1 Opening(s)
7.0 Year(s) To 10.0 Year(s)
9.00 LPA TO 10.00 LPA
Boiler Control room plc, DCS operation
Boiler running General maintenance and operation
Boiler Shutdown works
Inspect safety devices on a daily basis, running tests and reporting any unusual situations. Monitor boiler water and fuel levels, making adjustments and activating valves as necessary to keep the boiler operational. Maintain records of operation, fuel and ...
2 Opening(s)
0 To 1.0 Year(s)
2.00 LPA TO 2.50 LPA
Qualification: Degree or Diploma in Mechnical, Production, AutomobileExperience: 0 to 1 yr in Unigraphic (NX) & Autocad software knowledge mustWork location: Chakan in Pune
Job description:Must have knowledge of Unigraphic (NX) / UG NX software & Autocad.Tool room design ( die, mould & pattern core box knowledge )Creo 3d software. Knowledge ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
5.00 LPA TO 6.00 LPA
Knowledge of all types Injection mould.
Knowledge of Pressure Die Casting
Knowledge of Wirecut Programming & Operating.
Knowledge of Electrical Discharge Machine (EDM)
Knowledge of Lathe , Milling, Surface Grinding Machine
Electrical Discharge Machine (EDM) & Wirecut Operating and Programming
Candidates Must Be ITI With 4-5 Year Experience In Tool Room As an WEDM Operator
5 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 4.20 LPA
Candidates must be Good Experience in Tool Room As Cnc milling operetor
operating , programming & setting of Cnc/Vmc/Hmc machines.
♦ Make Cnc/Vmc & Hmc programming &setting
♦Work on Hedenhein,Hass,Fanuc controller
Maintaining good quality and less machining time with the help of feed , r.p.m. & depth of cut according different of ...
1 Opening(s)
7.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.00 LPA
Hiring for Tool Room Industry
Position: Executive Design Engineer
Following should be considered as competency level while looking for the candidate;
Job Description :
Qualification : B.E. / B.Tech. or M.E. / M.Tech.
Experience: 7+ Years (Not below 5 years in SPM design).
CAD Software Proficiency: Solid Edge / Creo.
Should be expert in the software application.
Should be able to do Engineering Calculations.
Should have good knowledge in application ...
2 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.44 LPA TO 2.16 LPA
Hiring for Tool Room Industry
Position: Junior Design Engineer
Following should be considered as competency level while looking for the candidate;
Job Description :
Qualification : Diploma / B.E. / B.Tech.
Experience: 1 to 2 Years.
CAD Software Proficiency: Solid Edge, AutoCAD, Creo
Should be expert in the software application.
Good drawing interpretation skills.
Expert in manufacturing drawing detailing.
Should have basic knowledge of manufacturing processes & tool room activities.
Should be able to complete the task strictly as ...
2 Opening(s)
2.0 Year(s) To 4.0 Year(s)
5.00 LPA TO 6.00 LPA
Operated CNC [HMC, VMC] machines and loaded and unloaded parts, minor machine offsets, minor tool changes debarred, measured and documented
Cnc operator Worked in tool assembly and tool work and machine maintenance and milling, turning, drilling, shaping, grinding, wire cut, electrical weld, and cnc milling, cnc turning
Operated CNC machines and loaded ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.64 LPA TO 3.00 LPA
Handling breakdown maintenance of Moluds
Coordinate with production department for Preventive Maintenance
Set up and operate machine tools
Fit & assemble parts to make & repair dies.
Cavity Polishing.
Sheet matel die tool room & new sheet metal die manufacturing .
Die loding and unloding craine opreting .
All die drilling work and drill radial machine operating.
Job ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.50 LPA TO 3.00 LPA
Must be Diploma/B.E in Rubber, cipet ,
Should have 02 to 05years of Rubber Industry excluding Tyre and Footwear
Should have Technical knowledge of Silicone
Should have knowledge of ISO:9001, HSE:14001 & OHSAS:
Should be certified ISO
Should have knowledge of Clean Room
Should have knowledge of Rubber Testing
Must have good command over English Language written ...
1 Opening(s)
0 To 3.0 Year(s)
1.40 LPA TO 1.50 LPA
Job description
Supervising & monitoring the construction activities civil, electrical & installion of D.G.Set, A.C, as per drawing &bull Site Engineer, Drawing & Estimation, RRC Details. &bull Materials, reinforcement & foundation Checking &bull Logistic, Supervision of erection of tower according to drawing &bull Preparation of working schedules for network build out ...