173 Job openings found

1 Opening(s)
2.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 4.80 LPA
Experience in PET Preforms moulding.Exp in Husky Pet Candidate is having good material( PET) processing knowledge.Candidate must have good knowledge of handling Husky preform moulding machine.Candidate must have good knowledge of Resin Dryer like Piovan and Plastic system.Candidates have the ability to work independently and as part of a team.Knowledge of ...
1 Opening(s)
5.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 4.20 LPA
 Position:         Executive - Mould Room Location:        Umbergaon Experience:      5 - 6 Years Industries:       Packaging   Responsibilities:         Support preventive maintenance and daily repair of injection moulding Machine , and auxiliary equipment Trouble shoot and diagnose fault with IM machine and ensure prompt corrections in safe ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 3.00 LPA
  Job description: 17/08/24   HPS/2024/494 Quality Checker/SS Casting Male 1 1 to 3 Diploma/BE Mechanical   Injection Moulding and Compression Moulding  Manufacturing units required   A quality checker assures that the items are safe and fulfil   the manufacturer's specifications before they leave the factory or facility.   They inspect each product to ensure uniformity and that buyers obtain a standard and suitable product.        
7 Opening(s)
2.0 Year(s) To 8.0 Year(s)
3.60 LPA TO 4.20 LPA
Position: Machine Operator Designation: Tech – II/Tech Lead - I Department: Production, PET Dept. Location: Pashamylaram Qualifications / Experience: Candidate having 4 - 8 years of Experience in PET Preforms moulding. Candidate with Diploma - Electrical, Mechanical and CIPET-DPT is preferred. Good communication skills with reasonable proficiency in English speaking & writing. Candidates with manufacturing background are preferred. Job Description Candidate ...
1 Opening(s)
12.0 Year(s) To 15.0 Year(s)
12.00 LPA TO 15.00 LPA
Overseeing production related tasks including planning, control and trouble shooting in Injection Moulding M/c. Insure the utilization of Mirror & Air filter assy. Setting up production targets and achieving the same within time. Optimizing man & machine utilization to achieve pre-set production targets. Undertaking resource planning for optimizing man & machine utilization, reducing ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
4.50 LPA TO 5.00 LPA
Qualification: B.E. / Dip. in Electrical EngineeringExperience: 3 to 6 Years from Cast and Iron FoundryLocation: Chakan, PuneCurrent Notice Period: Not more than 15 Days Job Requirement:1. Should be aware of foundry equipment, Koyo moulding machines. Sand Plant, Eirich Mixer.2. Knowledge of Induction furnace, EOT cranes.3. Should have good knowledge of ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
Qualification: B.E. - Mechanical / Dip. in Mechanical EngineeringExperience: min 10 to 15 Years in Foundry IndustryWork location: Bhosari in Pune Job description:1. Hands on Experience on Sand plant equipment (Mixer, RTC, Muilticooler, Bucket elevator, belts, vibrofeeders, Pneumatic conveying, Dust collector etc.), Moulding line,Utility equipment, Pump house equipment.2. Exposure to breakdown maintenance, ...
1 Opening(s)
6.0 Year(s) To 7.0 Year(s)
5.00 LPA TO 6.00 LPA
To Plan the Preventive Maintenance Schedule for all machines of the plant and set the check points of machines during the preventive maintenance as per the machine manual and as per working environment. Installation of Conveyor lines (Realty Engineering) for SDA, Water Purifiers, and Iron. Routine Maintenance of Conveyor lines i.e. motor ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
7.00 LPA TO 8.50 LPA
) Develop, implement and maintain QMS, EMS, OH&S 2) New customer specification feasibility report 3) Maintaining customer technical specification, drawings records and documents 4) Preparing techno commercial offer 5) Conducting internal ISO audits 6) Preparing agenda and minutes for MRM 7) Monitoring departmental KPI 8) Develop and maintain ISO manual, sop, work instructions, process flow chart, QAP 9) ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.60 LPA
  Job description Urgent Requirement!!. Operating and monitoring plastic injection molding machine Setting up and adjusting machines, tools, and equipment Following standard operating procedures and safety protocols Troubleshooting and resolving machine malfunctions Conducting regular maintenance and cleaning of machines Inspecting and testing finished products for quality and adherence to specifications Keeping accurate production records and reporting production data to ...

Drop Your CV

We will consider your Profile for future Jobs

Submit Profile