1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
2.16 LPA TO 2.40 LPA
Perform initial inspection and raise report.
Coordinating between all sites of the company for Quality Control.
Review the process of construction at the site periodically & profess changes to adhere to quality norms.
Following ISO procedures.
Updating ISO documents.
Formulate & Implement Quality Systems in the company.
Review and final approval of the Construction Record Book ...
1 Opening(s)
3.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
Roles & Responsibilities:· Responsible for Production documents verify on daily basis(P verification, Welding strength verify(DT/NDT), Parameter verification, Down time data monitoring, Production data monitoring.)· Responsibility for production planning· Knowledge of Cost of Poor Quality.· Implementation knowledge in Poka-yoke and responsible for Poka-yoke audit plan.· Counter measures through process for direct ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 3.60 LPA
Position: Engineer - Production (Spot Welding Shop)
Location: Aurangabad
Experience: 3 to 4 Yrs
Education: DME / BE Mech
Skills & Experience:
Good knowledge about SPOT welding production process
System Knowledge (Bajaj Auto Related)
TPM Knowledge
If you are interested kindly send your updated resume
----------------------------
Paradise Placement Consultancy
Sheetal Capital” Second Floor, Shop.No.11, Opp. YSK Hospital, Chistiya Chowk, N-5, ...
4 Opening(s)
4.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
SHIFT PRODUCTION ACHIEVEMENT, SHOP FLOOR MANAGEMENT AND MANPOWER HANDLING, LEADERSHIP QUALITY FOR ACHIEVING THE TARGETS WITH AVAILABLE REQUIRED RESOURCES CONTINEUAL IMPROVEMENT SKILLS
Projection & Spot Welding M/C 50 & 75 KVA
Mig Welding 300Apr, Tig Welding
Pipe Bending YLM CNC, Flaring and reducing
Production planning according to schedule
Increasing productivity, Removing Bottlenecks & reducing the ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
0.00 LPA TO 0.00 LPA
Qualification: Any Graduate, ITI, Diploma with experience in Robotic weld programming & Setup, robot maintenance.
Job Description:Robotic welder/ Programmer to weld sheet metal and structural components to specifications provided. Job responsibilities include, but are not limited to, fixture setup, tacking components, monitoring and feeding robotic welder, maintaining quality of weld and ...
2 Opening(s)
4.0 Year(s) To 10.0 Year(s)
3.60 LPA TO 4.50 LPA
Looking for a challenging position, in the area of Press Shop & Fabrication where we can utilize your expertise and Experience in Production
Company type: Mass manufacturing of engineering-intensive industrial products for automotive and other applications.
Position - Senior Production Engineer
Dept - Production
Education - DME / BE
Experience - Min 4 Years
Required Skills-
Must have experience in production activities in Spot Welding & Fabrication
Exposure in TPM, TS
Salary: up ...
4 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
Qualification: ITI – Welder / Turner TradeExperience: 1 to 3 YearsWork location: Shirwal in Pune (on satara raod)
Job Description:We are seeking a skilled ITI Welder / Turner with 1 to 3 years of hands-on experience in sheet metal, Machining, Fabrication and Assembly. Work closely with supervisors and quality control teams ...
10 Opening(s)
2.0 Year(s) To 8.0 Year(s)
2.00 LPA TO 4.50 LPA
Sure, here's a comprehensive Job Description (JD) for a Fabrication Fitter. I'll include key responsibilities, qualifications, and essential skills.
Job Title: Fabrication Fitter
Department: Production/Fabrication
Reports To: Fabrication Supervisor/Manager
Job Summary: A Fabrication Fitter is responsible for accurately reading and interpreting engineering drawings, blueprints, and specifications to lay out, position, align, and fit together ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
1.44 LPA TO 1.92 LPA
An RMP Fitter/Operator's role is to install, maintain, and repair mechanical and electrical systems, often in a specific industry like phosphate production or shipbuilding. They work with blueprints, troubleshoot issues, and ensure safety and quality standards are met. Their tasks include fitting components, welding, cutting materials, and performing routine maintenance and inspections.
Key Responsibilities ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
2.04 LPA TO 2.40 LPA
Fabrication is the process of creating finished products from raw materials, especially metals, by cutting, shaping, and assembling them. It involves various techniques like welding, cutting, bending, and joining, often using machinery and specialized tools. Fabrication can be done on-site or in dedicated workshops.
Here's a more detailed look:
Key aspects of fabrication:
Raw Materials:
Fabrication typically ...