1 Opening(s)
5.0 Year(s) To 12.0 Year(s)
4.00 LPA TO 4.50 LPA
Qualification (Mandatory): DME with 8 Years/ BE with 5 Years
work location: Asian Paint (Shirwal)
Technical Skillset / JD: (Must have)1. Engineering Diploma with 7 to 8 years’ experience in operation & maintenance of utilities, EHS system at plant level, 2. Should be capable to address mechanical, electrical & instrumentation aspects independently ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.00 LPA
Operation of CHP Equipment:
Operate and control combined cycle gas turbine (CCGT), steam turbines, boilers, heat recovery steam generators (HRSG), and associated auxiliary equipment to generate electricity and thermal energy in accordance with production demands and grid requirements.
Monitor and adjust operating parameters such as fuel flow, steam pressure, turbine speed, and ...
3 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.00 LPA
Responsibilities:
Equipment Operation:
Operate and control power generation equipment, including boilers, steam turbines, generators, pumps, and auxiliary systems, to produce electricity according to demand and grid requirements.
Monitor equipment parameters, such as temperature, pressure, flow rates, and power output, using control systems and instrumentation to ensure efficient operation.
Start-up and Shutdown Procedures:
Execute start-up and ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.00 LPA
Requirement ENGINEER- MECHANICAL MAINTENANCE SPONGE IRON at Raipur
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of problems arising during routine maintenance work and implementing
systematic solution.
Preparation of preventive maintenance schedule & checklist.
Planning & controlling of spare part planning for preventive and breakdown maintenance.
Planning and ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.00 LPA
Requirement SHIFT INCHARGE/Sr ENGINEER- MECHANICAL MAINTENANCE SPONGE IRON (350*2TPD , 100*2TPD) for integrated steel and power at Raipur
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of problems arising during routine maintenance work and implementing
systematic solution.
Preparation of preventive maintenance schedule & checklist.
Planning & controlling ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
10.00 LPA TO 15.00 LPA
Requirement GENERAL MANAGER-MECHANICAL MAINTENANCE SPONGE IRON(350*2TPD 100*2TPD) for new generation integrated steel and power manufacturing based in Raipur (chhattisgarh) & Odisha location India. SID-4 Kilns (2 * 350TPD and 100*2tpd)Power- 80 MW/56 MW. (AFBC & WHRB boiler) Induction furnace 12ton-20 Tone (10 Panel) 25 MWT MT TMT Bar mill Ferro Alloys ...
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
4.80 LPA TO 5.30 LPA
Urgent requirement for Manager mechanical maintenance sponge iron dri for reputed steel plant at Bilaspur CG location.
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of problems arising during routine maintenance work and implementing
systematic solution.
Preparation of preventive maintenance schedule & checklist.
Planning & controlling of ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.50 LPA
Role Purpose: This position is responsible for Handling Maintenance General shift activities and to ensure properPreventive maintenance activities and monitoring the systems are carried out on time to ensure the smoothrunning of PlantsSKILLS:1. RCA, CAPA and 8D analysis2. RCM study3. Troubleshooting
KNOWLEDGE:1. Machine maintenance and breakdown maintenance2. PM planning and scheduling3. ...
2 Opening(s)
20.0 Year(s) To 25.0 Year(s)
10.00 LPA TO 12.00 LPA
Description:
Require immediately for a leading STEEL INDUSTRIES and a highly reputed Group for General manager MECHANICAL for Operation /Sponge Iron Division 350*4 tpd 100*2 at In charge of Operation Department of SID plant at RAIPUR Location ,
Handling mechanical activities in running maintenance, shutdown maintenance, preventive
maintenance and breakdown maintenance.
Monitoring the root cause of ...
3 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.60 LPA TO 4.20 LPA
JOB DESCRIPTION
Operate and control boiler systems, including coal-fired boilers, biomass boilers, or other types of boilers, to produce steam for electricity generation.
Monitor boiler parameters, such as water level, steam pressure, temperature, and fuel flow, using control systems and instrumentation to maintain optimal operating conditions.
Execute start-up and shutdown procedures for boilers ...