2 Opening(s)
1.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.50 LPA
Qualification: B.E/B.Tech or Diploma in Electrical Engineering with 1 to 6 yrs exp in cost estimation of Electrical projects / Control Project.Post: 2 nos (JR & SR)Job profile:working experience in electrical design and costing, estimation of electrical projects like control panels.Candidate must be familiar with tendering process of all public ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 2.50 LPA
Education: ITI/ Diploma in Electrical Experience: 1 to 3 years experience in electrical maintenance of Pneumatic, Hydraulic Circuit, Electrical Circuit, Panel Wiring, PLC, Fixture Maintenance, Cylinder. Sensor etc.Location Preferred: Pune / PCMC Job Location : Hinjewadi Phase 2
Job description: Electrical maintenance Preventive Maintenance PlanningExperience in Pneumatic , Hydraulic Circuit, Electrical ...
1 Opening(s)
3.0 Year(s) To 8.0 Year(s)
2.40 LPA TO 7.20 LPA
A WHRB (Waste Heat Recovery Boiler) DCS (Distributed Control System) Operator manages and monitors high-pressure steam generation and heat recovery processes from a central control room in industrial plants such as steel mills, sponge iron units, or captive power plants.
Key Responsibilities
DCS & Panel Operation: Monitor and control boiler parameters—including steam ...
- Dcs Operator
- Atmospheric Fluidized Bed Combustion Operator
- Atmospheric Fluidized Bed Boiler Operator
- Dcs Operator
- Distributed Control System Operator
- Dcs Control Room Operator
- Boiler Dcs Operator
- Boiler Control Room Operator
- Control Room Operator
- Central Control Room Operator
- Ccr Operator
- Boiler Control Panel Operator
- Boiler Shift Operator
- Boiler Shift Incharge
- Dcs Shift Operator
- Dcs Shift Incharge
- Boiler Operator
- Boiler Attendant
- Boiler Technician
- Boiler Incharge
- Boiler Supervisor
- Boiler Engineer
- Power Plant Dcs Operator
- Thermal Power Plant Operator
- Industrial Boiler Operator
4 Opening(s)
5.0 Year(s) To 10.0 Year(s)
0.00 LPA TO 30.00 LPA
Position: Sales Engineer
Location: Eastern Region, Saudi ArabiaNationality: Egyptian OnlyExperience: 5–7 yearsIndustry: Electrical, Instrumentation, Automation & Data Communication
Position Overview
The Sales Engineer will be responsible for developing strategic customer relationships, identifying new business opportunities, and driving sales growth in Saudi Arabia. The role will focus on industrial customers across the Electrical, Instrumentation, ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
3 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Carry out preventive, breakdown and routine electrical maintenance of plant equipment.• Troubleshoot and maintain Motors, MCC, PCC, Control Panels, VFDs, Starters, Contactors, Relays and electrical circuits.• Attend electrical breakdowns and ensure minimum equipment downtime.• Maintain and troubleshoot pumps, agitators, compressors and other plant machinery electrical systems.• Check and maintain cables, ...
1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
15.00 LPA TO 25.00 LPA
Job Title: General Manager – Electrical / Electrical Head Industry: Sponge Iron / DRI / Power Plant / Steel Plant Department: Electrical Maintenance / Power Plant Experience: 15–25 Years in Sponge Iron, DRI & Captive Power Plant Qualification: B.E./B.Tech/Diploma in Electrical Engineering
Key Responsibilities
Lead the complete Electrical Department for Sponge Iron/DRI ...
- Electrical Head
- Gm Electrical
- Sponge Iron
- Dri Plant
- Captive Power Plant
- Power Plant Electrical
- Ht/lt
- Transformer
- Ht Panel
- Lt Panel
- Mcc
- Pcc
- Vfd
- Motors
- Switchgear
- Substation
- Power Distribution
- Whrb
- Afbc/cfbc
- Preventive Maintenance
- Predictive Maintenance
- Breakdown Maintenance
- Electrical Troubleshooting
- Energy Management
- Rca
- Loto
- Electrical Safety
- Project Management
- Team Management
- Sap/erp.
3 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Key Responsibilities:• Carry out preventive and breakdown maintenance of electrical equipment.• Troubleshoot motors, starters, MCC panels, DBs, control panels and electrical circuits.• Handle installation, testing and maintenance of electrical equipment and plant wiring.• Attend electrical breakdowns and ensure minimum equipment downtime.• Perform maintenance of motors, pumps, lighting systems, cables and ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
Company is an online platform that makes learning music and the performing arts engaging, accessible, and technology-driven. We connect students with experienced teachers and are looking for an organized, proactive person to support our growing team.
What you’ll do
Help create content and marketing communications.
Track enquiries, leads and registrations from different online channels.
Update ...
1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
Not Disclosed by Recruiter
The Role
Full accountability for delivery of the MES production plan — on time, to specification, at planned cost. The role combines production planning and control with shop-floor management.
This is a builder's role. The Factory Manager is expected to set up systems personally, then manage using them. Minimum 60% of working ...