1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 5.50 LPA
Position: Security Incharge
Location: Sanjan nearby Vapi
Experience: 5 - 8 Years
Industries: FMCG
Responsibilities:
Head and regulate all securities activities
Taking Rounds Regularly in Day & Night in all Units
Responsible for Fire and emergency rescue system
Should have knowledge of First Aid
Should have knowledge of Emergency happen ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
2.28 LPA TO 2.64 LPA
Safety Compliance & Audits: Regularly inspect plant machinery, shop floors, and operations to ensure compliance with factory safety acts, OSHA/local statutory rules, and company EHS guidelines.
Hazard Identification & Risk Assessment (HIZA): Identify potential workplace hazards, evaluate risks, and recommend preventive or corrective control measures.
Permit-to-Work System: Manage and monitor safety permits ...
- 1. Job Titles & Role Keywords Safety Officer Ehs Officer (environment
- Health & Safety) Hse Engineer Plant Safety Supervisor Safety Inspector Industrial Safety Specialist Fire & Safety Officer 2. Core Technical & Operational Skills Hazard Identification And Risk Assessment (hira) Job Safety Analysis (jsa) Permit-to-work (ptw) System Incident Investigation & Root Cause Analysis (rca) Safety Audits & Inspections Toolbox Talks & Safety Briefings Emergency Preparedness & Mock Drills Ppe (personal Protective Equipment) Management Occupational Health & Safety (ohs) 3. High-risk Operations & Safety Domains Hot Work Safety Working At Heights Confined Space Entry Electrical Safety Fire Fighting & Prevention Lifting & Rigging Safety Chemical / Material Handling Safety
2 Opening(s)
4.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 6.00 LPA
Preventive & Predictive Maintenance Perform preventive maintenance (PM) activities as per the defined schedule on delegated machines. Monitor and ensure efficient performance of all process machines. Check and maintain performance of utility equipment and forklifts. Take daily utility readings and immediately inform the Maintenance Supervisor in case of abnormalities. Monitor ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
JOB DESCRIPTION
Operator – Cutting & Packing Machine
Department: Cutting & Packing MachineLevel: Technical OperatorNo. of Openings: 1Experience: 3–5 yearsEmployment Type: Full-time
Qualification
ITI / Diploma in Mechanical, Fitter, Production or relevant trade.
Reporting To
Production In-charge / Shift Supervisor
Preferred Background
Sandwich-panel cutting / bandsaw / packing line experience preferred.
Role Purpose
Operate panel cutting/bandsaw and packing equipment to ...
3 Opening(s)
4.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 6.00 LPA
Preventive & Predictive Maintenance Perform preventive maintenance (PM) activities as per the defined schedule on delegated machines. Monitor and ensure efficient performance of all process machines. Check and maintain performance of utility equipment and forklifts. Take daily utility readings and immediately inform the Maintenance Supervisor in case of abnormalities. Monitor ...
10 Opening(s)
0 To 1.0 Year(s)
1.00 LPA TO 1.80 LPA
Position: Line Operator
Location: Vapi
Experience: 0 - 1 Years
Industries: Electronic
Responsibilities:
Candidate should keep production lines moving by operating machinery and equipment.
Candidate should meticulously inspect products for defects, ensuring only top-quality items proceed.
Candidate should follow protocols and handle hazardous materials carefully
Candidate should check and maintain Routine Maintenance ...
1 Opening(s)
0 To 1.0 Year(s)
2.00 LPA TO 2.40 LPA
Position: Machine Operator
Location: Silvassa
Experience: 0 - 1 Years
Industry: Packaging
Responsibilities:
Operate plastic processing machines as per SOP and production requirements.
Assist in machine setup, start-up, shutdown, and basic parameter adjustments.
Monitor machine temperature, pressure, speed, cycle time, and other operating parameters.
Ensure proper feeding of raw materials and smooth production ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
2.00 LPA TO 3.00 LPA
Job Summary: Responsible for supervising electrical installation, maintenance, repair, and troubleshooting activities at the plant/site. The Electrical Foreman ensures work is completed safely, efficiently, and according to technical standards and schedules.
Key Responsibilities
Supervise electricians and electrical technicians on daily activities.
Plan and allocate electrical maintenance and installation work.
Monitor electrical equipment, motors, panels, ...
1 Opening(s)
10.0 Year(s) To 20.0 Year(s)
Not Disclosed by Recruiter
Position: Lead Machinist / Cell Leader
Location: Kingdom of Saudi Arabia
Department: Production / Manufacturing
Reporting To: Production Supervisor / Operations Head
Company Overview
Kanoo Unimech is a joint venture specializing in the manufacturing, remanufacturing, repair, and servicing of critical components for the Oil & Gas industry. The facility utilizes advanced CNC machining technologies, Horizontal ...