1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 6.00 LPA
Qualification: Diploma or BE in Mechanical, Production, PlasticExperience: 4 to 10 yrs exp in supplier quality & development
Job profile:Process audit at supplier to improve supplier process capability - (PFMEA, SPC, MSA, Gauge planning, process planning imrovement)Product audit at supplier to improve product quality ( Layout inspection , supplier end lot inspection)SPR ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
1.68 LPA TO 1.92 LPA
Position: Quality Engineer
About the responsibilities of the position: The main activity of the Quality that he is responsible for all the Quality issues of all the products.
Educational Qualifications: Bachelor of Engineering in the stream of Mechanical / Production. Or Diploma in Engineering in the stream of Mechanical
Skills Set required:
Responsible for all the ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Maintenance Shift In charge
Education: DEE / BE Electrical
Experience: Min 6 Years in Rolling Mill / Steel Industry
Job Profile: Working in a general shift, make daily job planning, manpower planning as per rolling section.
Responsible for doing pm-1(preventive maintenance) jobs .shift schedule and daily checklist follow-up,
Responsible for Electrical & Automation Maintenance of 600-meter long HAPL Line consist of Entry section, RCM Welder,6-HI Cold / Hot Rolling Mill, Furnace, Scale Breaker, Shot- Blaster, Pickling, Entry-Mill & Exit Loppers & exit Section.
Responsible for handling all maintenance related activities of ABB PLC's,AC Drives,AC Motors and DCS 800xA System and LT and HT switch Gears used in the plant
Knowledge in logic solving in control panels & various interlocking schemes required for automation and analyzing all drawings related to automation & control systems.
Instrumental in coordinating with various internal departments and contractor personnel for safe execution of shutdowns and ensuring implementation of routine/preventive/breakdown maintenance schedules of the system to increase machine uptime, equipment reliability thereby.
Responsible for maintaining 5S activity & safety measures regularly
To co-ordinate with the Electrical contractor for Execution, Erection, and Commissioning
Basic Knowledge of Sheet CENTER GUIDE and STEERING UNIT, EDGE System provided by EMG.
Knowledge of hardware Communication between Drives, PLC and HMI’s through Fiber Optic and Profibus.
Knowledge of Gauge Measurement system provided by IMS used at 6 HI in Line Mill.
Responsible for keeping a record of the daily power consumption, daily delay report, spare parts list of the plant.
Basic Knowledge about Control-Logix / Compact-Logix systems of Allen-Bradley PLC (Rockwell Automation).
Identifying NetLinx networks for use in a Logix5000 System used for in-line Welder.
Successfully accomplished Erection, testing, Commissioning of ARP System(Acid Recovery Process
To maintain records, logbook for the job carried out.
Organize safety meetings & give on the Job training to my subordinates
To ensure good housekeeping in the area and the shop floor.
Take participate in IMS internal audit and prepare all supporting document
To maintain a record of bypass of trip & interlock as per the procedures.
Working on SAP (Plant Maintenance Module).
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
For more details call on 7249840333 / 9765567506
Send CV on career@paradiseplacement.co.in
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Designation: Quality inspector (Male or Female)
Education : DME/ITI
Experience : 1-2 years
Job Skill required:
1 Well knowledge about assembly part defects & Child part inspection
2 QMS Documentation Knowledge -IPO, Control Plan, QA/QM Matrix, FPA, SIR, Dimensional inspection, RM report preparation
3 Check ...
2 Opening(s)
2.0 Year(s) To 6.0 Year(s)
1.80 LPA TO 3.00 LPA
Good Knowledge of CNC Programming / Operating
Good Knowledge of Jig Fixture
Operation of all Conventional, NC, and CNC machines in tool room.
Tool Jigs & Fixture, etc.
Manufacturing processes & process planning.
CNC programming of HAAS, SIEMENS & FANUC controls.
Hands on experience of CNC Prog. & machining (HAAS, FANUC, SIEMENS, ROBOFILL, ELECTRONICA, CHARMILLS TECH., AGIE-CHARMILLS SRP EDM CONTROLLS).
Process sides maintain all parameters on daily basis, implementation of GAUGE R&R system, PDCA & FMEA activity.
Implementation of KAIZEN.
Total manufacturing process i.e. CAM software, CNC operation, imaging, plating etching, masking, HAL or solder process, BBT and FQC.
Conduct trials for new supplier /new Machines and process validationof this product /Machine.
Check and maintain all documentation on daily basis.
Daily rejection, rework analysis and production analysis by maintaining records of production, rework, rejection, downtime and absenteeism, prepare shift production summary.
Job Location: Waluj MIDC, Aurangabad
for More details call on 7249840333
1 Opening(s)
3.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 3.00 LPA
1 Responsible for all the Quality issues of all the products1.To ensure zero % rejection at the customer's end2.Responsible for the Developments of new techniques and methods of Q A3.Responsible for the gauge calibration4.Responsible for the development of a good Quality team in all area5.Responsible for the reduction of in-process ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.44 LPA TO 1.80 LPA
Responsible for all the Quality issues of all the products
To ensure zero % rejection at the customer's end
Responsible for the Developments of new techniques and methods of Q A
Responsible for the gauge calibration
Responsible for the development of a good Quality team in all area
Responsible for the reduction of in-process rejection
Responsible ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.00 LPA
1 Responsible for all the Quality issues of all the products 1.To ensure zero % rejection at the customer's end 2.Responsible for the Developments of new techniques and methods of Q A 3.Responsible for the gauge calibration 4.Responsible for the development of a good Quality team in all area 5.Responsible ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.00 LPA
QA-Sr. Engineer (3 requirements)
Working as a MR for QMS (TS 16949:2009).
Implementation of customer specific requirements& QMS in all functions of the plant.
Conducting Internal Audits & Implement all actions as per the improvement plan.
Analysis of Non conformance’s for Corrective/Preventive actions.
Daily & Monthly rejection analysis.
Customer complaint handling.
Analysis & Actions for In-house Rejection, Rework, Scrap, ...
1 Opening(s)
12.0 Year(s) To 20.0 Year(s)
8.00 LPA TO 10.00 LPA
Dear Sir,
Hiring for Quality Head (QA) in Aurangabad Company Profile : Satin Finish Electroplating, Satin Finish Handle Bar, Sari Guard & Leg Guard, Trailing Arm Assembly, Auto Components, Manufacturer, Aurangabad, India The total sales revenue of the company for the financial year ending on March 2015 is INR 1100 million ...