1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
Hi
We are having urgent opening for EHS Manager in Pune with automotive company.
EHS, Industrial Health, Safety & Environment Management, OHSAS 18001,HSE Management System, ISO 14001,HIRA,Safety Management System, Hazardous Waste Management, Safety Audit, Accident Investigation ,EHS Management ,Environmental Management System.
EHS:
? Responsible for EMS. Identification of unnecessary losses in energy /fuel
consumption (Air, ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
We have an urgent opening in manufacturing company.
The profile is for Senior Engineer.
The location is in Pune, Maharashtra
JD:
Awareness, Adherence & Sustainence of ISO/TS : 16949 Quality Systems in Area of Control
Awareness, Adherence & Sustenance to MSES/AHQ//OHSAS/EMS, Standards and Procedures under area of control
Maintaining all the metallurgical characteristics of the incoming ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.50 LPA
Hiring for Starch powder, liquid Glucose Manufacturing Industry
Electrical Maintenance Engineer 02
Responsibilities:-
Prepare specifications for process equipment
Prepare Equipment installation drawings and ensure the installation of the equipment as per the same.
Review drawings issued by the vendor.
Complete periodic inspections of the vendor's site to check for the progress of manufacturing of the equipment
Plan and ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
10.00 LPA TO 12.00 LPA
Hiring for PCB Manufacturing Industry.
Position: Quality Manager/GM
Qualification: BE - Electronics/Mech/Electrical
Work Experience: 15-20 years
Work profiles:
Additional Knowledge - IATF Internal Audit , Six Sigma Yellow /Green Belt
Preferably from Mechanical / Automobile/ EMS / Electronics / PCB ...
1 Opening(s)
3.0 Year(s) To 4.0 Year(s)
3.00 LPA TO 4.00 LPA
Hiring for PCB Manufacturing Industry.
Position: Customer Quality Engineer
Qualification: BE - Electronics/Mech/Electrical
Work Experience: 3-4 year
Work profiles:
Additional Knowledge - IATF Internal Audit , Six Sigma Yellow /Green Belt
Preferably from Mechanical / Automobile/ EMS / Electronics / ...
1 Opening(s)
7.0 Year(s) To 15.0 Year(s)
0.00 LPA TO 30.00 LPA
Position: Maintenance Manager
Experience: 7+ years
Notice: Immediate to 30 days
Location: Nairobi, Kenya (Onsite)
MAIN PURPOSE OF THIS POSITION
Ensuring availability of the appropriate engineering resources to enable safe and efficient plant operations for design and improvement of plant operations.
KEY DELIVERABLES FOR THIS POSITION
R: - Deliver & maintain EHS and regulatory standards
Q: - ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
Job Title : - Metallurgical Engineer
Department : - Heat Treatment
Qualification required: - Diploma/B.E. in Metallurgy
Experience required: - Min 2 years
Budgeted CTC: - No bar
Job Description
He must have knowledge of raw material and their chemical composition, hardness, microstructure, physical properties.
He must have knowledge of Heat Treatment ...
1 Opening(s)
12.0 Year(s) To 13.0 Year(s)
4.00 LPA TO 5.00 LPA
Job description
Roles and Responsibilities
• Strong Product & Process knowledge in Low Pressure Die Casting (LPDC) Part proving, Production Planning and Control, Troubleshooting, Defect analysis and Problem solving• Machine installations, Mould trials & Mould proving• Co-ordinate the entire product development cycle and finalize specifications• Verify chemistry of the metal, Metal tapping ...
1 Opening(s)
4.0 Year(s) To 7.0 Year(s)
4.50 LPA TO 5.50 LPA
Expertise in designing & implementing Best HR Practices, Recruitment, Training & Development, Performance Management.
Representative of Organizational development Interventions, Employee Involvement & Engagement activities & Personnel Policies.
Recruitments
Training & induction Legal Compliances
Performance Management System - PMS
Pay roll Management
Employee Engagement
5’S & Kaizen
Audits Like:- EMS & OHSAS,TS, HR Audits etc.
Administration
Policy Making
Travel Management
MIS
Legal Compliances Factory ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 2.40 LPA
Hiring for Tool Holder Machine Shop Manufacturing Industry
Position: Quality Engineer
Education: Diploma / BE Mechanical
Experience: 2 to 3 Years in the Machine shop, Parts Inspection
Salary: up to 20,000/- PM
Job Responsibilities : -
ISO Documentation (ISO 9001:2015 & ISO14001:2015) + EMSKnowledge of Tool Holder & ColletSAPMS OfficeInspection of partsKnowledge of SPC, MSA, PPAP, FMEA
Job location: Waluj MIDC, Aurangabad
If you are Interested ...