1 Opening(s)
10.0 Year(s) To 20.0 Year(s)
15.00 LPA TO 18.00 LPA
Job Description:1. Analysis1.1 Raw material / packing material analysis at the time of incoming1.2 In process analysis time to time1.3 Finished product analysis and compare to require specification compliance2. Manage QC lab2.1 Method validation – Set test methods as pharmacopoeia and GMP requirement.2.2 Instrument calibration: Prepare calibration Schedule and calibration ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
10.00 LPA TO 20.00 LPA
Job Description:1. Analysis1.1 Raw material / packing material analysis at the time of incoming1.2 In process analysis time to time1.3 Finished product analysis and compare to require specification compliance2. Manage QC lab2.1 Method validation – Set test methods as pharmacopoeia and GMP requirement.2.2 Instrument calibration: Prepare calibration Schedule and calibration ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
Job Description:1. Analysis1.1 Raw material / packing material analysis at the time of incoming1.2 In process analysis time to time1.3 Finished product analysis and compare to require specification compliance2. Manage QC lab2.1 Method validation – Set test methods as pharmacopoeia and GMP requirement.2.2 Instrument calibration: Prepare calibration Schedule and calibration ...
2 Opening(s)
10.0 Year(s) To 20.0 Year(s)
1.00 LPA TO 40.00 LPA
Designation: QC Manager
Job Location: Dammam
Experience: 10+ Years
Job Description
1QC Manager (ARAMCO SAP Preferred).
University Degree Mechanical background Minimum 10 years Quality Control Inspection experience in oil and GAS.
· Overall Responsible for quality control activities on the project ensure implementation of quality control procedures, work instructions, inspection and testing plans, close coordination with Customer’s representative at site.
· He ...
4 Opening(s)
4.0 Year(s) To 7.0 Year(s)
3.00 LPA TO 9.00 LPA
Primary ResponsibilitiesOperational Excellence:? Prepare new processes in coordination with internal stakeholders on the new tie-ups on boarded/products developed as per regulatory framework? Assessment of current processes across departments for identification of gaps leading todevelopment of efficient products? Review current Standard Operating Processes (SOPs) assigned as per identified list andpublished to ...
3 Opening(s)
5.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 4.50 LPA
Additional - Soft communication skills,
analytical and problem solving ability,
project management skills,
acquainted with Production flow cycle,
production improvement techniques,
Quality control tests,
Reports writing, QMS
A Quality Manager, or Quality Assurance Manager, is in charge of supervising the production process to make sure that all products meet consistent standards. Their duties include developing and implementing quality ...
3 Opening(s)
3.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
personnel shall have been tested and certified by ASNT in the required NDT method (VT, PT, MT-RT, UT) and shall be required to fulfillthe full scope of a practicing Level III including, but not limited to:
method application, interpretation of results,
interpretation of codes and standards, preparation of procedures,
Training of Level I ...