monitor outside process equipment Adjust equipment, valves, pumps and controls and process equipment Authorize or co-sign maintenance work orders Shut down, isolate and prepare process units ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
7.00 LPA TO 8.00 LPA
Designation- Senior Solar Design EngineerLocation- Saltlake/ KolkataReports to: CTO & GM-SolarProject Qualification – B.E/ B.Tech (Electrical) Job Description: • Should have knowledge of DC & AC engineering specifications of Solar PV Plants and standards including IEC, IEEE, SEC, IS etc. NEC & ANSI (Preferred, but not compulsory)• Very good experience with ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 8.40 LPA
Duties/Responsibilities: Analyzes current equipment; identifies areas of inefficiency and needs for improvement; designs and develops instrumentation to meet those needs. Collaborates with other engineers to develop accurate, efficient equipment and instrumentation in accordance with safety and usability standards and client expectations. Designs and tests prototypes of equipment. Creates basic schematics and simulated models to ...

Drop Your CV

We will consider your Profile for future Jobs

Submit Profile