1 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Desired Candidate Profile: Should experience in Chemical Industries. Must be very good in writing and speaking English, Hindi and Gujarati.Desired Experience: Minimum 3 years of experience in Chemical IndustriesDesired Qualification: AnyJob Type: Full-timeWorking Hours: 9:00 am to 6:00 pm (not limited to, work may require to spend extra time to ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
0.00 LPA TO 0.00 LPA
Senior Planner / Scheduler, experienced in the construction of Cross-Country Pipelines
He shall have minimum 5-10 years of experience in Planning of Design, Procurement, construction, Pre-Commissioning, andCommissioning of hydrocarbon facilities, Pipeline, Piping, Plant Process Equipment’s installation, structural, associated Civil, E& I and Pre-commissioning, Commissioning and Handover activities. He shall be ...
3 Opening(s)
4.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 3.60 LPA
Job description
25/01/2024
HPS/2024/35
Supervisor Electrical Maintenance
Male
3
4 to 7
Diploma in Electrical or Electronics
JOB SUMMARY -
Repair electrical systems, wiring, circuit breakers, equipment and other components so that they remains at full functioning capacity.
Test systems with devices such as voltmeters, oscilloscopes and ohmmeters to ensure the system remains safe and that components are compatible.
1. Drives ...
1 Opening(s)
3.0 Year(s) To 9.0 Year(s)
4.00 LPA TO 10.00 LPA
B.E (Mechanical /Electrical/Instrumentation) with 6 to 10 years of experience in OSD pharma facility.
Having Strong knowledge of
o Utility operations and maintenance
o Water system operations and maintenance
o HVAC operations and maintenance
o Requalification activities
o QMS documentation like SOP preparation, Change control, Qualification documentation preparation etc.
Plant maintenance and calibration experience would be added advantages.
3 Opening(s)
0 To 3.0 Year(s)
2.16 LPA TO 2.40 LPA
Designation: QC Engineer To achieve the target of Hydro Test and ECT test as per planning. To make ensure required parts are available in stoke for maintenance/new jobrequirement. Raise indent for required items and get approval from higher authority. To line up Hydro test requirements as per JOB/QAP requirements in ...
10 Opening(s)
8.0 Year(s) To 15.0 Year(s)
8.00 LPA TO 25.00 LPA
Piping Designer
Experience of developing Equipment layout, Piping arrangement, Piping isometric drawing, BOQ, Hangers and supports
Good working knowledge of MicroStation 2D/3D, AutoCAD. Experience of PDS/ SP3D/ PDMS and excel preferred.
Equipment layout for large coal based, combined cycle power plant
Piping arrangement/ isometrics.
Hangers and supports Design
Piping, fitting, valve and piping specialties BOQ
10 Opening(s)
4.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 25.00 LPA
Hands on experience in Piping Stress Analysis for Power Plant.
Good understanding of ASME B31.1/ASME B31.3 code ASTM, ASME BPVC, IS code and IBR code.
Should be well versed in using Caesar II software.
Should be familiar with working in 3D environment.
Knowledge of Pipe Support Engineering, Hanger Datasheet preparation.
Selection and selection and design ...
3 Opening(s)
8.0 Year(s) To 10.0 Year(s)
12.00 LPA TO 18.00 LPA
Division
PMT
Position
Project Manager, experienced in the construction of Cross-Country Pipelines
Job Location
Saudi Arabia
Year of Experience
8 - 10 years
Education
Engineer – preferred Mechanical Engineer
Roles & Responsibility
Seeking a Project Manager experienced in the construction of Cross-Country Pipelines.
The ideal candidate should have deep experience in Engineering, Procurement and Construction of pipelines.
Essential duties:
(1) Project Management Professional, Oversee ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 5.00 LPA
Location :- Bhosari
Plot Plan Layout
Equipment layout Drawings
Study piping layout
Review of architectural, civil & structural Drawings
Piping Isometics
Pipe Stress Analysis Calculations
Plant Layout Comments loads to all other disciplines
Piping Mechanical Specifications
Special Studies
Special Piping (SP) Item Calculations, Drawings, and Data Sheets
Special Piping (SP) Item Requisition Worksheets
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 7.00 LPA
Location :- Piping Engineer
Prepare stress calculations and nozzle loads summaries demonstrating Code compliance and prepare a Stress Analysis Report containing calculations and information for each piping system analyzed (when required by the Client).
The Candidate shall be able to perform
Pipe Stress Analysis Calculations
Plant Layout Comments loads to all other disciplines
Piping Mechanical ...