1 Opening(s)
6.0 Year(s) To 7.0 Year(s)
5.00 LPA TO 6.00 LPA
To Plan the Preventive Maintenance Schedule for all machines of the plant and set the check points of machines during the preventive maintenance as per the machine manual and as per working environment.
Installation of Conveyor lines (Realty Engineering) for SDA, Water Purifiers, and Iron.
Routine Maintenance of Conveyor lines i.e. motor ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 5.00 LPA
I. Summary
Operate and monitor all equipment on the Boilers, Turbine/Generators, Steam System, and Water System. Perform all the duties in the control room.. Maintain proper water chemistry. Perform other duties as outlined by supervisor or lead person and relieve boiler operator and fuel pusher during break periods.
II. Duties and Responsibilities
To ...
1 Opening(s)
5.0 Year(s) To 9.0 Year(s)
4.00 LPA TO 10.00 LPA
Company Overview: Intellichemie is a young & growing first generation company involved in manufacturing ofAromatic Chemicals. The manufacturing facility is located in State-of-the-Art Industrial Complex– Dahej, GujaratThe Corporate office is located in Goregaon (East), Mumbai.Whether you are a recent graduate or a seasoned professional seeking a challenge,Intellichemie offers an opportunity to ...
4 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
onduct test runs with completed tools or dies to ensure that parts meet specifications make adjustments as necessaryCut, shape, and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rules, and hand toolsFile, grind, shim, and adjust different parts to properly fit them togetherFit and ...
1 Opening(s)
7.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
We are having an urgent opening for the position of Embedded Hardware Engineer for a reputed Company at the Mumbai(Mulund (West) location.
Embedded Hardware Engineer with experience in designing circuits for process instruments.
Candidate Eligibility:
Should be qualified Electronics Hardware Engineer with 3 to 6 years of R&D experience in Embedded System;
Experience in PCB designing using PADS / ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
0.00 LPA TO 15.00 LPA
Requirements
• A minimum of 8 years’ experience in conducting steam trap surveys, trap management services, steam & condensate accessories sales in Oil & Gas, Petro-chemical, Chemical, Fertilizer, Power Industry.
• Well familiar with the instruments used in the field of trap testing – Ultrasonic Leak Detector, IR Temperature Sensor.
• Skilled in ...
1 Opening(s)
0 To 3.0 Year(s)
1.00 LPA TO 3.00 LPA
onduct test runs with completed tools or dies to ensure that parts meet specifications make adjustments as necessaryCut, shape, and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rules, and hand toolsFile, grind, shim, and adjust different parts to properly fit them togetherFit and ...
4 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 4.00 LPA
Experience: 3 To 10 Years. Experience in RMC Plant
Qualification: Diploma - Mechanical; B.Tech/B.E - Mechanical
Job Description:
Mechanical engineers design power-producing machines, such as electric generators, internal combustion engines, and steam and gas turbines, as well as power-using machines, such as refrigeration and air-conditioning systems. Mechanical engineers design other machines inside buildings, ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Plant Electrical EngineerQualification: B.E. ElectricalExperience: At least 4 years in similar profileAge: Below 30 yearsGender: MaleLocation: Panoli (15 km from Ankleshwar)Salary: up to Rs. 30,000 CTC per monthSkills:1. Experience in industrial and/or commercial electrical systems.2. Understanding of PLC/SCADA systems.3. Understanding of computers and IT infrastructure.4. Advance knowledge of using ...
3 Opening(s)
4.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.00 LPA
onduct test runs with completed tools or dies to ensure that parts meet specifications make adjustments as necessaryCut, shape, and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rules, and hand toolsFile, grind, shim, and adjust different parts to properly fit them togetherFit and ...