1 Opening(s)
2.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 4.80 LPA
Experience in PET Preforms molding.Exp in Husky Pet Candidate is having good material( PET) processing knowledge.Candidate must have good knowledge of handling Husky preform molding machine.Candidate must have good knowledge of Resin Dryer like Piovan and Plastic system.Candidates have the ability to work independently and as part of a team.Knowledge of ...
2 Opening(s)
5.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 8.00 LPA
Job Description: Service Engineer - Injection Moulding Machines
Key Responsibilities:.Installation and Commissioning: Install and set up injection molding machines, robots, and automation equipment at customer sites, ensuring proper configuration and functionality.
Maintenance and Repair: Perform routine and preventive maintenance on injection molding machines, including replacing hydraulic components (rams, seals, valves), electrical systems, ...
2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 3.00 LPA
Job description
Carrying out the injection molding machine installation, commissioning and service including monitoring machine parts, trouble-shooting.
Setting up and trouble-shooting hydraulic valves and hydraulic cylinders.
Trouble-shouting minor electronic and electrical issues of machines.
Setting process parameters in machines for required product with minimized and reduced cycle time to utilize the maximum production output ...
1 Opening(s)
3.0 Year(s) To 15.0 Year(s)
3.00 LPA TO 4.00 LPA
Mold engineers are responsible for designing and engineering molds and dies used in manufacturing processes, especially in plastics molding. They may work on a variety of projects, including blow molds, injection molding, and die-casting
Molding is a manufacturing process that involves shaping a liquid or malleable raw material by using a fixed frame; known ...
2 Opening(s)
4.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 7.00 LPA
Job description
Carrying out the injection molding machine installation, commissioning and service including monitoring machine parts, trouble-shooting.
Setting up and trouble-shooting hydraulic valves and hydraulic cylinders.
Trouble-shouting minor electronic and electrical issues of machines.
Setting process parameters in machines for required product with minimized and reduced cycle time to utilize the maximum production output ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
4.00 LPA TO 4.80 LPA
We are looking for a dynamic and detail-oriented Application Engineer to join our Smart Solutions Department. Smart Solutions Department specialises in Industrial Robot & IML (In-Mould Labelling) & Auxiliary Equipment (Hot Air Dryer, Auto Loaders, Dehumidified Air Dryers, Mould Temperature Controllers) for injection Moulding Machines, Smart Factories & IOT Solutions.
Kindly ...
1 Opening(s)
8.0 Year(s) To 12.0 Year(s)
Not Disclosed by Recruiter
Duties and responsibilities
Design of Plastic & Rubber Injection Molds
Knowledge in DFMA, GD&T, RPT & FMEA.
Part Feasibilities report.
Mold flow Analysis.
Carryout Moldflow Analysis for various parts & to support the Product and Tooling team
Part Design optimization to reduce War-page to improve strength & stability during New product development.
Determine number & location of ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
5.00 LPA TO 6.00 LPA
Position: Sr. Engineer - Maintenance
Location: Jaipur, Rajasthan
Experience: 3 - 5 Years
Industries: Plastic
Responsibilities:
Preventive & Corrective Maintenance:
Develop and execute preventive maintenance schedules for extrusion, injection molding, blow molding, thermoforming, and ancillary equipment.
Diagnose mechanical/electrical breakdowns and execute timely corrective actions.
Minimize machine downtime and production ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.70 LPA TO 4.00 LPA
Job Description
Support all trials until the tooling has been approved
Actively pursue opportunities to reduce cost and cycle times
Continue to monitor and improve dies currently running in the operation
Research and analyze customer design proposals, specifications, manuals, or other data to evaluate the feasibility, cost, or maintenance requirements of designs or applications
Provide ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 7.50 LPA
Position- R&D and QC Manager
Experience- Medical device manufacturing industry,( 5 to 10 years with credibility).
Joining – Within a month from appointment
Factory Location- Bhatpore GIDC, Surat, Gujarat.
Qualifications & Requirements for
Education
Bachelor's degree in Engineering with Knowledge of Polymer Science or Technology.
M Sc in Polymer Science or related field.
Skills&Knowledge
Strong understanding ...