5 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.04 LPA TO 4.20 LPA
- Fabrication of pipes.- Able to read Fabrication & Isometric Drawings.- Handling Shop Floor Activities - Marking, Cutting, Bending, Fit-up, Welding.- Manpower handling & Daily Production Reporting.
Production & Shop-Floor Execution:
Supervise daily fabrication, cutting, fitting, and assembly processes on the shop floor.
Ensure production targets are met on schedule without compromising safety ...
- Technical Terms: Heavy Fabrication
- Structural Steel
- Ibr (indian Boiler Regulations)
- Rdso Standards
- Composite Steel Girders
- Bow String Girders
- Pre-engineered Buildings (peb). Processes & Skills: Smaw/gmaw/gtaw Welding
- Blueprint Reading
- Cad Detailing
- Non-destructive Testing (ndt)
- Quality Assurance (qa/qc)
- Shop Floor Operations. Equipment/components: Superheater Coils
- Economiser Coils
- Headers
- Bed Coils
- Heat Exchangers
- Foot Over Bridges (fob).
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.50 LPA TO 5.50 LPA
Job Title: Safety In-charge (Ex-Army)
Department: Health, Safety & Environment (HSE)
Industry Type: Heavy Engineering / Iron & Steel / Railway Components Manufacturing
Location: Raipur / Chhattisgarh Industrial Area
Statutory & Regulatory Compliance: Ensure strict adherence to the Factories Act, State Factory Rules, and local safety directorate guidelines. Maintain all mandatory safety registers and ...
- Statutory & Regulatory Compliance: Ensure Strict Adherence To The Factories Act
- State Factory Rules
- And Local Safety Directorate Guidelines. Maintain All Mandatory Safety Registers And Documentation. Shop Floor Safety Oversight: Monitor Daily Operations Across Heavy Structural Fabrication Yards
- Welding Zones
- Material Handling
- And High-tonnage Crane/rigging Movements. Hazard Control & Risk Assessment: Conduct Regular Hazard Identification & Risk Assessment (hira)
- Job Safety Analysis (jsa)
- And Implement Preventive Engineering Controls. Training & Drills: Lead Daily/weekly Safety Briefing Sessions
- Toolbox Talks
- And Periodic Mock Drills (fire Fighting
- Structural Collapse
- Medical Emergency). Incident Investigation: Lead Root-cause Analysis (rca) For Any Near-misses
- Injuries
- Or Property Damage Incidents
- And Formulate Corrective And Preventive Action (capa) Plans. Ppe & Safety Audits: Enforce Strict Utilization Of Personal Protective Equipment (ppe) And Execute Internal Safety Audits To Identify And Rectify Workplace Hazards Proactively.
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
4.00 LPA TO 5.00 LPA
The Billing & Estimation Engineer will be responsible for preparing precise cost estimates, analyzing project specifications, managing quantities, and executing client/vendor billing. This role bridges the gap between project planning and financial execution, ensuring accuracy in project costing and timely bill settlements specifically for PEB and civil infrastructure projects.
Key Responsibilities
...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
12.00 LPA TO 14.00 LPA
We are seeking an experienced FEA Engineer with strong expertise in Abaqus, non-linear finite element analysis, and engineering calculations. The ideal candidate will be responsible for conducting detailed simulations, validating designs through analytical calculations, and supporting product development through advanced structural analysis.
Key Responsibilities
Perform linear and non-linear FEA simulations using Abaqus.
Conduct ...
1 Opening(s)
3.0 Year(s) To 8.0 Year(s)
Not Disclosed by Recruiter
We are looking for an experienced *Site Supervisor* for our *PEB (Pre-Engineered Building) Projects*.
*Key Responsibilities:*
* Supervise *PEB erection, sheeting and installation activities* at site.* Coordinate with the *erection contractor, site team and project management*.* Ensure work is carried out as per *approved drawings and project schedule*.* Monitor *manpower, productivity and ...
1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
Not Disclosed by Recruiter
Job Description – Design & Estimation Engineer
Location: Surat, Gujarat
Experience: 2–4 Years
Employment Type: Full-Time
About Us Established in 1993, Trishul Structure & Fabrication is a Surat-based company specializing in structural steel fabrication, industrial structures, roofing solutions, and engineering services. We are committed to delivering high-quality, cost-effective, and timely solutions across India.
Roles & ...
6 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.16 LPA TO 2.64 LPA
A Senior Welder position requires a skilled professional to perform complex metal joining, interpret blueprints, and guide junior team members. Key responsibilities include advanced fabrication, quality inspection, and strict safety compliance.
Key Responsibilities
Advanced Welding: Execute high-quality TIG, MIG, and Stick (SMAW) welding on steel, stainless steel, and aluminum in various positions.
Blueprint ...
- Senior Welder
- Sr. Welder
- Industrial Welder
- Mig Welder
- Tig Welder
- Arc Welder
- Smaw Welder
- Fabrication Welder
- Structural Welder
- Maintenance Welder
- Welding Technician
- Welding
- Arc Welding
- Mig Welding
- Tig Welding
- Gas Cutting
- Fabrication
- Structural Fabrication
- Blueprint Reading
- Engineering Drawings
- Metal Fabrication
- Steel Fabrication
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
15.00 LPA TO 18.00 LPA
A General Manager of Sales and Marketing leading a "Super Light Structure" division directs revenue, product launches, and brand positioning for lightweight manufacturing portfolios (e.g., UPVC, extruded aluminum, lightweight composites, or energy-efficient structures). The role focuses on B2B distribution and influencer networks.
Core Responsibilities
Strategic Go-to-Market (GTM): Design and execute launch plans ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.20 LPA TO 1.44 LPA
A Welder for the steel industry is responsible for assembling, repairing, and fabricating heavy-duty metal structures and components. They interpret complex blueprints, operate specialized welding machinery, and ensure all steel structures meet strict structural integrity and safety standards.
Core Responsibilities
Fabrication & Assembly: Cut, shape, and join heavy steel plates, beams, and ...