1 Opening(s)
8.0 Year(s) To 12.0 Year(s)
8.00 LPA TO 10.00 LPA
Job Location : Nr. Urse / Bhosari / Alandi - Any One
Gender : Male / Female
Job Responsibilty NPD Part Inspection at all stages NPD Part Process Inspection. NPD Part Layout Inspection. Process Audit Knowledge Product Audit Knowledge.
Candidate Have must be good Knowledge of Part Development and Ppap DocumentationSpecific Requirement:- Dimensional ...
2 Opening(s)
1.0 Year(s) To 4.0 Year(s)
2.00 LPA TO 3.50 LPA
Job Location : Bhosari / Moshi
Gender : Male / Female
Job Details
Dear Candidate,
We are hiring for NPD ENGINEER
JOB DESCRIPTION:
Experience: 5 to 10 YearEducation:Diploma, B-tech, BE Mechanical
Job Responsibilty NPD Part Inspection at all stages NPD Part Process Inspection. NPD Part Layout Inspection. Process Audit Knowledge Product Audit Knowledge.
Candidate Have must be good Knowledge ...
2 Opening(s)
1.0 Year(s) To 4.0 Year(s)
1.44 LPA TO 3.50 LPA
Roles and Responsibilities
We are in requirement of candidates for the position of Quality Engineer.
To work in a Die & Press Shop company.
Knowledge in auto cad is a must for material planning and processing.
Candidates from nearby locality shall be given preference.
Communication in English and Hindi shall be an additional requirement for ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
We have a requirement of Solidedge Design Engineer
Job Description as under:
3 to 5 Yrs. Of exp. in fabrication Drawing and detailing
Auto CAD - Layer command , block command , layout
Structural items into welding , drilling
Drafting , part modelling & Modifications
B) Qualification: DME/ BE/ ITI
C) Salary- Depends on exp (Approx-20000-25000)
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.50 LPA
Software Skills: MS Office, AutoCAD & Solid edge is mandatory. Qualification: ITI Mech ( Male/Female) Experience: 2 to 4 yrs
Sal : 2 to 3 LPA
(Fabrication/HVAC/HEAT EXCHANGER/ Screw conveyer Industry experience will be preferred.) Job Location: Bhosari, Pune.
Should have the knowledge of Auto-CAD. Experience in the field of fabrication of vessels would
be preferred. Preparing ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 2.50 LPA
Key Responsibility:
The candidate should be fluent in English, should have an ability to communicate effectively with a range of audiences.
The candidate should hold good communication and Writing skills.
The candidate should hold Technical Background.
The candidate should have good knowledge of understanding engineering drawings.
The candidate should have an ability to acquire and ...
1 Opening(s)
4.0 Year(s) To 7.0 Year(s)
1.50 LPA TO 4.00 LPA
Key Responsibility:
The candidate should be fluent in English, should have an ability to communicate effectively with a range of audiences.
The candidate should hold good communication and Writing skills.
The candidate should hold Technical Background.
The candidate should have good knowledge of understanding engineering drawings.
The candidate should have an ability to acquire and ...
5 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.50 LPA
Job Location : Pune Banglore Highway
Gender : Male / Female
Need Candidates with PLC / SCADA Knowledge
OOP ( Object Oriented Programming ) Will be Added Advantage
Job Profile :
As a Application Engineer
Scope Of Work
PLC Programming
SCADA / HMI Programming
Control Hardware Design
PLC Panel Designing
Auto Cad
Site Visit
Panel Commissioning
Networking
Support Activity
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 3.00 LPA
Contract Compliance and review of Invoices with Technical and Accounts department
Lsnd Acquisition coordination/checking/payments with Project Office
Responsible for Daily, weekly and monthly MIS reports.
Assist with or manage the technical and commercial requirements on assigned projects/proposals
Monitor and report on project status.
Commercial Coordination with Accounts and Project Office
Assist with Special projects
Responsible for other ...
3 Opening(s)
1.0 Year(s) To 6.0 Year(s)
0.00 LPA TO 3.00 LPA
Experience of working on Solid works & Auto cad is required.
Preparation of Process and Integration(P&I) Diagram
3D Modeling, Part Design, Assembly Generation and G.A Drawing
Product Improvement in Existing Product.
Stage vise Inspection at supplier end during New Product Development
Design of mixer machine and its material handling system
Developing models and designs from conceptual inputs.
Manufacturing, ...