40 Opening(s)
3.0 Year(s) To 4.0 Year(s)
2.04 LPA TO 2.80 LPA
Responsibilities
Reviewing the blueprints of various mechanical systems
Constructing and joining structural components
Examining and measuring components to ensure that they are of the correct size and quality
Using welding equipment and hand tools like ball-peen hammer, hack saw, and steel ruler while constructing structural components
Performing regular maintenance checks
Identifying system malfunctions and rectifying the ...
10 Opening(s)
3.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.40 LPA
Responsibilities
Reviewing the blueprints of various mechanical systems
Constructing and joining structural components
Examining and measuring components to ensure that they are of the correct size and quality
Using welding equipment and hand tools like ball-peen hammer, hack saw, and steel ruler while constructing structural components
Performing regular maintenance checks
Identifying system malfunctions and rectifying the ...
2 Opening(s)
0 To 1.0 Year(s)
1.00 LPA TO 1.20 LPA
Responsibilities
Reviewing the blueprints of various mechanical systems
Constructing and joining structural components
Examining and measuring components to ensure that they are of the correct size and quality
Using welding equipment and hand tools like ball-peen hammer, hack saw, and steel ruler while constructing structural components
Performing regular maintenance checks
Identifying system malfunctions and rectifying the ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 4.50 LPA
RESPONSIBLE FOR REVALIDATION SYSTEM AS PER CUSTOMER REQUIREMENT FOR FINAL AND CHILD PART
RESPONSIBLE FOR PROCESS INSPECTION AND FLOW OF PARTS IN EVERY PROCESS WISE
ALSO DO VENDOR AUDIT AS PER CONTROL PLAN
RESPONSIBILITY OF PART LAYOUT INSPECTION ON CO-ORDINATE MEASURING MACHINE (CMM).
CALIBRATION AND MAINTAINANCE OF INSTRUMENTS (PROFILE PROJECTOR, VERNIER ...
2 Opening(s)
4.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
Profile: Senior Engineer Press shop-Production
Industry: Automobile (Sheet Metal Components)
Location: Vithalapur,Gujarat
Roles & Responsibilities:
Handling production of Press shop and plan the schedule for production on daily basis
Responsible for Production documents verify on daily basis
Experience of Cost of Poor Quality
Responsible for Red Bin analysis and maintaining MIS
Experience throughout BIW sheet metal parts
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 2.40 LPA
Mechanical fitters fit and assemble metal parts to fabricate production machines and other equipment. They use a range of tools and engineering techniques to maintain and repair mechanical plant machinery and equipment to operational standards. They test and identify defective or worn mechanical components or equipment. Mechanical fitters also use ...
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 4.00 LPA
Location :- Sanswadi
A Grinder Operator is responsible for setting up and operating grinding machines to shape, sharpen and polish metal parts. They must be able to interpret technical drawings, set up the grinding machines and adjust the cutting tools to achieve desired results.
A Grinder Operator is responsible for operating grinding machines ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
Qualification: Diploma/ Btech in Mechanical, Production or AutomobileExperience: 10 to 15 years exp in Supply chain activities, SAP from Automoible industry.Industry: Automobile /ManufacturingLocation: Greater Noida
Job description: Must experience in Vendor development. Must have experience in Automobile Industry . Involved in supplier development for Machining, casting & Forgings. Exposure ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 3.00 LPA
Job description
17/08/24
HPS/2024/493
Grinder
Male
4
1 to 3
ITI Turner/ Grinder/10/12th
Roles and Responsibilities
Job description for grinder:
Min 3 Years’ experience in sand casting fettling
Should have knowledge of DP re-work
Should have experience in rough/finish grinding, gauge fit-up and chipping
Should have Good vision and physical strength
Age should be ...
1 Opening(s)
0 To 1.0 Year(s)
3.00 LPA TO 4.20 LPA
Job description
HPS/2024/265
VMC Supervisor
Male
1
0 to 1
ITI/DME
Dies & Moulds , Moulds , Eyelets
GIven the drawing of part candidate should do program and give output, Should be able to manage existing part setting and supervise shift, Control on quality and productivity improvement. Should perform process improvement.
work with computer numeric control (CNC) machines to ...