1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Post: QA Engineer In Process/ Inward
Education: BE/ Dip (Mech)
Experience: 1-4 years
Keywords: Fabrication department experience candidates should be preferred
Job Profile
Conducting Process Audit, Product Audit, Supplier Audit as per plan.
Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis.
Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies.
Monitoring In-Ward & Final Inspection.
1st piece in process inspection report & taking C.A. if any.
In handling customer complaints and their solutions.
To maintaining quality related document calibration report, Inspection report and etc.
To take follow up on supplier corrective action reports.
Preparing the control plan of In-Ward, Final& In-Process component.
Preparing PPAP, PFMEA for new development components
Do SPC to check process capability.
Vendor Audit & internal audit and online production inspection.
Handling Quality team for in-process inspection.
Prepare Monthly data for MRM. ï‚· Involvement in new machine trail & commissioning.
Making SIR ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.20 LPA
Job Description:
Post: Sr. Engineer - QA
Education: BE/ Dip (Mech)
Keywords: Press shop department experience candidates should be preferred
Job Profile
HAndle Customercomplaints and knowledge about IPO, PPAP, SPC, and ISO Audit.
Conducting Process Audit, Product Audit, Supplier Audit as per plan.
Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis.
Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies.
Monitoring In-Ward & Final Inspection.
1st piece in process inspection report & taking C.A. if any.
In handling customer complaints and their solutions.
To maintaining quality related document calibration report, Inspection report and etc.
To take follow up on supplier corrective action reports.
Preparing the control plan of In-Ward, Final& In-Process component.
Preparing PPAP, PFMEA for new development components
Do SPC to check process capability.
Vendor Audit & internal audit and online production inspection.
Handling Quality team for in-process inspection.
Prepare Monthly data for MRM. ï‚· ...
2 Opening(s)
5.0 Year(s) To 15.0 Year(s)
4.20 LPA TO 7.20 LPA
Complete quality documentation preparation and maintenance - e.g. QAP etc.
Incoming inspection of all purchased materials, followed by tracking punch points to closures.
Quality Certification Incharge - Responsible for the overall success and maintenance of the Quality certifications that the company holds.
Inspection (in process or final) of components at Vendor works.
In-process inspection ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 4.00 LPA
Location :- Bhosari
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to ...
3 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Location :- Chinchwad
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 4.50 LPA
RESPONSIBLE FOR REVALIDATION SYSTEM AS PER CUSTOMER REQUIREMENT FOR FINAL AND CHILD PART
RESPONSIBLE FOR PROCESS INSPECTION AND FLOW OF PARTS IN EVERY PROCESS WISE
ALSO DO VENDOR AUDIT AS PER CONTROL PLAN
RESPONSIBILITY OF PART LAYOUT INSPECTION ON CO-ORDINATE MEASURING MACHINE (CMM).
CALIBRATION AND MAINTAINANCE OF INSTRUMENTS (PROFILE PROJECTOR, VERNIER ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
CMM(Co-ordinate Measuring Mchine)
Responsible for monitoring in-process inspection and final inspection.
Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc.
Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.50 LPA TO 4.00 LPA
CMM(Co-ordinate Measuring Mchine)
Responsible for monitoring in-process inspection and final inspection.
Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc.
Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
4 Opening(s)
3.0 Year(s) To 5.0 Year(s)
4.20 LPA TO 5.40 LPA
A Quality Inspector ensures products meet exact safety and company standards by testing materials, measuring dimensions against blueprints, and documenting defects. They prevent faulty goods from reaching customers and help resolve production line issues.
Key Responsibilities
Material Inspection: Approve or reject incoming raw materials against defined quality criteria and record supplier performance.
In-Process ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
7.20 LPA TO 8.40 LPA
A) Responsibility1) Incoming Raw Material,Incoming Components,Vendor supplied machined parts and Heat-Treated parts,Establishing required quality at vendors’ works.2) In-house –machined componentsHeat Treated componentsWelded sub assembliesFinal Assembly of the productsTesting of Finished GoodsPackaging3) Should be able to manage the team of 5 engineers, which includes, assigning jobresponsibilities – work station- wise and ...