1 Opening(s)
7.0 Year(s) To 12.0 Year(s)
5.00 LPA TO 7.00 LPA
Handling of continues carburizing Furnaces(Made By Dongwo surface Tech Ind).
Handle all Heat Treatment Shop Floor Including Shot Blasting Machine, Shot Peening Machine, Thread Softening Machine, MPI Machine, Straightening Machine.
Checking of samples (Case Depth, core hardness, Micro Structure)
Checking of inward samples (surface hardness, microstructure, grain structure)
Handle Endo Gas Generator
Handling of wet Lab(Cutting, Mounting, Polishing.)
Operating of Brinell Hardness Tester, Rockwell Hardness Tester, Vickers Hardness Tester, Microscope Millipore Checking, Spectro Test.
Fill up all JH Sheets, DWM data OEE Sheets. Utility Consumption aw Material Inspection for crack, Hardness, Micro-structure, Grain size Measurement, Decarburization level and Inclusion level measurement and defects if any with traceable documents.
Inspection of heat treated parts for surface hardness, Effective case depth, microstructure analysis, decarburization level (if any) and defects if any with traceable documents.
Research & Development work like the selection of an appropriate heat treatment cycle without sacrificing customer requirements.
Monitoring the heat treatment process continuously and taking the remedial action if any deviations are found.
Heat treatment vendor development, Vendor process monitoring, and product inspection.
Maintaining the Metallurgical equipment that is as follows
Metallurgical Microscope ( Leica ) – DM 2800
Micro Vickers Hardness Tester ( Future tech) – FM 300
Vickers hardness tester ( Future tech) – FV 800
Digital Rockwell Hardness Tester ( Future tech) – FR – 3e
Analog Rockwell Hardness Tester.
Abrasive cutting machine ( Chennai metco )
Molding machine ( Chennai Metco )
Double Disc Polishing Machine ( Chennai Metco )
Belt grinding machine ( Chennai Metco)
Brinell Hardness Tester
Muffle Furnace (Techno).
Carrying out of furnace and process validation with proper traceable documents and calibrating the metallurgical instruments with appropriate service parties as per schedule.
Job Location: Waluj MIDC, Aurangabad
Send CV on Career@paradiseplacement.co.in
for more details call on 9765567506 / 7249840333
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
Post: Officer Health & Safety
Salary: upto 3.00 LPA
Job Profile:
The Officer Health & Safety under the directions of Director (HR&PR) is responsible for ensuring that all Health and Safety activities across the various business units and sites are coordinated and consistent with S&H Policy. He is responsible for providing all personnel of the ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 3.80 LPA
Post: Heat Treatment Engineer / Assistant Manager
Experience : 3 to 6 Years
Salary: 4 LPA
JOB RESPONSIBILITIES:-
Handling of continues carburizing Furnaces(Made By Dongwo surface Tech Ind).
Handle all Heat Treatment Shop Floor Including Shot Blasting Machine, Shot Peening Machine, Thread Softening Machine, MPI Machine, Straightening Machine.
Checking of samples (Case Depth, core hardness, Micro Structure)
Checking of inward samples (surface hardness, microstructure, grain structure)
Handle Endo Gas Generator
Handling of wet Lab(Cutting, Mounting, Polishing.)
Opearting of Brinell Hardness Tester, Rockwell Hardness Tester, Vickers Hardness Tester, Microscope Millipore Checking, Spectro Test.
Fill up all JH Sheets, DWM data OEE Sheets. Utility Consumption aw Material Inspection for crack, Hardness, Micro-structure, Grain size Measurement, Decarburization level and Inclusion level measurement and defects if any with traceable documents.
Inspection of heat treated parts for surface hardness, Effective case depth, microstructure analysis, decarburization level (if any) and defects if any with traceable documents.
Research & Development work like the selection of an appropriate heat treatment cycle without sacrificing customer requirements.
Monitoring the heat treatment process continuously and taking the remedial action if any deviations are found.
Heat treatment vendor development, Vendor process monitoring, and product inspection.
Maintaining the Metallurgical equipment that is as follows
Metallurgical Microscope ( Leica ) – DM 2800
Micro Vickers Hardness Tester ( Future tech) – FM 300
Vickers hardness tester ( Future tech) – FV 800
Digital Rockwell Hardness Tester ( Future tech) – FR – 3e
Analog Rockwell Hardness Tester.
Abrasive cutting machine ( Chennai metco )
Molding machine ( Chennai Metco )
Double Disc Polishing Machine ( Chennai Metco )
Belt grinding machine ( Chennai Metco)
Brinell Hardness Tester
Muffle Furnace (Techno).
Carrying out of furnace and process validation with proper traceable documents and calibrating the metallurgical instruments with appropriate service parties as per schedule.
Job Location: Chikalthana MIDC, Aurangabad
Send CV on Career@paradiseplacement.co.in
for more details call on 7249840333
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
2 Opening(s)
4.0 Year(s) To 8.0 Year(s)
4.00 LPA TO 5.00 LPA
Qualification: Diploma / BE in Mechanical, production or Automobile with 4 to 8 yrs experience in Quality department for metallurgical testing, metal powder pressed parts.
Job profile:
1. Responsible for inspection. should involve in in-process, inward and pre-dispatch inspection activities.2. should have PPAP documentation knowledge.
3. exp. in handling customer complaints, prepare CAPA, ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
Not Disclosed by Recruiter
Qualification: Diploma or BE in Electrical Experience: 1 to 3 years experience in electrical assembly, wiring schemes/logics and Handle manpower effectively.Gender: MaleWork location: Pimpri in Pune
Job description:Understanding of basic electrical.Able to read and understand wiring schemes/logics.Handle manpower effectively to complete the project assignment within time frame.Handle inspection / testing of control panel, Electricals / ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
1.80 LPA TO 2.50 LPA
Responsible for dispatch of automobile components as per clients scheduleInvolve in final inspection of materialPrepare reports for foundry/automobile products
1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 3.60 LPA
Qualification : Diploma/BE, Bsc, Any GraduateRequired Exp : 4 to 10 years ( Exp. From Rubber manufacturing Or in Chemical Manufacturing plant) Salary : 25k to 30kJob Profile :- Inward, Inprocess and final inspection. SIR for new development Parts- Packing guideline- Layout inspection as per annual plan- Experience in SPC, MSA, ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.50 LPA TO 2.50 LPA
Diploma or BE in Mechanical, 1 to 3 yrs experience in inspection of machining components.Look after inprocess, inward and predispatch inspection of machining components.
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.20 LPA TO 1.80 LPA
- Diploma / BE in Mechanical or production with 1 month to 3 yrs experience in Quality / inspection of press / sheet metal stamping parts.- Knowledge of measuring instuments like - Vernier caliper, Micrometer, Height guage, Trimos, all types of Gauges.- Knowledge of will be added advantage- Salary: Rs ...