1 Opening(s)
5.0 Year(s) To 6.0 Year(s)
5.00 LPA TO 6.00 LPA
Position: Production Engineer - ISBM
Location: Umbergaon
Experience: 5 - 6 Years
Industries: Plastic
Responsibilities:
Knowledge of plastic materials and Injection Blow Molding (IBM) process
Production planning and scheduling to meet targets
Conducting new mold trials and validating molds
Troubleshooting process, machine, and mold issues
Operating and monitoring machines and ancillary equipment
Performing mold changeovers safely and efficiently
Machine start-up ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Requirement :
Position : Jr. Instrumentation Engineer
Experience : 1 – 3 Years Salary Budget : 3.00 LPA
Location : Vadodara (Akota)
🔧 Job Summary
We are seeking a Jr. Instrumentation Engineer with 1–3 years of experience in instrumentation design and engineering to support project development and execution. The role involves assisting in instrumentation ...
1 Opening(s)
10.0 Year(s) To 18.0 Year(s)
36.00 LPA TO 39.00 LPA
Job Title: Project control Manager, experienced in the construction of Cross-Country Pipelines.
Job Location: Saudi Arabia
Year of Experience: 10 years
Education- Engineer
Roles and Responsibilities-
Control and Manage the Project of all phase’s interns of project planning, scheduling, Monitoring, Reporting, Change Management & Control etc.
Schedule Management.
Cost Management
Change Management
Key Resource Management.
Scope / Change management.
Proposal Management (Bidding Decision and Costing ...
1 Opening(s)
7.0 Year(s) To 12.0 Year(s)
Not Disclosed by Recruiter
Assistant Manager / Deputy Manager (Electrical - Operations
Key Responsibility –
Good knowledge of complete Electrical system consisting of HT Switchgear, Transformer, LT Switchgear, APFC, VFD, Soft Starter, Motors, Cabling, Earthing.
Strong functional knowledge in system study (Short Circuit, Load Flow, Motor Start-up, Transient Stability, Arc Flash).
Relay co-ordination.
Adept in Sizing of Electrical systems ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.16 LPA
A Dust Silo Operator (SID - Steel Industry Department) in a steel manufacturing plant is responsible for the safe and efficient storage, transfer, and handling of bulk raw materials, such as coal, ore, or byproducts like fly ash, within silo systems. The operator ensures a continuous flow of materials to ...
2 Opening(s)
15.0 Year(s) To 20.0 Year(s)
3.00 LPA TO 3.36 LPA
A 1st Class Boiler Operator in a steel pipes manufacturing plant safely manages, monitors, and maintains high-pressure boilers and auxiliary equipment. Their primary objective is to ensure continuous, reliable steam generation needed for steel heating and processing operations while strictly adhering to safety, efficiency, and statutory IBR (Indian Boiler Regulations) ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
2.60 LPA TO 3.00 LPA
A Turbine Operator in a steel manufacturing plant (typically 25MW–39MW+ capacity) is responsible for the safe, efficient startup, operation, and shutdown of steam turbine-generator (TG) units and auxiliary systems to provide consistent power for production processes. This role involves managing parameters such as steam pressure, RPM, lube oil pressure, and ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
2.60 LPA TO 3.00 LPA
A 2nd Class Boiler Operator manages the safe, efficient, and continuous operation of high-pressure boilers and related machinery. Key duties include monitoring gauges (pressure, temperature, water levels), conducting maintenance, water treatment, fuel feeding, and maintaining safety records, typically requiring a 2nd Class Certificate.
Key Responsibilities & Duties
Operational Management: Start up, operate, and shut ...
1 Opening(s)
4.0 Year(s) To 9.0 Year(s)
3.00 LPA TO 3.60 LPA
3. Injection Molding Operator / Supervisor📍 Location: Sanand (Ahmedabad)💰 Salary: ₹2.2 – ₹3.6 LPA (depending on experience)🏢 Employment Type: Full-time (On-site)🔹 Job Overview
We are looking for an Injection Molding Operator / Supervisor with hands-on experience in operating and managing injection molding machines.
🔹 Key ResponsibilitiesOperate injection molding machines and monitor productionHandle ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
12.00 LPA TO 15.00 LPA
A Senior Manager/AGM in a steel company (CCM, Rolling Mill, or Operations) leads production, maintenance, or quality departments, ensuring maximum efficiency, high product quality (billets/slabs/rolls), and safety compliance. They manage teams, monitor process parameters, minimize downtime, and drive process improvements.
Key Responsibilities
Production/Operations: Oversee shift/plant-level operations (e.g., CCM or Rolling Mill), manage start-up/shutdown, and ...