3 Opening(s)
1.0 Year(s) To 7.0 Year(s)
1.44 LPA TO 1.80 LPA
Job Description:
Responsibilities
1) MIG welding on auto parts.
2) TIG welding 2/3 wheelers components.
3) Ark Welding
3) SMAW welding for reworking
1) Testing and Training to New Joinded Welders
Economieser Coils Welding in TIG
Super heater Coil Welding with TIG + Arc Welding
Job Location : Shendra MIDC , Aurangabad
for more details call on 9765567699
2 Opening(s)
7.0 Year(s) To 15.0 Year(s)
4.20 LPA TO 5.00 LPA
Education DME/BE in Mechanical or production with minimum 7 yrs to 15 yrs experience in PPC Department with similar industry.
Job profile: - Reporting to management about the monthly Forecast.- Knowledge of manufacturing setup for production & acting as manufacturing consultant.- Directly responsible for all kind of welding related set-up, issues, ...
5 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 4.20 LPA
- Fabrication of pipes.- Able to read Fabrication & Isometric Drawings.- Handling Shop Floor Activities - Marking, Cutting, Bending, Fit-up, Welding.- Manpower handling & Daily Production Reporting.
Production & Shop-Floor Execution:
Supervise daily fabrication, cutting, fitting, and assembly processes on the shop floor.
Ensure production targets are met on schedule without compromising safety ...
- Technical Terms: Heavy Fabrication
- Structural Steel
- Ibr (indian Boiler Regulations)
- Rdso Standards
- Composite Steel Girders
- Bow String Girders
- Pre-engineered Buildings (peb). Processes & Skills: Smaw/gmaw/gtaw Welding
- Blueprint Reading
- Cad Detailing
- Non-destructive Testing (ndt)
- Quality Assurance (qa/qc)
- Shop Floor Operations. Equipment/components: Superheater Coils
- Economiser Coils
- Headers
- Bed Coils
- Heat Exchangers
- Foot Over Bridges (fob).
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
3.60 LPA TO 5.00 LPA
Production & Quality :
Receive Drawings from drawing department and issue the same to production supervisors.
Guiding production supervisors to proper job distribution as per delivery schedule.
Monitoring of Production status and leveling up the Priorities to meet the targets.
Prepare and Finalize the lay-up sequences of jobs.
Raw material inspections & verification of test ...
1 Opening(s)
12.0 Year(s) To 18.0 Year(s)
17.00 LPA TO 18.00 LPA
Position: Plant Head
Location: Pune
Experience: 12 - 18 Years
Industries: Engineering
Responsibilities:
Plant Establishment/Setup Phase
Facility planning: Plan and design the shop-floor layout for pipe spool fabrication (cutting, beveling, fit-up, welding, NDE, PWHT, blasting/painting, and dispatch bays) to achieve 60,000 dia-inch/month across two shifts.
Capacity planning: Prepare capacity, ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 4.80 LPA
Description :We are looking for a detail-oriented Quality Engineer with experience in fabrication quality control and assurance.Key Responsibilities :
Must have the knowledge of Mechanical Structural Drawings.
Demonstrates a strong command over inspection processes, all welding quality and compliance with industry standards.
3Must have knowledge of WPS/PQR/Welder Qualification
Excellent communication Skill with Project Clients ...
1 Opening(s)
5.0 Year(s) To 25.0 Year(s)
10.00 LPA TO 12.00 LPA
Quality Engineer – Welding & Steel Fabrication
Position Summary
The Quality Engineer oversees all quality-related functions within a welding and steel fabrication operation. This role ensures that fabricated components meet or exceed customer specifications, industry standards (AWS, ASME, ISO, AISC, etc.), and internal quality requirements. The Quality Engineer leads the quality team, ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
10.00 LPA TO 12.00 LPA
Designation : Welding Manager or In-charge
Education : DME/ Btech /BE ( Mechanical) / preferred Certified Welding Engineer
Experience Required : Min 10+ Years (Relevant Experience)
Industry Preference : Heavy Fabrication Industries / Piping Spools / Pressure Vessels / Heat Exchangers / Process Equipment Manufacturing
CTC : 10 to 12Lakh PA
Company Location : Manglej (Nr. Vadodara)
Transportation : Yes ...
1 Opening(s)
3.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 6.00 LPA
� TODAY WALK-IN INTERVIEW | MULTIPLE TECHNICAL POSITIONS | JAMNAGAR / DAHEJ 🚨
🏭 Utilities Projects & Service Pvt. Ltd.
📅 Interview Date: 05-07-2026 (Sunday)
🔹 Open Positions
Mechanical Engineer
Boiler Engineer
Instrumentation Engineer
Electrical Engineer
Electrician (B Class License Mandatory)
Sr. Engineer – Mechanical
Sr. Engineer – Electrical (C Class License Mandatory)
Sr. Engineer – Instrumentation
Boiler Operator (1st Class & ...