3 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Location :- Chinchwad
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
Follow the daily production activity Plan defined by supervisor.
Verify the component by 100% inspection as per drawing.
Select the required HMC/VMC tools as per component and programing.
Record the inspection results in respective format
Update the status of production on ERP / Work order.
Move the material along with all reports to next stage.
Comply ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
5.00 LPA TO 7.00 LPA
Description of the activities:
Service Engineer – Digital Printing for fabric direct printing machine (Delhi region)
Installation, Commissioning & Servicing of Digital Printing Machines.
Duties, powers and responsibilities:
· Installation, Commissioning & Service support of Digital Printing Machines & Rotary printing machines.
· Trouble Shooting & Overhauling.
· Sales promotion of Spares.
· Annual Maintenance Contract.
· Customer ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 4.00 LPA
knowledge about Selection of tools according to operations
Knowledge about Operating and ProgrammingCNC &VMC machines.
Knowledge aboutJob settingCNC &VMC machines.
CNC & VMC programming & of Fanuc and Mitsubishi controls etc.
2D Programming on VMC.
All Machine Shop Dept. Problem-solving
Programming of new parts
Managed and supervised CNC & VMC Operators.
Programmed and set up machines to produce ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 5.00 LPA
knowledge about Selection of tools according to operations
Knowledge about Operating and ProgrammingCNC &VMC machines.
Knowledge aboutJob settingCNC &VMC machines.
CNC & VMC programming & of Fanuc and Mitsubishi controls etc.
2D Programming on VMC.
All Machine Shop Dept. Problem-solving
Programming of new parts
Managed and supervised CNC & VMC Operators.
Programmed and set up machines to produce ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 6.00 LPA
Build and assemble machines or mechanical components according to requirements
Inspect machines, packing lines and run diagnostic tests to discover functionality issues
Conduct repairs for maximum reliability
Troubleshoot reported problems and resolve them in a timely manner
Perform maintenance on machinery, equipment and systems
Clean and apply lubricants to machinery components
Replenish fluids and components of ...
1 Opening(s)
6.0 Year(s) To 7.0 Year(s)
5.00 LPA TO 6.00 LPA
To Plan the Preventive Maintenance Schedule for all machines of the plant and set the check points of machines during the preventive maintenance as per the machine manual and as per working environment.
Installation of Conveyor lines (Realty Engineering) for SDA, Water Purifiers, and Iron.
Routine Maintenance of Conveyor lines i.e. motor ...
1 Opening(s)
0.6 Year(s) To 6.0 Year(s)
1.00 LPA TO 3.00 LPA
Candidates should have installation or maintenance experience with textile spinning machines.
Electrical Maintenance of spinning machines.
Travelling is mandatory.
Knowledge in Electrical Panel Maintenance.
Have to Sign 3.6 yrs of agreement with company.
Knowledge about Spinning Machines
Aggregate should be 60%.
Candidate should have good communication in English.
Qualification - B.E. /Diploma (Electrical / Electronics / ECE)
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
3.00 LPA TO 3.60 LPA
Job description
Urgent Requirement!!.
Operating and monitoring plastic injection molding machine
Setting up and adjusting machines, tools, and equipment
Following standard operating procedures and safety protocols
Troubleshooting and resolving machine malfunctions
Conducting regular maintenance and cleaning of machines
Inspecting and testing finished products for quality and adherence to specifications
Keeping accurate production records and reporting production data to ...
4 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 4.00 LPA
Experience: 3 To 10 Years. Experience in RMC Plant
Qualification: Diploma - Mechanical; B.Tech/B.E - Mechanical
Job Description:
Mechanical engineers design power-producing machines, such as electric generators, internal combustion engines, and steam and gas turbines, as well as power-using machines, such as refrigeration and air-conditioning systems. Mechanical engineers design other machines inside buildings, ...