1 Opening(s)
0 To 5.0 Year(s)
1.00 LPA TO 8.00 LPA
. Working on 7nm and 5nm designs with various customers for deployment of Aprisa place
and route tools. . Expertise in solving custorner's problems for critical designs to achieve
desired performance, area and power targets. . Responsible to develop flow and methodology
for doing placement, CTS and routing. . Provide training and technical ...
1 Opening(s)
0 To 1.0 Year(s)
2.00 LPA TO 4.00 LPA
The selected consultant will be required to support for To support of component
level design validation (application based)
which includes performance, durability and regulatory tests. (especially fuel,
ex
The selected consultant will be required to support for To support of component
level design validation (application based)
which includes performance, durability and regulatory tests. (especially fuel,
exhaust & steering system components/aggregates), while adding value to each task.
haust & steering system components/aggregates), while adding value to each task.
1 Opening(s)
3.0 Year(s) To 4.0 Year(s)
4.00 LPA TO 8.00 LPA
Job Title-Stamping Die Design EngineerEducationalQualification -Diploma holders from NTTF, CITD, IGTR are preferred.BE, Mechanic al Engg less preferred.Domain-Stamping Die DesignSkill Set-Catia V5 / NXJob Description Shee
t Metal (Press tool) Die designer f or 3D & 2D die designs for Automotive BIW & Structural parts.
Should be proficient with Catia V5 /NX ...
2 Opening(s)
1.0 Year(s) To 7.0 Year(s)
1.80 LPA TO 3.50 LPA
Urgently Require for Reputed Company @ Aurangabad.
1 ) Designation - Design Engineer (Nos 2)
Education:- BE - Mechanical / DME / ITI
Experience: - 1 To 3 Year In UG
Salary: - 1.8 to 2.20 LPA
Job Location: Waluj, MIDC Aurangabad
2 ) Designation - Design Engineer (Nos 2)
Education:- BE - Mechanical / DME / ITI
Experience: - 4 To 7 Year In UG
Salary: - 2.50 to 3.50 ...
2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Require Candidate for the post of Design Engineer (SPM)
Position: – Design Engineer (SPM)
Experience: 3-5 Years of Experience in Design Engineer
Skill: Should have knowledge in 3D modelling like Catia, Solid Edge, Solid Works, Pro E etc.
Candidates working or worked in Automation/ SPM units will be preferred.
Should have good communication skills, hard-working
Salary Budget: - up ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
Design Engineer creates, analyzes, and improves hydraulic lifting systems, specializing in cylinder design, power units, and control valves. Key responsibilities include creating 3D models and 2D manufacturing drawings, performing hydraulic circuit calculations, and ensuring compliance with safety codes
Key Responsibilities
System Design: Design, develop, and detail hydraulic elevator components, including hydraulic cylinders, pumps, tanks, ...
2 Opening(s)
3.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 7.00 LPA
Duties & responsibilities:Electrical Design & Development:• Design and develop control panels, MCC, PCC, PLC panels, and VFD panels, meeting industry standards and client specifications.• Create and review detailed electrical drawings, including power circuit diagrams, single line diagrams (SLD), I/O drawings, and cable schedules.• Utilize Electrical AutoCAD and EPLAN software for ...
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
Not Disclosed by Recruiter
Designation: Sr Design Engineer
Department: Design
Qualification: Degree or Diploma mechanical with English medium, Microsoft office efficiency , Email etiquette etc
Must Exp: Autocad with 2 -4 years in HVAC prefer
Location: Bharuch
Job description:
Hands on exp in HVAC design, heat load calculation , equipment selection , duct design, pump heat load , Autocad skilled, VRV , AHU, Ductable Design exp
FAIS software entry (Training will be ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
Not Disclosed by Recruiter
The job description is as below:
Preparing Room Layout for Pre & Post orders.
Preparing P&ID and General arrangements Drawings for Pre & Post orders.
Preparing and leading design reviews for Long Lead items.
Preparing 3D Model in Software.
Preparing Bill of Material in ERP System for Production and Purchase team.
Cooperation with Clients for technical ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
Not Disclosed by Recruiter
Responsibilities:
Researching, creating detailed technical drawings, and collaborating with other teams to ensure designs that align with production capabilities.
Developing new ideas for processes to make them more efficient.
Modifying existing systems or developing new ideas for processes to make them more efficient.
Ensuring product design meets project timelines and budgets.
Collaborating with other staff ...