1 Opening(s)
7.0 Year(s) To 15.0 Year(s)
0.00 LPA TO 30.00 LPA
Position: Maintenance Manager
Experience: 7+ years
Notice: Immediate to 30 days
Location: Nairobi, Kenya (Onsite)
MAIN PURPOSE OF THIS POSITION
Ensuring availability of the appropriate engineering resources to enable safe and efficient plant operations for design and improvement of plant operations.
KEY DELIVERABLES FOR THIS POSITION
R: - Deliver & maintain EHS and regulatory standards
Q: - ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
Job Title : - Metallurgical Engineer
Department : - Heat Treatment
Qualification required: - Diploma/B.E. in Metallurgy
Experience required: - Min 2 years
Budgeted CTC: - No bar
Job Description
He must have knowledge of raw material and their chemical composition, hardness, microstructure, physical properties.
He must have knowledge of Heat Treatment ...
1 Opening(s)
12.0 Year(s) To 13.0 Year(s)
4.00 LPA TO 5.00 LPA
Job description
Roles and Responsibilities
• Strong Product & Process knowledge in Low Pressure Die Casting (LPDC) Part proving, Production Planning and Control, Troubleshooting, Defect analysis and Problem solving• Machine installations, Mould trials & Mould proving• Co-ordinate the entire product development cycle and finalize specifications• Verify chemistry of the metal, Metal tapping ...
1 Opening(s)
4.0 Year(s) To 7.0 Year(s)
4.50 LPA TO 5.50 LPA
Expertise in designing & implementing Best HR Practices, Recruitment, Training & Development, Performance Management.
Representative of Organizational development Interventions, Employee Involvement & Engagement activities & Personnel Policies.
Recruitments
Training & induction Legal Compliances
Performance Management System - PMS
Pay roll Management
Employee Engagement
5’S & Kaizen
Audits Like:- EMS & OHSAS,TS, HR Audits etc.
Administration
Policy Making
Travel Management
MIS
Legal Compliances Factory ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 2.40 LPA
Hiring for Tool Holder Machine Shop Manufacturing Industry
Position: Quality Engineer
Education: Diploma / BE Mechanical
Experience: 2 to 3 Years in the Machine shop, Parts Inspection
Salary: up to 20,000/- PM
Job Responsibilities : -
ISO Documentation (ISO 9001:2015 & ISO14001:2015) + EMSKnowledge of Tool Holder & ColletSAPMS OfficeInspection of partsKnowledge of SPC, MSA, PPAP, FMEA
Job location: Waluj MIDC, Aurangabad
If you are Interested ...
2 Opening(s)
10.0 Year(s) To 18.0 Year(s)
7.00 LPA TO 12.00 LPA
Hiring for Manager & Senior Manager Quality in Corrugated Boxes of 3 ply and 5 ply Manufacturing Industry
Post :
Senior Quality Manager
Quality Manager
Education: Any graduate / Engineering education background candidates should be preferred
Experience: Min 10 Years in Corrugated Boxes Packaging Industries operating the quality management system & Integrated Management System (EMS & OHSAS), TPM, Kaizen, Writing procedures and processes to support the QMS development, internal auditing, ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 4.50 LPA
Position: Senior Engineer Production
About the responsibilities of the position: The main activity of the production supervisor is that he is responsible for all the shop flower activities as peer following job profile. .
Reporting to: Manager
Educational Qualifications: Bachelor of Engineering in the stream of Mechanical / Production. Or Diploma in Engineering in ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
250000.00 LPA TO 350000.00 LPA
Job Description
Designation
Engineer - Automation.
Purpose
To Carry out Maintenance activities at Plant-7, Jigani.
Reporting
AM/DM - Maintenance.
Age
23~ 28 Yrs.
Qualification
Diploma/BE in Mechatronics/Electrical/Electronics/Mechanical
Experience
2-4 yrs. (min) in Manufacturing/Automotive/Automotive components Industry with Rich Experience in Factory Automation Preferably in Robots and Gantry.
Key Responsibilities
· PLC Programming and Machine Interfacing for Automations.
· Maintaining Automation Breakdowns at minimum level.
· Effective ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
5.00 LPA TO 8.00 LPA
1. Employee Details
Employee Code
Employee Name
Department / Functions
PPC
Designations
Team Leader (Manager)
Reporting To
Unit Head
Number of Reportees
Qualification
BE/ DME
Experience
10-15 Years
Unit/ Location
Unit
2. KEY RESPONSIBILITIES:
Sr. No.
Key Responsibilities
Key Responsbilities - Descriptions
1
Material Planning
on Monthly basis material Planning as per customer& Production schedule.
2
Production Planning
Monthly planning as per production capacity and scheduling for In-house as well as outside job work requirement. ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
6.00 LPA TO 7.00 LPA
Maintenance Activities, As Maintenance Senior Engineer
Demonstrated proficiency in planning & implementing the preventive, predictive & breakdown
maintenance schedules for improving the OEE and safety of plant equipments & machinery.
Entrusted with responsibility of Documentation & faced audits of EMS & OHSAS, ISO
Maintenance repairing & spare part cost ...