1 Opening(s)
6.0 Year(s) To 9.0 Year(s)
5.00 LPA TO 7.00 LPA
Position: Sr. Engineer/Asst. Manager - Equipment
Location: Daman
Experience: 6 - 9 Years
Industries: FMCG
Responsibilities:
Development of New equipments/SPMs for new projects (detailed spec sheet finalization with vendor, Gantt chart preparation and follow-up)
To ensure validation and qualification of new equipments as well as modifications.
Ensure relevant ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
4.20 LPA TO 4.80 LPA
Designing Of Product Drawings of Plastics & Rubber Parts In Soild Works.
Designing Of Plastics & Rubber Product , Tool , Mould In Unigraphics Nx.
Designing of SPM And Press Tool For Extrusion.
Tooling Follow up with Tool Room.
Preparing RFQ Data And Costing Data.
Handling Customer.
Quite Knowledge Of Making BOM (Bill Of Material)
APQP And PPAP ...
1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
9.00 LPA TO 10.00 LPA
Location :- Chakan
Should have sound knowledge in any one of above mentioned manufacturing processes
Good CAD Skills Conversant with PDM Hands-on with Creo
Awareness of IATF 16949:2016 specs and development of products accordingly
GD&T Knowledge Mandatory
Conceptualization to Industrialization - Complete Product Life Cycle development experience for at least two products
Tooling (Press fit, Injection ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 5.00 LPA
Job Description:
o A university degree (i.e., bachelor's degree)o Have extensively used AUTOCAD 2D & 3D, Solid Work, for designingmechanical manufacturing products.o Preparing Bill of Materialo Equipment sizing calculations.o Understand concept from customer/ make drawing concept as peruser and then detail draw it check feasibility, cost calculation.o Make drawings for production, ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
9.00 LPA TO 10.00 LPA
Establishing and implementation of Quality Management Systems (ISO 22000:2018 & FSCC 22000 Version 5.1)
Preparation and updating of HACCP, VACCP, TACCP, PRP, OPRP, CCPs.
Supplier Up-gradation (Corrugated boxes)
Machine / Product validation and improvements.
Attending customer complaints regarding quality problems and initiating preventive countermeasures and its horizontal deployment in their respective areas wherever applicable.
Trainings ...
1 Opening(s)
5.0 Year(s) To 7.0 Year(s)
5.00 LPA TO 6.00 LPA
To design and develop new product like ELMCB product mechanical and electrical point of view.
To maintain record of all developmentactivities.
Attend weekly meeting with management regarding new development.
To work on Design Software Creo-6.0 and Auto Cad 2016.
To Design &DevelopPlug Gauge, Profile Gauge, Jig & Fixture, SPM & Die for development product ...
1 Opening(s)
4.0 Year(s) To 6.0 Year(s)
3.60 LPA TO 5.50 LPA
Air Compressor, LT/HT Panel ,ACB, VCB ,Injection Molding Machine & Die Casting machine Maintenance, D.G. Set, Operation & maintenance of 33KV, T/F, Servo Stabilizer, ACs, Circuit Breakers,Chillar, A.H.U. , AC & DC Drives Motors, & pumps.
Planning Preventive maintenance of machines and equipment in the plant.
Capable to attend electrical Problems in ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 3.00 LPA
Job Location- Vrundawa Nagar Pune
JOB DESCRIPTION
Job Description :
Skills:
1. Modelling, Drafting
2. Calculation of the machine design
3. Preferably P&ID & Analysis (CFD/ Strucutural, Nonlinear, etc),
4. Component Selection based on the requirement,
5. Communication with the Suppliers, Internal customers, Production, Project team.
Knowledge:
1. Mechanical Design Basics
2. Preferably Hydraulics/ Pneumatics background.
3. Should have the New product ...
1 Opening(s)
0 To 4.0 Year(s)
1.00 LPA TO 8.00 LPA
Planning and execution of new Installations and changeover on lines
Installation of new SPM lines and equipment.
Expert in programming & troubleshooting of PLC-Beckhoff & Omron . Robots Yamaha.
CCD / Vision inspection System ( charge-coupled device , Vision system and other third
party instruments of old machines and new installations.
Good Know how of ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
Not Disclosed by Recruiter
Qualification: Diploma/BE in Mechatronics, InstrumentationExperience: 4 to 8 yrs exp in Process engineering, PLC programming, Concept design, Electrical designing/wiring for SPM Machines and Fixture design.Work location: Vasai East in Mumbai
Job description:Electrical knowledge on special machine making, Concept design capability with plc. programmingPLC Programming, Electrical designingelectrical wiringBill of material makeprocess flow ...