1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
15.00 LPA TO 18.00 LPA
Discipline / DepartmentPositionExperience requiredCTCQualification
: HVAC: Sr. Project Manager / AGM: Minimum 15 years: depending upon candidate’s knowledge and experience: B. Tech / M. Tech (1st preference to M. Tech) in Mechanical Engineeringand or special course in HVAC
Job Description:-• Calculation of heat - loads of the buildings to be air conditioned ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 3.00 LPA
Job Description:
HVAC engineers are responsible for designing, installing and maintaining heating, ventilation and air conditioning systems. They work with a wide range of clients, from individual homeowners to large corporations.
HVAC engineers must be well-versed in the principles of HVAC design and construction. They also need to know how these systems ...
1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
Qualification: BE Mechanical, DME, BSC with Certificate course in Auto CAD (Mechanical Draftsman)Work experience: 4 to 10 Yrs designing exp of HVAC projectsIndustry: Engineering / HVACGender: Male/Female, Age: 25 to 40 yrs, Salary: Negotiable for right candidate
Job Description / Responsibilities:HVAC Design, Drawing for Various Projects .Preparing Techno-Commercial proposals / TendersPreparation of Auto-CAD ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
Not Disclosed by Recruiter
We have an opening for the HVAC Manager for a reputed Company in the Healthcare Industry for Thane Location.
Job Description:
Experience in designing of Pharmaceutical projects having knowledge of HVAC and Clean Room
HVAC Room condition sheet preparation along with classification, zoning & pressure differential layout.
Preparation of quantity sheet for cleanroom partition & doors.
Support to ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
4.00 LPA TO 6.00 LPA
Experience : 3-5 yeas (Chilled water system design in must)
Have experience in HVAC design e.g. chiller, VRV, AHU, Heat loading and ducting
Key Skills: Heat load , pump head calculation , AutoCAD drawing preparation , BOM working , indenting , TDS preparation , coordination with consultant and PMC for approval etc.
Lead ...
1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
Not Disclosed by Recruiter
Hi,
We have the opening for HVAC Design Manager with one of our esteemed Client.
Please find below Job Description:
Experience required - 15+ yrs
Location- Bangalore
Middle East Experience is must.
Must have experience in Infrastructure Projects and High Rise Rise building projects.
Have experience in Revit and BIM Skills.
Proactive and member of ASHARE or IMechE ...
1 Opening(s)
10.0 Year(s) To 18.0 Year(s)
15.00 LPA TO 20.00 LPA
Job Description:- • Calculation of heat - loads of the buildings to be air conditioned with psychometric representation. • Calculation of air quantities, ducts sizes and duct routing. • System design and selection of equipment’s. • Selection of equipment locations • Preparation of data sheets. • Preparation of URS + ...
1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
10.00 LPA TO 15.00 LPA
Job Description:- • Calculation of heat - loads of the buildings to be air conditioned with psychometric representation. • Calculation of air quantities, ducts sizes and duct routing. • System design and selection of equipment’s. • Selection of equipment locations • Preparation of data sheets. • Preparation of URS + ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
1.20 LPA TO 4.80 LPA
Works As HVAC Project Supervisor
Supervision of installation, Testing and commissioning of all types of HVAC Equipment like VRV ACS,NON VRV ACS, DUCTABLE UNITS, FRESH AIR FAN, EXHUAST FAN, AHU UNITS,TFA/HRW UNIT INSTALLATION ON SITE.
Monitoring and supervising of DUCTING WORK INSTALLATION AS PER DRAWING and CUSTOMER REQUIREMENT.
installation of all type of ...
1 Opening(s)
3.0 Year(s) To 8.0 Year(s)
4.00 LPA TO 5.00 LPA
Qualification: BE (Mech) with 3 to 8 years of experience in HVAC industry with handson on the Heat exchanger calculations.Job description / Design & Proposal Engineer :-1. Heating / Cooling / Psychometric calculations2. Preparing Techno-Commercial proposals / Tenders3. Preparation of Auto-CAD Drawings4. Extend any technical support required during order execution5. Visit site ...