1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
15.00 LPA TO 50.00 LPA
- Should be B.E (Mechanical)/BE (Metallurgy)/DME/D.Met
- The candidate has to be in a DGM/GM position for more than 05 years and should be looking after the entire Foundry operations (Plant level) including Maintenance.
- Sound in Foundry technology, process, equipment (Green Sand Moulding, High Pressure Moulding Line, Induction Furnace)
- Systems oriented ...
3 Opening(s)
0 To 1.0 Year(s)
1.20 LPA TO 1.80 LPA
Job description:
HPS-2023/280
QC Engineer
male
1
0 to 1
BSc Cipet/Diploma Plastic
Injection Moulding and Compression Moulding Manufacturing units required
A quality checker assures that the items are safe and fulfil
the manufacturer's specifications before they leave the factory or facility.
They inspect each product to ensure uniformity and that buyers obtain a standard and suitable product.
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.50 LPA
Must be Good knowledge of Mould Loading Unloding
Production Process
To control the various parameter of Moulding Machine.
To control the various problem in Moulding part.
Manpower handle and production planning.
Maintain 3R on shop floor
Maintain 5s activities.
Mould unload/loading.
Maintain 4M on shop floor.
Root cause analysis & problem solving of defects such as short shots, flash, ...
1 Opening(s)
18.0 Year(s) To 20.0 Year(s)
20.00 LPA TO 24.00 LPA
Developing, reviewing and reporting on the business development division’s strategy,
ensuring the strategic objectives were well understood and executed by the team Impacting organisation profitability through effective strategic and tactical management
decisions and new business development Leading team to meet demand fulfillment by ensuring On-Time-In-Full (OTIF) supplies against budget / forecast ensuring ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
This position will have the overall accountability to:
• Ensure that Production shift Incharge has experience in Blow moulding machines (like Uniloy, Bestar, Tongda, Jagmohan, IBM Victor & CMP machines).Be the dedicated formulation expert.
Machine process set-up, minimize rejection/wastage and max. Capacity utilization of machines.
• Hourly production monitoring based on cycle time ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
1. New molds trails and validation.
2. Attend troubleshooting & regular mold start-up.
3. Process simplification, standardization and optimization.
4. Monitor 5S, KAIZEN, 7QC tools, activities.
5. Manpower handling and deployment.
6. Routine Production & shop-floor documentation.
7. To achieve daily target as per plan with highest level of quality.
8. Coordinate with other departments for smooth ...
3 Opening(s)
0 To 2.0 Year(s)
1.44 LPA TO 1.80 LPA
s a Technical Support (Tech Support) Worker, you will be tasked with monitoring and maintaining an organization’s Plastic Injection Moulding and Compressing Moulding and networks. You will be responsible for diagnosing any hardware or software faults with these systems and will solve the issues either in person or over the phone.
Technical ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 5.00 LPA
Hiring for Quality Engineer for Plastic Moulding division in Manufacturing Industry
Position: Quality Engineer
Qualification:- B.E Diploma 5+ "Experience of plastic moulding will be preferred"
Job Location: Chitegaon MIDC, Aurangabad
Bus facility available
If you are interested kindly send your updated CV to career@paradiseplacement.co.in
for more details call on 9765567699
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 4.20 LPA
Job description
HPS/2022/178/694/121
Electrical Maintenance Engineer
Male
1
2 to 7
Diploma In Electrical
Job Role involves the following
Executing Production and Packing tasks Assigned
Supervising workers and ensuring that targets are met
Manufacturing as per BOM
Desired Candidate profile :
Able to execute instructions.
Must work well in teams
Posses Good Communication skills
Quick Learner
Willing to work in shifts
Ability to supervise effectively and complete tasks ...
5 Opening(s)
2.0 Year(s) To 8.0 Year(s)
1.40 LPA TO 4.80 LPA
Sales & Marketing / Sales Coordination : 5 Position (Male/Female) ,Qualification : BE(Mechanical),CIPET,MBA(marketing)., Experience : 2 to 8 Years (Exp in plastic industry or heavy machinery)
JD:- Experience in customer handling ; Coordinate With Customers, Business Development , Proficient with Tally, ERP, MS Office Good communication skill in written as well as verbal.Preferences : Should be living ...