2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
Not Disclosed by Recruiter
CNC- Job Professional Summary
1. Knowledge of CNC machines.
2. Knowledge of reading CNC machines drawings & reading CNC machines
List count.
3. Knowledge of working / handling on all kinds of measurement like
vernier caliper ,micrometer etc.
4. Education *ITI / Diploma * is Must.
5. Prepare Updated CV or Resume
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
CMM(Co-ordinate Measuring Mchine)
Responsible for monitoring in-process inspection and final inspection.
Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc.
Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.00 LPA TO 3.00 LPA
Key Responsibilities:
Communicate with co-workers and supervisors
Follow written and verbal instructions
Complete batch records
Label containers and products
Operate Tablet Pressing and Encapsulation equipment
Test, evaluate, and document results of various quality criteria of supplements produced as outlined by applicable SOPs and Batch records
Adjust equipment controls using hand eye coordination and dexterity with various control ...
1 Opening(s)
3.0 Year(s) To 8.0 Year(s)
3.40 LPA TO 3.60 LPA
Description:
We are looking for a qualified QC Line Inspector to join our dynamic team at our factory in Bhagwanpur,Roorkee. As a QC Line Inspector, you will play a crucial role in ensuring the quality of our productsthrough systematic inspection processes.1. Quality Control Conduct thorough inspections of production lines to ensure ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 6.00 LPA
For over five decades, the company has consistently met the stringent requirements of major OEMs both domestically and internationally. Their relentless commitment to excellence and the timely adoption of cutting-edge technologies have earned them the reputation of being a preferred vendor in the industry. Renowned for their competitiveness in Cost, ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.60 LPA
Job Description
27/04/24
HPS/2024/267
PPD Engineer
Male
1
2 to 3
DME/BE/BTECH -Mechanical
1) B.E Mechanical - 01 nos. (Male Only)
With 3 years of Exp.
1.1 Ensure proper production planning to meet 100% dispatch plans.
1.2 Manufacturing feasibility study of new drawings.
1.3 Preparation of stage 1st drawings.
1.4 Preparation of DOPC drawings.
Develop Production Plan & detailing all tasks to meet predicted completion date .Monitor Production and raw material cost. Prepare report about ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 4.20 LPA
Job Description
27/04/24
HPS/2024/263
PPC Engineer
Male
2
2 to 3
DME/BE/BTECH -Mechanical
1) B.E Mechanical - 02 nos. (Male Only)
With 3 years of Exp.
Develop Production Plan & detailing all tasks to meet predicted completion date .Monitor Production and raw material cost. Prepare report about productivity processes.Monitor production status and ensure timely delivery.
Production Planning, Co
Micrometer , Vernier Caliper ,Try Square, Pie Tape,
Manpower handling ,
Shop Floor Housekeeping,
Team Player & ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.50 LPA TO 4.00 LPA
Description:
We are looking for a qualified QC Line Inspector to join our dynamic team at our factory in Bhagwanpur,Roorkee. As a QC Line Inspector, you will play a crucial role in ensuring the quality of our productsthrough systematic inspection processes.1. Quality Control Conduct thorough inspections of production lines to ensure ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
5.00 LPA TO 9.00 LPA
Location :- Markal / Moshi
Deep knowledge of tooling.Knowledge of reading drawings.Knowledge of Fixture accessories must.Knowledge of cutting parameters on machines.Knowledge of SOP.Knowledge of CNC operating panel buttons.Knowledge of Vertical Machine Centre.Knowledge of Offset.Knowledge of measuring instruments.Good Analytical & problem-solving skills.Working knowledge with Micrometer, Jyoti, BFW.Handled minimum 10 machines.Good communication skills.