3 Opening(s)
0 To 1.0 Year(s)
1.44 LPA TO 1.68 LPA
JOB DESCRIPTION
Quality
Male
3
0 to 1
B.Sc chem/CI PET
As a Production/ Quality / Supervisor you will be responsible to manage an assigned area or team by planning, organizing and following up production activities to ensure efficient production according to production plans and initiate improvement activities for increased operations efficiency.
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
Job description
Responsibilities
Designing Jig/fixtures/Tools gauges as per process requirements
Machine selection, trial and installation
Process validation
Fixture calibration maintaining critical spare parts for Jigs/Fixtures/Toolings
Understanding of engineering drgs for Stamping, Injection Moulding and Welded parts
Root cause analysis and preventive action implementation
Cycle time calculation, monitoring and improvement.
Preparing Shop floor and Machine layouts
Preparing PFDs, PFMEAs, Control plans, ...
5 Opening(s)
5.0 Year(s) To 8.0 Year(s)
20.00 LPA TO 25.00 LPA
Knowledge off All Types of Injection Mould Hot Runner and semi - Hot runner & Cold runner, Extrusion Blow mould and Injection Streach Blow Moulds
Handeling multicavity moulds
Troubleshooting Spare part arranges
Handel breakdowns and preventive maintenance as per schedule
Implementation of GMP & QMS in shop floor
Checking Process monitoring of MACHINE & MOLD
Looking ...
1 Opening(s)
15.0 Year(s) To 22.0 Year(s)
15.00 LPA TO 25.00 LPA
Experience in implementing departmental policies, goals, objectives, and procedures; conferring with managing director, departmental in-charge and factory staff
Proficient in modern methodical quality systems, production tools & techniques ? Proficient in taking corrective action for any negative trends related to product quality, customer service, machine capacity, labor efficiency, resource utilization, and ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
8.00 LPA TO 10.00 LPA
CMM-CALYSPO (Windows based software used in 3Dco-ordinate measurement m/c for inspection) Uses Roughness tester Mahr model, Used to measurement of surface roughness parameters and Counter parameters of components of Engine parts
Monitoring and controlling of receipt material inspection (Machining, casting, Sheet metal, Molding & Rubber components) and also approved the inspection ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Job description
Ensure safe working condition of all employees. If any unsafe activity observed immediately contact with production head and safety head.
2.To run all machines as per daily production plan (Quality of the product should be as per requirement).
To Achieve daily production target.
To ensure wastage it should not exceed from permissible ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
7.00 LPA TO 12.00 LPA
? To assist in developing & implementing various quality control tests like HighVoltage, Partial Discharge, tracking and erosion test, Tensile & ultimateelongation, Hot elongation, Dielectric strength.? Preparing & maintaining various audit & Inspection reports like OHSAH & ISO.? Handling customer needs and requirements to develop effective QC process? Ensure incoming ...
4 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 3.00 LPA
JOB DESCRIPTION
Production Supervisor
Male
4
2 to 3
Responsibilities:
Responsible to troubleshoot the root cause analysis for production issues, resolve them and maintain the reports
Responsible for participate in all stages of the product development and support processes
Should be able to work closely and coordinate with the tech support and development team
Will be responsible to assist ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.20 LPA TO 2.40 LPA
A Lab Technician is a professional who is involved in every aspect of laboratory work, from recording data to maintaining equipment. They're responsible for various tasks that follow strict guidelines and regulations, including protecting the accuracy and efficiency of experiments while keeping labs organized.
A Lab Technician is a professional who is involved ...
2 Opening(s)
3.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 4.80 LPA
JOB DESCRIPTION
Quality Executive Officer
Male
2
3 to 8
Diploma Plastic/B.Tech/Ci pet/B.sc/M.sc Polymer
Location : Dadra & Nagar Haveli
In process Inspection.
Preparation of dimensional report.
Shift Handling.
Attending Customer place.
Preparation of COA
Knowledge about system & Documentation & maintaining reports.
Manufacturer of plastic scrap, hand tools & other products.