477 Job openings found

Designation in Organization: - PPC Engineer (Production Planning & Control)    Education: BE Electrical or Electronic / Electrical / Mechanical   Gender: Male   Responsibilities & Authority: •Capacity Planning for production of particular Shop Floor •To Monitor & do the production planning according to the customer schedule •To Monitor the Raw Material availability as per planning  •To Monitor monthly & weakly production planning •To co-ordinate with stores and purchase dept. and ensure availability of raw material required to achieve dispatch plan. •To co-ordinate with design dept. and ensure updated documents are made available for production on the shop floor •To co-ordinate with PED to ensure that all circuit testing boards and final assembly boards are timely validated and made available as per production plan. •To prepare the dispatch plan as per customer schedule. •To release the dispatch plan to production dept. •To ensure that a viable production plan has been prepared by the production team in accordance with a dispatch plan •To release a kitting plan to the store's department in accordance with the production plan. •To communicate with marketing dept. if any changes are made in the production plan that could affect the planned dispatch date. •To communicate with the design department about the output of the process feasibility analysis conducted by production dept. so that changes, if required, can be made in documents to be issued to production. •To maintain the record of the date and production order from which each change in engineering specifications is implemented in production. •To release current mod list to production and quality dept. after every MIN Meeting conducted by design dept.  •To release production orders in SAP as per plan and provide a cutting label for production. •To ensure timely confirmation of production in SAP. •To ensure that FG stocks in BSR coincide with that in SAP system. •To communicate to all concerned dept. ( Prod, Mkt and QA) regarding packed quantity on a daily basis •To ensure that packing of FG is done within shift time. •To ensure that daily production data update on display board and also update it in softcopy. •To Monitor & do measurement Of Production Objectives  •To Work in PP & MM module of SAP  •To Maintain the stock in SAP  •To Match the physical raw material stock & SAP stock  •Play an important role in WIP (STOCK) as coordinator for production & account dept. •Monitor Schedule Vs. Compliance of production •To take responsibility as an associate member in KK pillar. •Monitoring Daily Attendance & data of operator, also coordinate with HR dept. for the same.  •OEE monitoring. •Plan v/s Actual monitoring. •Scrap monitoring. •Monitoring TPM activity of production department. •Monitoring ISO & TS activity of production department. •To coordinate with purchase, Store & account dept. for new material requirement •To communicate with supervisors & line leaders of the respective section (ACC, LPC, ASSEMBLY) •To maintain KAIZEN & coordinate with QMS Dept. for the same •To prepare MRM Presentation •To make stage wise identification   Job Location: Shendra MIDC, Aurangabad   for more details call on 7249840222 / 9765567505

Designation in Organization: - PPC Engineer (Production Planning & Control)    Education: BE Electrical or Electronic   Gender: Female   Responsibilities & Authority: •Capacity Planning for production of particular Shop Floor •To Monitor & do the production planning according to the customer schedule •To Monitor the Raw Material availability as per planning  •To Monitor monthly & weakly production planning •To co-ordinate with stores and purchase dept. and ensure availability of raw material required to achieve dispatch plan. •To co-ordinate with design dept. and ensure updated documents are made available for production on the shop floor •To co-ordinate with PED to ensure that all circuit testing boards and final assembly boards are timely validated and made available as per production plan. •To prepare the dispatch plan as per customer schedule. •To release the dispatch plan to production dept. •To ensure that a viable production plan has been prepared by the production team in accordance with a dispatch plan •To release a kitting plan to the store's department in accordance with the production plan. •To communicate with marketing dept. if any changes are made in the production plan that could affect the planned dispatch date. •To communicate with the design department about the output of process feasibility analysis conducted by production dept. so that changes, if required, can be made in documents to be issued to production. •To maintain the record of the date and production order from which each change in engineering specifications is implemented in production. •To release current mod list to production and quality dept. after every MIN Meeting conducted by design dept.  •To release production orders in SAP as per plan and provide a cutting label for production. •To ensure timely confirmation of production in SAP. •To ensure that FG stocks in BSR coincide with that in SAP system. •To communicate to all concerned dept. ( Prod, Mkt and QA) regarding packed quantity on the daily basis •To ensure that packing of FG is done within shift time. •To ensure that daily production data update on display board and also update it in softcopy. •To Monitor & do measurement Of Production Objectives  •To Work in PP & MM module of SAP  •To Maintain the stock in SAP  •To Match the physical raw material stock & SAP stock  •Play an important role in WIP (STOCK) as coordinator for production & account dept. •Monitor Schedule Vs. Compliance of production •To take responsibility as associate member in KK pillar. •Monitoring Daily Attendance & data of operator, also co-ordinate with HR dept. for the same.  •OEE monitoring. •Plan v/s Actual monitoring. •Scrap monitoring. •Monitoring TPM activity of production department. •Monitoring ISO & TS activity of production department. •To coordinate with purchase , Store & account dept. for new material requirement •To communicate with supervisors & line leaders of respective section (ACC , LPC, ASSEMBLY) •To maintain KAIZEN & coordinate with QMS Dept. for the same •To prepare MRM Presentation •To make stage wise identification   Job Location: Chitegaon MIDC , Aurangabad   for more details call on 7249840222

Post: Senior Quality Engineer    Education: BE Electrical & Electronic   Experience: Min 3 Years   Responsibilities:   •Provide requisite Customer Support on Quality Issues, Visit Customers, interact and capture vital issues and collaborate with internal team for Action implementation. •Present the Action plan Implementation data to Customer through a presentation like Improvement Action Plan, Manufacturing Quality Verification etc. •Preparation of Customer as well as Internal PPM Trend & present the MIS report. •Submitting CAR in Customer required formats & online submission on Customer Portal. •To carry out the PPAP activity for newly developed products. •Review of PFMEA & Control Plan and highlight improvement points. •To make inspection standards, visual aids, SOPs, Quality Alerts. •Conduct Product Audit / Process Audit & Internal QMS Audit of various processes. •Train new and existing team members on an ongoing basis on relevant tools or topics. •Ensure adherence to targets set for all process metrics, KPI data. •Support organization in regulatory compliance and internal audits. •Support the team to maintain/control documents and procedures in the document management system. •Lead & Drive the different Kaizen projects and its sustenance  Customer  Quality •SPOC for Customer - Quality issues/complaints/queries, CAPA submission & Improvement aspects. •Setting up procedure & format for Customer Complaint Data Collection. •CRM- Automotive OEM Customers like Bajaj, Piaggio, Royal Enfield, John Deere etc.  In-process & Final Quality •Lead team of QC Engineers - Supervise the Final Testing & Inspection activities. •Well versed with a manufacturing process of Wiring Harness etc. •Setting up procedure & format for testing & Inspection activities. •Quality Audit including Product Audit, Process Audit & Monitor cost of quality & In-House Rejection. •Heading the Cost Saving /VALVE projects. Quality Management  System  •Assist to MR in an Internal Auditing program. •Qualified ISO/TS: 16949 internal auditors. •Auditing processes as per QMS requirement. A span of Management Control •Leading a diverse team of 20+ employees. •Allocation of work among the team and track for completion within an allocated time frame. •Team Building with motivational training to new Operators, Team Leaders, Supervisors, and Inspectors.   Job Location: Shendra MIDC, Aurangabad Bus canteen facility available   for more details call on 7249840222

Personnel & Administration Managing recruitment for sourcing as per manpower requirement through Job portals like Naukri, Monster india, Times job, Placement Consultant, Employee Referrals And Various Government employment and training schemes like EPP, Apprentice, etc. Conducting preliminary Interviews, tackling and co-ordinating Walk-ins. Identifying candidates as per the requirements, scheduling interviews and verifying candidate’s ...

Personnel & Administration Managing recruitment for sourcing as per manpower requirement through Job portals like Naukri, Monster india, Times job, Placement Consultant, Employee Referrals And Various Government employment and training schemes like EPP, Apprentice, etc. Conducting preliminary Interviews, tackling and co-ordinating Walk-ins. Identifying candidates as per the requirements, scheduling interviews and verifying ...

Responsibilities:   Accurate check on all received items including weight. Insert all items data in the software on daily basis. Implementing and prioritizing defined responsibilities within time limit. To look over all the received items are placed properly. Assisting in checking proper product packaging. Ensure proper vehicle unloading and cleaning premises. Strictly avoiding shortage of raw materials in ...

A process crane operator is responsible for safely and efficiently operating cranes to lift, move, and position materials and equipment within a specific process environment, such as a manufacturing plant or a construction site. This role requires a strong understanding of crane operations, safety procedures, and the ability to work collaboratively with ...

Site supervisors ensure the safe and timely completion of construction projects. They oversee everyone working on a construction site, which includes members of the construction team and any subcontractors. In this role, it's your responsibility to make sure each individual has the necessary resources to complete their tasks and to ...

Working as per sales person requirement to the site • Assigning supervisors for the site measurement , site check• Coordinating with vendors and installers for the installation• Processing installation bills of vendors • Arranging labour for the work on prior as per client requirement • Working in ERP dynamics for attaching links• Preparing ...

1) Supervises and coordinates activities of workers engaged in loading and unloading cargo from conveyances, such as railroad cars, trucks, and ships, and in moving and storing materials or products: Assigns job tasks to worker according to loading and unloading schedules, and observes loading of conveyance to determine conformance to ...