1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
CMM(Co-ordinate Measuring Mchine)
Responsible for monitoring in-process inspection and final inspection.
Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc.
Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
4.20 LPA TO 5.20 LPA
Job Summary:
The Quality Control Executive is responsible for inspecting, testing, and ensuring that all electrical switch and socket products meet defined quality standards and customer specifications. This role involves supervising in-process and final product checks, maintaining documentation, and ensuring compliance with BIS/ISI standards and internal quality protocols.
Key Responsibilities:
1. Quality Inspection ...
3 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 7.00 LPA
Job Summary:We are seeking a detail-oriented and experienced Quality Control (QC) Engineer –Machining & Structural Fabrication with 3–7 years of hands-on experience in qualityinspection for crane components or heavy structural fabrication. The role involves thoroughinspection of machined components and fabricated structures to ensure compliance withquality standards, design specifications, and customer ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.50 LPA
Position: Quality Engineer
Location: Vapi
Experience: 4 - 5 Years
Industries: Engineering
Responsibilities:
Ability to use Measuring instruments , Vernier, Micrometer, profile projector, hight gauge, etc.
Ability to inspection of parts & make PDI reports.
Basic knowledge of engineering process, Rolling, Annealing, extrusion , blanking etc.
Basic knowledge of ...
5 Opening(s)
1.0 Year(s) To 1.0 Year(s)
2.00 LPA TO 2.50 LPA
Location: Nighoje - Pune Experience: 1–3 years (preferred) Job Type: Full-Time | Shift-based
Job Summary:
We are seeking a detail-oriented and responsible Inspector to ensure that products and components meet quality standards and specifications. The role involves regular inspection, documentation, and reporting to maintain consistent production quality.
Key Responsibilities:
Conduct visual and dimensional inspection ...
5 Opening(s)
1.0 Year(s) To 1.0 Year(s)
2.00 LPA TO 2.50 LPA
Job Title: VMC Operator
Location: Nighoje-PuneExperience: 1–3 years (preferred)Job Type: Full-Time | Shift-based
Job Summary:
Key Responsibilities:
Set up and operate VMC machines as per production requirements
Read and interpret engineering drawings, blueprints, and job cards
Load and unload workpieces, tools, and fixtures
Perform offset setting, tool setting, and basic program editing
Conduct first piece inspection and in-process quality ...
5 Opening(s)
1.0 Year(s) To 1.0 Year(s)
2.00 LPA TO 2.50 LPA
Job Title: CNC Operator
Location: Nighoje-PuneExperience: 1–3 years (preferred)Job Type: Full-Time | Shift-based
Job Summary:
We are seeking a skilled and detail-oriented "CNC Operator" to set up and operate CNC machines for precision manufacturing. The candidate should have experience in reading technical drawings, handling tools, and ensuring quality production as per specifications.
Key Responsibilities:**
* ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
6.00 LPA TO 7.00 LPA
Job Title: Senior Quality Control Engineer – Inward Inspection Location: Ahmedabad CTC: ₹6 – ₹7 LPA Functional Area: Quality Assurance / Quality Control
Role Summary:
We are looking for a highly skilled Senior Quality Control Engineer with expertise in inward inspection of mechanical components and assemblies. The candidate should have solid experience ...
5 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 2.65 LPA
CNC- Job Professional Summary
Knowledge of CNC machines.
Knowledge of reading CNC machines drawings & reading CNC machines List count.
Knowledge of working / handling on all kinds of measurement like vernier caliper ,micrometer etc.
Education *ITI / Diploma * is Must.
Bus Canteen available
Overtime double
gross 20000/- to 22000/- per month
pf esic facilities available