1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 4.00 LPA
Candidate should have ITI qualification and 3 year experience as Fitter in a large TMT Bar Mill.
5+ years of relevant experience in ROLLING MILL as a mechanical Fitter Should be able to design tools and should be result oriented with time limit.o Minimum 3 to 7 years of Industry experience ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Maintenance Shift In charge
Education: DEE / BE Electrical
Experience: Min 6 Years in Rolling Mill / Steel Industry
Job Profile: Working in a general shift, make daily job planning, manpower planning as per rolling section.
Responsible for doing pm-1(preventive maintenance) jobs .shift schedule and daily checklist follow-up,
Responsible for Electrical & Automation Maintenance of 600-meter long HAPL Line consist of Entry section, RCM Welder,6-HI Cold / Hot Rolling Mill, Furnace, Scale Breaker, Shot- Blaster, Pickling, Entry-Mill & Exit Loppers & exit Section.
Responsible for handling all maintenance related activities of ABB PLC's,AC Drives,AC Motors and DCS 800xA System and LT and HT switch Gears used in the plant
Knowledge in logic solving in control panels & various interlocking schemes required for automation and analyzing all drawings related to automation & control systems.
Instrumental in coordinating with various internal departments and contractor personnel for safe execution of shutdowns and ensuring implementation of routine/preventive/breakdown maintenance schedules of the system to increase machine uptime, equipment reliability thereby.
Responsible for maintaining 5S activity & safety measures regularly
To co-ordinate with the Electrical contractor for Execution, Erection, and Commissioning
Basic Knowledge of Sheet CENTER GUIDE and STEERING UNIT, EDGE System provided by EMG.
Knowledge of hardware Communication between Drives, PLC and HMI’s through Fiber Optic and Profibus.
Knowledge of Gauge Measurement system provided by IMS used at 6 HI in Line Mill.
Responsible for keeping a record of the daily power consumption, daily delay report, spare parts list of the plant.
Basic Knowledge about Control-Logix / Compact-Logix systems of Allen-Bradley PLC (Rockwell Automation).
Identifying NetLinx networks for use in a Logix5000 System used for in-line Welder.
Successfully accomplished Erection, testing, Commissioning of ARP System(Acid Recovery Process
To maintain records, logbook for the job carried out.
Organize safety meetings & give on the Job training to my subordinates
To ensure good housekeeping in the area and the shop floor.
Take participate in IMS internal audit and prepare all supporting document
To maintain a record of bypass of trip & interlock as per the procedures.
Working on SAP (Plant Maintenance Module).
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
For more details call on 7249840333 / 9765567506
Send CV on career@paradiseplacement.co.in
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
10.00 LPA TO 12.00 LPA
Urgent Requirement for Manager PRODUCTION Wire Rod Mill for Reputed Steel Plant at raipur.
To look after Daily Production . Handling of Raw Material to Finish Product. Daily/ Monthly production costing & analysing. Work Planning as per requirement of production. To communicate with Management for implementing at the work Designing & implementing systems, procedures & ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Quality Lab Chemist
Education: Bsc / Msc Chemistry
Experience: Min 5 Years in Steel Industry / Rolling Mill
Job Assignment in Lab :
• Checking the specification percentage in the coolant, measuring the oil concentration, Checking the Cl, Fe Percentage in mill Process, Inspection the Final Rolling On Mill Process.
•Checking the CGL Line Zink Bath Testing
•Daily Reporting Process Control, Reporting The SOP Process
•Working In 5 ‘S’ Process
Job Assignment in CGL line:
•Checking the steel sheet, Checking Hardness HRB & VPN, Bend testing, LFQ (long farming testing), measuring the thickness & width, Defects on Sheet, Checking the Zinc Coating, Checking The I Value.
•Clearing the Quality CGL Line in SAP
•Reporting the SOP Process
Job Assignment In CRM Line:-
•Checking the steel sheet, Checking Defects on Sheet, Measuring the thickness & width.
•Clearing the Quality CRM Line in SAP.
•Reporting the SOP Process.
Water Test: PH, Alkalinity Hardness, Conductivity, Chloride, HCN, Total NH3, Phenol, C.O.D., B.O.D.,D.O, Oil & Grease, Mlss, Mlvss, TDS, SS, Sulphaide, Phosphate.
By Product: Tar Moisture, Tar Dust & Tar Fog, TI, and BI.
Gas Analysis orsat apparatus CO2, CmHn, O2, CO, CH4, and H2.
Estimation of NH3, H2S, Naphtha.
Coke & Coal Ash: Estimation of Coke & coal ash:
SiO2, Al2O3, CaO, MgO.
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
for more details call on 7249840333 / 9765567506
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 3.60 LPA
An Electrical Incharge for a Cold Rolling Mill is responsible for the overall electrical operation and maintenance of the mill. This includes ensuring the safe and efficient operation of all electrical equipment, troubleshooting breakdowns, and implementing preventive maintenance programs. They may also be involved in the design, installation, and commissioning of new electrical ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
A Dispatch Rolling Mill job involves coordinating and overseeing the dispatch of finished steel products from a rolling mill, ensuring efficient logistics and timely delivery to customers, while also managing inventory and ensuring compliance with specifications.
Here's a more detailed breakdown of the responsibilities and requirements:
Key Responsibilities:
Dispatch Planning and Coordination:
Receive and process ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
Urgent Requirement for Turner for Reputed Integrated Steel Plant
The responsibilities of a Turner include, but are not limited to, working with a team to provide excellent quality and service to the Rolling Mill through the turning of various rolls by CNC Lathe machine.This includes operating multiple CNC Lathe machines, tracking ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.20 LPA TO 2.40 LPA
PRACTICAL EXPERIENCE IN AUTOCAD & CATIA KNOWLEDGE IN MACHINE DESIGNING,DRAFTING & DRAFTING,KNOWLEDGE IN MS OFFICE EXPERIENCE IN ROLLING MILL,SMS,CCM
PRACTICAL EXPERIENCE IN AUTOCAD & CATIA KNOWLEDGE IN MACHINE DESIGNING,DRAFTING & DRAFTING,KNOWLEDGE IN MS OFFICE EXPERIENCE IN ROLLING MILL,SMS,CCM
PRACTICAL EXPERIENCE IN AUTOCAD & CATIA KNOWLEDGE IN MACHINE DESIGNING,DRAFTING & DRAFTING,KNOWLEDGE IN MS ...
1 Opening(s)
20.0 Year(s) To 30.0 Year(s)
20.00 LPA TO 30.00 LPA
Urgent Requirement for GM PRODUCTION Rolling Mill for Reputed Steel Plant at Raipur.
To look after Daily Production . Handling of Raw Material to Finish Product. Daily/ Monthly production costing & analyzing. Work Planning as per requirement of production. To communicate with Management for implementing at the work Designing & implementing systems, procedures & manuals ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
3.50 LPA TO 4.80 LPA
Urgently Required MECHANICAL FOREMAN for a leading construction company for SMS/ROLLING MILL Shall distribute manpower to specific work location and follow-up progress.
senior Foreman shall supervise the execution of work specified in the contract and works requested by the Company site representative. Shall be provided with a mobile for quick communication.