1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 3.50 LPA
We are looking for candidates with more than 4+ years of experience in Automotive industry with Plastic background having good knowledge of Systems and Quality ProceduresHe should be well versed with ISO Standards and alreadyfaced ISO Audits.Work location: Vasai East in Mumbai
Qualification: Diploma or BE in Mechanical, Production or PlasticExperience: ...
3 Opening(s)
5.6 Year(s) To 7.5 Year(s)
15.00 LPA TO 25.00 LPA
Role : Deployment Specialist Role Description : Assist the Deployment Lead in all deployment-related tasks including work planing, scheduling, budgetting, metrics, training, pilots and resources. ...
2 Opening(s)
0 To 3.0 Year(s)
0.00 LPA TO 1.95 LPA
We have opening for the position of WebChat Process for a leading company in NaviMumbai.
Please find the details below:
Job Location: CBD Belapur
Salary : 15k
Specification / Skills /:-
Good Written Communication.
Should be able to handle WebChat.
Ready for Wotking from Home.
Ready for Evening/ night shift.
Job Timing : 6:00PM – 2:00AM
If you are ...
4 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.20 LPA TO 3.00 LPA
Hiring for Quality Control Engineer in MNC (Medical Device)
Post: Quality Engineer (Female)
Education: BE Mechanical
Experience: Min 2 Years Experience
Job Description:
Total Quality Management
Support plants to drive “ZERO DEFECTS PROGRAM” along with a reduction in COPQ.
To handle customer complaints and satisfaction.
Handling in-process inspection, final inspection, receiving inspection
Review, analyze & controlled and non-conforming product and ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.00 LPA
Qualification: Diploma or BE in Mechanical or ProductionExperience: 2 to 5 yrs exp from Foundry industry.Work location: Chakan in Pune
Job Requirement:Candidate should have experience in “Visual Inspection & Dimensional Inspection” in foundry plant.Should have worked as an Internal Auditor.Should have thorough foundry process knowledge.Should have experience of handling customer’s issues and review ...
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.60 LPA
Hiring for Quality Engineer Powder coatingReporting to: QA Head Educational Qualifications: Diploma/Degree (in Paint technology, Chemical , B. Sc. Or M.Sc. )Desired Experience: Up to 2 to 5 years experience in same pattern industry (Powder coating)Salary: Up to 3.60 Lac(s)
JOB PROFILE:
Pre-Treatment process knowledge
Powder coating process knowledge
Timely verification of pre-treatment tank point age & Ph level ...
1 Opening(s)
7.0 Year(s) To 12.0 Year(s)
5.00 LPA TO 7.00 LPA
Handling of continues carburizing Furnaces(Made By Dongwo surface Tech Ind).
Handle all Heat Treatment Shop Floor Including Shot Blasting Machine, Shot Peening Machine, Thread Softening Machine, MPI Machine, Straightening Machine.
Checking of samples (Case Depth, core hardness, Micro Structure)
Checking of inward samples (surface hardness, microstructure, grain structure)
Handle Endo Gas Generator
Handling of wet Lab(Cutting, Mounting, Polishing.)
Operating of Brinell Hardness Tester, Rockwell Hardness Tester, Vickers Hardness Tester, Microscope Millipore Checking, Spectro Test.
Fill up all JH Sheets, DWM data OEE Sheets. Utility Consumption aw Material Inspection for crack, Hardness, Micro-structure, Grain size Measurement, Decarburization level and Inclusion level measurement and defects if any with traceable documents.
Inspection of heat treated parts for surface hardness, Effective case depth, microstructure analysis, decarburization level (if any) and defects if any with traceable documents.
Research & Development work like the selection of an appropriate heat treatment cycle without sacrificing customer requirements.
Monitoring the heat treatment process continuously and taking the remedial action if any deviations are found.
Heat treatment vendor development, Vendor process monitoring, and product inspection.
Maintaining the Metallurgical equipment that is as follows
Metallurgical Microscope ( Leica ) – DM 2800
Micro Vickers Hardness Tester ( Future tech) – FM 300
Vickers hardness tester ( Future tech) – FV 800
Digital Rockwell Hardness Tester ( Future tech) – FR – 3e
Analog Rockwell Hardness Tester.
Abrasive cutting machine ( Chennai metco )
Molding machine ( Chennai Metco )
Double Disc Polishing Machine ( Chennai Metco )
Belt grinding machine ( Chennai Metco)
Brinell Hardness Tester
Muffle Furnace (Techno).
Carrying out of furnace and process validation with proper traceable documents and calibrating the metallurgical instruments with appropriate service parties as per schedule.
Job Location: Waluj MIDC, Aurangabad
Send CV on Career@paradiseplacement.co.in
for more details call on 9765567506 / 7249840333
2 Opening(s)
2.0 Year(s) To 4.0 Year(s)
2.40 LPA TO 3.00 LPA
Post: TPM Coordinator
Experience: Min 2 years in TPM
Job Profile:
Coordinating the entire TPM activity & Internal Audit activities and reporting to Plant Head (GM).
Preparation of Pillar wise Presentation.
Actively participate in productivity improvement by reducing losses & through Continual Improvements.
Planning & execution of TPM review Meetings & MRM.
Work as Coordinator for Engineering Lean Cluster Activity.
Coordinating for the project in the lean cluster such as FLOW, SMED, 5S, Autonomous Maintenance, space reduction, Single page Inventory & Six Sigma for PPM reduction.
Preparation of Case study & Presentation in MASSIA with corresponding companies in the cluster.
Work as TPM Coordinator for Godrej Supplier Activity
Conducting TPM activity at supplier end for supplier development.
Handling the monthly training activities as per Training need assessment.
Handling the customer audits (Supplier evolution audits).
Handling the Suppliers audits, vendor audits & internal audits independently for ISO 9001:2015.
Handling Green Co-Cluster Activity.
Handling Kaizen & Poke-Yoke Competition.
Actively participates in VSM, Lead Time reduction, OEE, MTTR & MTBF data collection Analysis.
Handling ISO 2015 certification Audits for Plant.
Monitoring MRM Data & Presentation in vendor meet
Handles TPM & Quality Documents as per Customer Requirement.Handles Customer ComplaintsPreparing Presentations of Rejection Analysis and presents it to the management.Conducting IPO & Process Audits in order to continually refine the process Structure.Preparation of IPO & ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.44 LPA TO 2.40 LPA
Hiring for "Quality Management System (QMS) Engineer"
Job Type : On Roll
Education: BE- Electronics & Telecommunication / Electrical
Experience: 1-3 years in Certification-TS
Job Profile:
Handles TPM , TS & Quality Documents as per Customer Requirement .
Handles Customer Complaints
Preparing Presentations of Rejection Analysis and presents it to the management.
Conducting IPO & Process Audits in order to continually ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 3.80 LPA
Post: Heat Treatment Engineer / Assistant Manager
Experience : 3 to 6 Years
Salary: 4 LPA
JOB RESPONSIBILITIES:-
Handling of continues carburizing Furnaces(Made By Dongwo surface Tech Ind).
Handle all Heat Treatment Shop Floor Including Shot Blasting Machine, Shot Peening Machine, Thread Softening Machine, MPI Machine, Straightening Machine.
Checking of samples (Case Depth, core hardness, Micro Structure)
Checking of inward samples (surface hardness, microstructure, grain structure)
Handle Endo Gas Generator
Handling of wet Lab(Cutting, Mounting, Polishing.)
Opearting of Brinell Hardness Tester, Rockwell Hardness Tester, Vickers Hardness Tester, Microscope Millipore Checking, Spectro Test.
Fill up all JH Sheets, DWM data OEE Sheets. Utility Consumption aw Material Inspection for crack, Hardness, Micro-structure, Grain size Measurement, Decarburization level and Inclusion level measurement and defects if any with traceable documents.
Inspection of heat treated parts for surface hardness, Effective case depth, microstructure analysis, decarburization level (if any) and defects if any with traceable documents.
Research & Development work like the selection of an appropriate heat treatment cycle without sacrificing customer requirements.
Monitoring the heat treatment process continuously and taking the remedial action if any deviations are found.
Heat treatment vendor development, Vendor process monitoring, and product inspection.
Maintaining the Metallurgical equipment that is as follows
Metallurgical Microscope ( Leica ) – DM 2800
Micro Vickers Hardness Tester ( Future tech) – FM 300
Vickers hardness tester ( Future tech) – FV 800
Digital Rockwell Hardness Tester ( Future tech) – FR – 3e
Analog Rockwell Hardness Tester.
Abrasive cutting machine ( Chennai metco )
Molding machine ( Chennai Metco )
Double Disc Polishing Machine ( Chennai Metco )
Belt grinding machine ( Chennai Metco)
Brinell Hardness Tester
Muffle Furnace (Techno).
Carrying out of furnace and process validation with proper traceable documents and calibrating the metallurgical instruments with appropriate service parties as per schedule.
Job Location: Chikalthana MIDC, Aurangabad
Send CV on Career@paradiseplacement.co.in
for more details call on 7249840333