1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 4.00 LPA
Location :- Bhosari
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to ...
1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
9.00 LPA TO 10.00 LPA
Location :- Chakan
Should have sound knowledge in any one of above mentioned manufacturing processes
Good CAD Skills Conversant with PDM Hands-on with Creo
Awareness of IATF 16949:2016 specs and development of products accordingly
GD&T Knowledge Mandatory
Conceptualization to Industrialization - Complete Product Life Cycle development experience for at least two products
Tooling (Press fit, Injection ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Location :- Bhosari
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Working experience in Precision Plastic Insert Injection Mold elements/ Precision Jigs and Fixtures manufacturing using VMC machines
Knowledge of reading and interpreting CAD documents, prints (3D/2D), GD&T
Workpiece inspection knowledge & quality requirements.
Hard part machining
Effective Usage of measuring equipment for work piece quality control checks.
hand feed tools as required Inspects parts during ...
3 Opening(s)
4.0 Year(s) To 8.0 Year(s)
3.60 LPA TO 6.00 LPA
Responsibilities
As a maintenance engineer, you'll need to:
design maintenance strategies, procedures and methods
carry out routine maintenance work and respond to equipment faults
diagnose breakdown problems
fit new parts and make sure equipment is working correctly
carry out quality inspections on jobs
liaise with client departments, customers and other engineering and production colleagues
arrange specialist procurement of ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Location :- Ambad Nashik
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports ...
3 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Location :- Chinchwad
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to next stage.
Comply ...
2 Opening(s)
5.0 Year(s) To 10.0 Year(s)
1.00 LPA TO 6.00 LPA
Designation: Electrician (light Pump)
Job Location: Saudi Arabia
Experience: 5+ Years
Job Description
1.
GENERAL DESCRIPTION OF THE JOB:
To ensure that job responsibilities shall be performed in adherence to Naqua governing policies, implemented standards (local and international) including all Shrimp Business Unit department Responsible entail taking steps to assemble, repair, and maintain electric motors.Typically work on a ...
2 Opening(s)
7.0 Year(s) To 10.0 Year(s)
7.00 LPA TO 8.00 LPA
Developed new moulds for plastic parts using NX software .Created detailed 2D drawings of moulds assembly using CAD software.Design review of mould, tools & identifying critical characteristics of PartandMould.Used Microsoft Word, Excel, and PowerPoint to providedocumentation.Worked with our internal tool builders as well as outside vendors to assuredesigns are communicated ...