1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
4.80 LPA TO 5.40 LPA
Key Responsibilities:
Design and develop components and assemblies drawings.
Prepare 2D drawings, 3D models, flat patterns, and BOMs.
Coordinate with production team for manufacturability and process improvements.
Knowledge of Machine shop, CNC turning, VMC, HMC, VTL and final Machine Assembly processes.
Optimize designs for production efficiency and material utilization.
Handle design modifications as per customer and production requirements.
Support prototype development ...
1 Opening(s)
0 To 5.0 Year(s)
Not Disclosed by Recruiter
Key Responsibilities
Machine Setup: Calibrate machines, load necessary tools, and secure raw materials (metal, plastic, etc.) for production.
Programming: Load pre-written programs or input parameters (speed, cutting depth, and feed rates) into the CNC controller.
Trial Runs: Perform initial test cuts to verify alignment and adjust machine settings prior to mass production.
Quality Control: ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 6.00 LPA
Job Opening: Mechanical Engineer – Printing & Packaging Machines
Location: Ahmedabad
English- Fluent/good
Key Responsibilities* Mechanical design and development of Label & Flexible Packaging Printing Machines.* Create 3D models, assembly drawings, and BOMs using SolidWorks.* Coordinate fabrication, assembly, installation, and machine commissioning.* Troubleshoot mechanical issues and support machine performance improvements.* Work closely with ...
1 Opening(s)
2.0 Year(s) To 8.0 Year(s)
2.50 LPA TO 4.80 LPA
Key Responsibilities
Machine Setup & Operation: Safely prepare and operate VMC machines according to technical drawings and work instructions.
Tooling: Select, install, and adjust cutting tools, fixtures, and workpieces to match job specifications.
Programming & Offsets: Understand and modify G-code/M-code programs. Perform tool wear offsets and adjust speeds/feeds for optimal surface finish.
Quality Control: ...
1 Opening(s)
2.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 7.00 LPA
Job Title: SAW Wielding Operator
Experience- 2+ years
Location: Oman
Salary- 250-300 OMR
Job Responsibilities-
Parameter Configuration: Set up and adjust machine parameters according to the Welding Procedure Specification(WPS), including welding current, voltage, wire feed speed, and travel speed.
Flux Management: Ensure the proper flux type is used and that the flux hopper is full and properly positioned ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
As an Automation Engineer will be responsible to develop program from scratch and must be responsible for Installation, testing and commissioning for the same.
Roles and Responsibilities: -Design, develop, and troubleshoot PLC programs using (Allen Bradley, Siemens, Schneider, and Rockwell, etc) platforms.Work extensively on motion control systems, including servo drives, multi-axis ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.00 LPA
Job Responsibilities:
Perform MIG welding on steel, stainless steel, and other metal components.
Read and interpret engineering drawings, blueprints, and welding symbols.
Set up and operate welding machines, grinders, and cutting tools.
Measure, cut, align, and assemble metal parts as per specifications.
Inspect welded surfaces and structures to identify defects or weak joints.
Maintain welding equipment ...
1 Opening(s)
5.0 Year(s) To 20.0 Year(s)
Not Disclosed by Recruiter
Production Incharge – CNC & WIP Control
Industry: Poles & Towers Manufacturing
Location: Kingdom of Saudi Arabia (KSA) J
Job Responsibilities:
Handle RM (Raw Material) received reports and production planning.
Monitor CNC machine output and ensure daily production targets are achieved.
Supervise WIP (Work in Progress) control and follow-up till GI dispatch with proper production data.
Manage ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.00 LPA
Job Description
21.05.26
133823
HPS/2026/416
VMC Programmer
Male
1
2 to 3
ITI/DME
12 Hrs
Educational Qualification
ITI / Diploma in Mechanical Engineering (DME)
Experience Required
Minimum 2 to 3 years of experience as a VMC Programmer.
Job Responsibilities
Programming and operating VMC machines.
Reading and understanding engineering drawings.
Setting tools and preparing machine operations.
Monitoring machining processes and ensuring product quality.
Making necessary program corrections and machine adjustments.
Maintaining ...
1 Opening(s)
6.0 Year(s) To 12.0 Year(s)
50.00 LPA TO 60.00 LPA
We are looking for an experienced Sr. Machine Learning Engineer to lead the development of cutting-edge Generative AI applications and scalable AI platforms. This is a high-impact technical leadership role for professionals passionate about LLMs, NLP, deep learning, and production-grade AI systems.
📍 Location: Open💼 Experience: 5+ Years🛠️ Tech Stack: Python, ...