3 Opening(s)
8.0 Year(s) To 15.0 Year(s)
4.00 LPA TO 5.00 LPA
Designation: Tool & Die Maker/Mould MakerExperience: 8 to 15 Years
Qualification: ITI in Fitter/Tool & diemaker / Diploma / IGTR
Job Profile:
Conventional & progressive tooling's experience
Experience in Die making/Mould Making
Plastic Moulds & Press Tools, Pressure Die Casting will be an added advantage.
Location: Dhule
Salary up to: 5 LPA
for more detail call on 9765567506
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 4.00 LPA
Hiring for Tool Room Supervisor
Post: Tool Room Supervisor
Experience: Min 2 Years
Qualification: Diploma/B.Tech (Mechanical), ITI(Tool-Die maker(Die-moulds))
A diploma in Tool And Die Making from NTTF should be preferred.
Salary: up to 4LPA
Skills: Injection molding, Plastic molding, Tool & Die maker
Job-Role & Key Responsibility:
Candidate must have supervisory experience in a mold ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.50 LPA TO 3.00 LPA
Qualification: Diploma in Tool & Die making / CIPET, Tool & Die Maker / Mold maintenance & AssemblerExperience: minimum 2 to 5 yrsWork location: Vasai East in MumbaiSalary: Rs 20000 to 25000 per month
Job profile:Must have experience in Injection Mould (Plastic / Rubber) / Die & Fixtures assemblies, maintenance and also ...
1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
2.50 LPA TO 3.00 LPA
Qualification: Diploma in Tool & Die making/ CIPET, Tool & Die Maker / Mold maintenance & AssemblerExperience: minimum 4+ yrs
Job profile:Must have experience in Rubber Injection Mould/Die & Fixtures assemblies, maintenance and also involve in Tool Die making.Responsible for taking trial of new mold, modification, and its approval.Hand on experience ...
1 Opening(s)
5.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 3.60 LPA
Job description
Roles and Responsibilities
Mold Maintenance Engineer
Male
1
5 to 6
CIPET in Plastic mold technology or Diploma in tool and die making.
Competency to design, troubleshoot prepare specifications and verify the design for molding tools
Vendor Management skills for tool manufacturing, design and tool correction / modification.
Knowledge on continuous improvement in Tooling to achieve cost ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 5.00 LPA
Hiring for Tool Room Engineer/Technician for Electrical Lamination punching Tool Room
Post: Tool Room Engineer/Technician
Experience: Min 02-06 Years
Qualification: Diploma/B. Tech (Mechanical), ITI(Tool-Die maker(Die-moulds))
A diploma in Tool And Die Making from NTTF should be preferred.
Salary: up to 5 LPA
Job-Role & Key Responsibility:
Development of tools, progressive tool, ...
2 Opening(s)
1.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.40 LPA
candidates shouls have knowledge &processing plastic material P.C,ABS,TPU
Diploma or ITI in Mechanical - Tool and Die making
2-3 years of work experience
Experience in Press Tool setting & Maintenance
Ability to work on conventional machine as required
Good Communication (English & Kannada) and Result Oriented
Prefer candidates who can shift/stay near our factory at Hoskote
...
12 Opening(s)
2.0 Year(s) To 15.0 Year(s)
1.80 LPA TO 7.00 LPA
Hiring for Tool Room department Two, Three & Four wheeler Plastic Moulded Components Manufacturing Industry in Aurangabad & Ahmednagar MIDC
Designation: Technical Asst. 05
Department: Mould Maintenance Department/tool room
Job Profile Description:
He would be qualified IGTR/CIPET/ITI/GTTC
Relevant Experience- 4-5yrs
Job Location: Waluj MIDC, Aurangabad
----------------------------
Designation: Sr. Die Maker 03
Education: PGDT, TOOL & DIE MAKER
Department: Mould Maintenance Department/tool room
Job Profile Description:
He ...
3 Opening(s)
0 To 3.0 Year(s)
0.96 LPA TO 1.20 LPA
Experience required for the Job: minimum 1 years / Fresher
Annual Salary of the Job: Rs. 8,000/- to 10,000 K
Job Location: Aurangabad
Qualification : ITI / Other Diploma Holder / Knowledge regarding the Opening
Experience : Minimum 01 years / Freshe
Detail Responsibilities:
* Well Versed know of tooling used
* Candidate should be knowledge of die making and proper ...
14 Opening(s)
Not Mentioned To 15.0 Year(s)
1.80 LPA TO 7.00 LPA
Company Profile: A company located at North Maharashtra, a 25 yrs. experienced company in Sheet metal, DBs, & Precise Press Component
Manufacturing of switchgear component, progressive press tool and moulds at Jalgaon MIDC is looking for experienced
Candidates for their expansion & exiting requirements as under
Required Positioned as under
1) DM / AM ...