1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
3.60 LPA TO 5.00 LPA
Company Profile :
Manufacturing & Assembling of Automobile spare parts.Manufactures two wheeler chassis, silencer, break peddle, gear change leaver ,swing arm, side and main stand etc Supplies to Bajaj Auto pune. Fully atomized A.C.E.D. and Spray paint shop Fully atomized chassi assembly line.
JOB PROFILE
All ACED&PT paint shop maintenance.
Operating & Maintenance of water treatment plant & DM plant.
Chain type and bearing type conveyor operating and maintenance.
Maintenance of press Machine and pumps.
Hydraulic presser and pneumatic presser system regulator pumps and filters Maintenance.
Tilting unit, Jig fixture and roller system maintenance.
Forklift, Maine and poi let maintenance.
Paint shop work… paint gun[devilbish.poilet.rohansworge]paint and air filter s work .
Oven for hot temperatures maintenance.
Electric and pneumatic screw drivers maintain and repair.
Jig and tilting units repairing and maintenance work.
Pumps work...Centrifuge, hydraulic.pneumatic, screw, paint pump, and all pumps assembly and maintenance work.
Pipe line fitting with all instruments.
Cooling tower maintenance.
Hot water generator preventive and break down maintenance.
Daily weekly and monthly P.M. and all check sheet updation..
Man power handling & work allotment.
Maintenance of major system..
Job Location : Waluj MIDC, Aurangabad
for more details call on 7249840333 /
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
iring for Shift Engineer/Supervisor(Maintenance) in Forging Autocomponent Manufacturer in Aurangabad , Shendra MIDC..
Designation : Shift Engineer/Supervisor(Maintenance)
Education : DME / BE Mechanical
Must Required experience - Forging Experience
Working as Maintenance engineer in shifts MIC (maintenance in charge)
to handle Breakdown and Preventive Maintenance of Machines like,
Mechanical Press (8000T and 1600T), Disa shot Blasting machine,
Megnaflux machine, Reduce Roll, Induction Billet Heater Coils,
Band Saw machine, Descaler Bare Pump,
Conveyors like Cooling conveyor, Flash conveyor, Drop-out conveyor,
Fanuc Robots
To ensure daily maintenance problems communication to the next shift reliever
Independent Maintenance handling
Preventive, Break down maintenance.
Experience : Min 3 Years
Candidate from Forging Shop.
Final CTC- 3.60 Lacs
For more details call on 7249840333
Job Location ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 2.50 LPA
ITI Refrigeration (RAC)- 2 to 3 years experience in FMCG or Manufacturing ITI Fitter - 2 to 3 years experience in FMCG or Manufacturing Experience : ITI Fitter and ITI RAC candidates must have hands-on experience in operation and maintenance of Cooling systems like Cooling tower, Chilling Plant, Compressor, pump ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
13.00 LPA TO 15.00 LPA
Position: Manager/Asst. Manager - Utility & Maintenance (Unit-4)
Location: Jhagadia near by Ankleshwar
Experience: 10 - 15 Years
Industries: Chemical
Responsibilities:
Lead and maintain mechanical maintenance, modification and capex processes, so as to support manufacturing in achieving production plan.
Identification, planning and procurement of spares, indigenous ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
18.00 LPA TO 20.00 LPA
Position: Utility Head
Location: Sachin- Surat
Experience: 15- 20 Years
Industries: Chemical
Responsibilities:
Controlling and Maintaining Schedule of checklist of: (Chilling Plant, Boiler, Thermotank, Compressor, Cooling tower, RO plant)
Chilling Plant of All Units (GAS, Oil level, AMC etc.)
AMC Coordination with utilities with its applicability and Its paperwork.
Identifying ...
1 Opening(s)
8.0 Year(s) To 12.0 Year(s)
Not Disclosed by Recruiter
Duties and responsibilities
Design of Plastic & Rubber Injection Molds
Knowledge in DFMA, GD&T, RPT & FMEA.
Part Feasibilities report.
Mold flow Analysis.
Carryout Moldflow Analysis for various parts & to support the Product and Tooling team
Part Design optimization to reduce War-page to improve strength & stability during New product development.
Determine number & location of ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
2.00 LPA TO 3.00 LPA
Job description
Should be perfect in welding/ fitting/ alignment as welder/Fitter.Fitting for utility equipment like compressor, cooling tower, DG Set, Blower, Heat Exchanger, Material handling equipment.
Required Candidate profile
Candidate Should have at least 5 years of experience in fitter and have worked as foreman.
Job description
Should be perfect in welding/ fitting/ alignment as ...
1 Opening(s)
25.0 Year(s) To 30.0 Year(s)
18.00 LPA TO 24.00 LPA
mechanical maintenance of mill, &equipment's like ejector ,blowers, furnace, pullout roller, roller table, stands, pendulum shear, rotary shear, loppers ,water box, laying head ,conveyor, pallet area, coil forming area. ,garret, funnel line, pinch roll, coiler, walking beam , accumulator, hydraulic unit, grease unit, lubrication unit, compressors, pumps, cooling tower, dg ...
1 Opening(s)
15.0 Year(s) To 18.0 Year(s)
17.00 LPA TO 18.00 LPA
Position: Sr. Manager - Maintenance
Location: Vapi
Experience: 15 – 18 Years
Industries: Chemical
Responsibilities:
Manage the maintenance department that provides technical, project management, emergency response, trouble shooting and preventative maintenance support for process related equipment.
Develop, maintain, and justify the departments ...
1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
18.00 LPA TO 20.00 LPA
Position: Asst. Manager/Manager - Project (Electrical)
Location: Bhopal
Experience: 10 - 12 Years
Industries: Pharma
Responsibilities:
CAPEX budgeting, Cost Estimation, along with the user department.
URS/MDS preparation along with the user department.
Reviewing of basic engineering & detailed engineering of equipment’s.
Reviewing of process flow Diagram & Piping & Instrumentation diagram(P&ID).
Change control ...