1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 4.20 LPA
o Qualification: No Bar
o Work Location: Sriperumbudur (Close to Chennai)
o Age: Above 25 Years and below 45 Years
o Job Description:
1. Responsible for Hot Forging, Cold Forging & Ring Rolling
2. Achieve Daily Production Targets
3. Co-ordinate with Foundry Team
4. Maintenance of Forging Hammer & Ring Rolling Machine
Benefits of Employment:
Direct Company Roll
Salary
ESI & EPF
Mediclaim Insurance & Accident Insurance for Free
Attendance Bonus
Annual Leave
Gratuity
One Meal per ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
iring for Shift Engineer/Supervisor(Maintenance) in Forging Autocomponent Manufacturer in Aurangabad , Shendra MIDC..
Designation : Shift Engineer/Supervisor(Maintenance)
Education : DME / BE Mechanical
Must Required experience - Forging Experience
Working as Maintenance engineer in shifts MIC (maintenance in charge)
to handle Breakdown and Preventive Maintenance of Machines like,
Mechanical Press (8000T and 1600T), Disa shot Blasting machine,
Megnaflux machine, Reduce Roll, Induction Billet Heater Coils,
Band Saw machine, Descaler Bare Pump,
Conveyors like Cooling conveyor, Flash conveyor, Drop-out conveyor,
Fanuc Robots
To ensure daily maintenance problems communication to the next shift reliever
Independent Maintenance handling
Preventive, Break down maintenance.
Experience : Min 3 Years
Candidate from Forging Shop.
Final CTC- 3.60 Lacs
For more details call on 7249840333
Job Location ...
2 Opening(s)
5.0 Year(s) To 8.0 Year(s)
5.00 LPA TO 6.00 LPA
o Qualification: Diploma / B.E. / B. Tech in Mechancial or Metallurgy or Foundry Technology
o Work Location: Sriperumbudur (Close to Chennai)
o Age: Above 25 Years and below 45 Years
o Job Description:
1. Responsible for day-to-day Melting in Induction Furnace, Pouring and Centrifugal Casting.
2. Achieve Daily Production Targets
3. Manage the entire Foundry Team during the shift
4. Maintenance of Furnace, Casting Machine and other ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
15.00 LPA TO 18.00 LPA
New vendor development, Process costing of parts,
New parts development in Sheet Metal, Plastic/Rubber, Steel casting, Al Extrusion, Spot Welding, Projection Welding, Hot/Cold Forging, Gear Parts, Tubler Parts, Sleeve Extrusion, CNC/VMC/TMC Machining, Sintered, Troub Parts, Sliding Head, Al Casting, PP Fibre Non-woven Fabric, PSF Fibre Dope Dyed, Low melt, Fleeze Fabric, ...
4 Opening(s)
1.0 Year(s) To 2.0 Year(s)
Not Disclosed by Recruiter
Position- Design Engineer D&D
Skills : Creo 2.0 & PLM/Windchill
Qualification:
BE(Mechanical) & (Electrical) with first class throughout ( no gap in education and profession)
Gender: Male
Opening- Mech- 3 nos & Electrical- 1 no.Experience: 1-2 years experience in design; Compulsory knowledge Creo & PLM/Windchill.
PLEASE NOTE THAT IF CANDIDATES ARE SHORTLISTED, THEN THEY HAVE TO COME ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.00 LPA
Hiring for Quality Engineer/Sr. Engineer for Gear Manufacturing.
Post: Quality Engineer/Sr. Engineer
Education: Any graduate
Salary Range: up to 3.5LPA
Minimum 4-5 years of experience cold forging/Fastener
Job Responsibilities:
1. Handling of customer complaint with CAPA and communicate to customer with 8D format.
2. Using customer portal Uploaded document related to quality issue.
3. Ensured and monitoring customer ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 7.00 LPA
Plan, organize, and control complete production operations in the fastener manufacturing unit.
Ensure timely production of bolts, nuts, screws, and other fasteners as per quality standards.
Monitor forging, threading, heat treatment, and finishing processes.
Optimize machine utilization and improve productivity on shop floor.
Implement production planning as per PPC schedule and delivery timelines.
Ensure adherence ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
Not Disclosed by Recruiter
Working Pattern - 5 Days a Week
Design Engineer - Core Competencies
Candidate must be B.E. Mechanical with first class.
Candidate must have minimum 2 experience on NPD/Reverse Engineering projects, competitor benchmarking.
Understand & manage the different phases of APQP.
Experience in Product Design using Creo-6 and above software is mandatory.
3D Modelling as per manufacturing means ...