1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
20.00 LPA TO 30.00 LPA
Qualification: BE in Plastic / Mechanical OR PG in CIPETExperience: 15 to 25 years in manufacturing of Automobile plastic injection molded parts.Industry Exposure: Must be from Auto industry Tier 1 or Tier 2Team size handling: 10 - 15 staffs and around 500 workers (Both regular and trainees)
Candidate Requirement:Must have Manufacturing exposure ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
JOB RESPONSIBILITES / KRA
1. Operation of injection molding machinery
2. Responsibility for in-house and vendor-end production
3. Set daily, weekly, or monthly production plans along with raw materials and manpower.
4. Responsible for tool changes, setting process parameters, and production output.
5. Carry out routine maintenance on injection molding machines and auxiliary equipment.
6. Working with ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Job involves preventive maintenance and breakdown maintenance
of plastic injection moulding machines, LT & HT lines, DG sets and
other electrical and mechanical equipment present in the company.will also be part of the planning team for construction of a new unit
coming in the premises for all electrical and mechanical requirements.
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 5.00 LPA
Job involves preventive maintenance and breakdown maintenance
of plastic injection moulding machines, LT & HT lines, DG sets and
other electrical and mechanical equipment present in the company.will also be part of the planning team for construction of a new unit
coming in the premises for all electrical and mechanical requirements.
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 2.40 LPA
Domestic And Industrial Wireing All Electrical Problem Attend Maintenance of motor . 3 Phase Induction Motor Connection Maintenance of all LT panel All Portable Equipment Checkknowledge of injection molding machine maintenance is must Electrical maintenance
Must be ITI Electrician with 2-3 year in injection molding machine maintenanceComputer knowledge work in in shift.
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.20 LPA
Job description
Immediately hiring for reputed Injection Moulding company@ Dadra And Nagar HavelliPost: Electrical MaintenanceQual: Diploma/Degree in ElectricalExp: 3 to 7 YrsSalary: As per the interviewRole: Maintenance Engineer
Industry Type: Plastic
Department: Production, Manufacturing & Engineering
Employment Type: Full Time, Permanent
Role Category: Operations, Maintenance & Support
Education
UG: Diploma in Electrical, B.Tech/B.E. in Electrical
Key Skills
Skills highlighted with ‘‘ are preferred key skills
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
4.00 LPA TO 5.00 LPA
New product development for foundry castings:
Accountable for Technical review of customer drawings & specifications.
Giving technical assistance to moulding department During sample casting production.
Perform dimensional inspection and complete reports and interpret results.
Involved in new part development & Improvement in the regular production items.
PatternDesigning
Accountable for Design all new tooling and communicate design ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 6.00 LPA
02.04.23
HPS-2023/211
EHS Officer
Male
1
4 - 6
Diploma/BSc Fire and Safety
From Fabrication industry involving Painting , 7 tank Pre-treatment process, ETP/ STP must
Essential duties and responsibilities
1) Exposure and handling of ETP/STP operation, phosphating operation and moulding, mainly handling environment-Legal related aspect of the plant
2) Identifying unsafe conditions and actions and analysing incidents and ...
2 Opening(s)
10.0 Year(s) To 10.0 Year(s)
4.80 LPA TO 4.80 LPA
JOB DESCRIPTION :
Shift In charge
Male
2
10 to 10
12th
Expert knowledge of injection molding process
Role Production Manager / Supervisor
Industry Type Petrochemical / Plastics / Rubber
Department Production, Manufacturing & Engineering
Employment Type Full Time, Permanent
Role Category Operations, Maintenance & Support
Education
UG :12th in Any Specialization, Other Graduate
Key Skills
Injection Molding Machine Shift Management
Maintenance
Skills highlighted with ‘‘ are preferred key skills
About Company:
Printing ink , Manufacturing ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
15.00 LPA TO 18.00 LPA
New vendor development, Process costing of parts,
New parts development in Sheet Metal, Plastic/Rubber, Steel casting, Al Extrusion, Spot Welding, Projection Welding, Hot/Cold Forging, Gear Parts, Tubler Parts, Sleeve Extrusion, CNC/VMC/TMC Machining, Sintered, Troub Parts, Sliding Head, Al Casting, PP Fibre Non-woven Fabric, PSF Fibre Dope Dyed, Low melt, Fleeze Fabric, ...