8 Opening(s)
2.0 Year(s) To 10.0 Year(s)
1.44 LPA TO 3.00 LPA
Hiring for Machine Shop & Tool Room Department below post
Shop floor in Charge 01
Min: 3 Years Experience in Machine Shop
Skill: Programming, Job Setting, Operating & Team Handing
Salary: Rs 25000/- to 27,000/- PM
VMC Programmer 01
Min: 2 Years of Experience
Skill: Dell Cam (Siemens Control)
Salary: Rs 18000/- to 20,000/- PM
VMC Operator 02
Min: 2 ...
2 Opening(s)
4.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 6.00 LPA
Post : Engineer/Sr. Engineer/AM/ VMC Shift Supervisor - Machine Shop
No. Of Vacancies: 02
Department: M/C Shop-Tool Room
Description: Having on hand experience on VMC machine in Tool Room for HPDC/LPDC / Plastic Mold die manufacturing .
Working Co-Ordinate Calculation & Programming of Machines
Selection of Tools and Insert
To plan and allocate work to workmen
To ...
1 Opening(s)
8.0 Year(s) To 12.0 Year(s)
12.00 LPA TO 13.00 LPA
Job Summary :
A professional with 8 to 12 years of experience in mould design,responsible for developing high-precision moulds and fixtures for various productrequirements. This role involves performing mould flow analysis, leading trials, andaddressing design-related challenges. The focus is on continuous improvement tooptimize tool performance, cycle time, and product quality. Expertise ...
3 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.20 LPA TO 2.50 LPA
Qualification: Diploma In Tool Room, Press Tool Die Assembly Knowledge, Die Proving, Identify defects in die Proving
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Position: Press Shop Production SupervisorDepartment: Production – Press ShopIndustry: Manufacturing / EngineeringExperience: 2–5 YearsEmployment Type: Full-TimeLocation: Waluj , ch sambhajinagarSalary: As per Industry Standards / Based on Experience
Job Summary
We are looking for an experienced and responsible Press Shop Production Supervisor to manage day-to-day press shop production activities. The candidate will be ...
1 Opening(s)
0 To 3.0 Year(s)
0.00 LPA TO 0.00 LPA
Qualification: ITI / Diploma in Mechanical Engineering, Tool & Die Making, or equivalent technical qualification.Experience: 0 to 3 years of experience operating Wire Cut EDM machines.Department: Tool Room Reports To: Toolroom ManagerWork location: Vasai East in Mumbai
Job Summary:The Wire Cut EDM Machine Operator is responsible for setting up, operating, and ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.64 LPA TO 3.00 LPA
Handling breakdown maintenance of Moluds
Coordinate with production department for Preventive Maintenance
Set up and operate machine tools
Fit & assemble parts to make & repair dies.
Cavity Polishing.
Sheet matel die tool room & new sheet metal die manufacturing .
Die loding and unloding craine opreting .
All die drilling work and drill radial machine operating.
Job ...
3 Opening(s)
1.0 Year(s) To 3.0 Year(s)
4.00 LPA TO 5.00 LPA
We are looking for a dynamic Sales Engineer with 1 to 4 years of experience to drive business growth in our specialized manufacturing segments, including Sheet Metal Fabrication, Tubular Subassemblies, Powder Coating, and Tool & Die making. This role bridges the gap between technical engineering capabilities and market demands for both ...
1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
8.00 LPA TO 10.00 LPA
Manage and Coordinate working of the department
Plan and execute daily grinding operations for components like inner rings, outer rings, and rollers of general bearings.
Set up and operate various grinding machines: Centerless, Bore, Face, OD, Track, and Raceway Grinders.
Ensure critical dimensions, roundness, roughness (Ra), taper, and geometry tolerances are within specified ...
4 Opening(s)
5.0 Year(s) To 9.0 Year(s)
7.00 LPA TO 10.00 LPA
Act as the central point of contact on assigned tool design, lead and guide the work of the tool room.
Designing, developing, and enhancing sheet metal tool design and product.
Facilitate multi-disciplined groups in brainstorming and developing solutions to key aspects of the proposal providing tactical advice and guidance with the ability ...