1 Opening(s)
0 To 4.0 Year(s)
1.00 LPA TO 4.00 LPA
aintain tooling consumption, Quality Checking of all tool and equipment, Issues and entries of tool life monitoring.
maintain minimum stock of tooling , highlight if tool life not complied to norms.
daily report for tool stock.
type of pumps, blowers and other equipment
used in Sewage Treatment Plants.
Inspecting equipment to ensure that it is
working ...
1 Opening(s)
0 To 2.0 Year(s)
1.00 LPA TO 3.00 LPA
Design engineer with water. Effluent & Sewage treatment plant knowledge shall be able to perform the roles and responsibilities as below for tendering as well as detail engineering stage
Design and selection of Mechanical equipment i.e. Pumps, blowers, lifting equipments, penstocks, tanks, pressure vessels etc. and Piping components Pipes, fittings, Valves, strainers, specialities etc. for ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
2.00 LPA TO 4.00 LPA
Design engineer with water. Effluent & Sewage treatment plant knowledge shall be able to perform the roles and responsibilities as below for tendering as well as detail engineering stage
Design and selection of Mechanical equipment i.e. Pumps, blowers, lifting equipments, penstocks, tanks, pressure vessels etc. and Piping components Pipes, fittings, Valves, strainers, specialities etc. for ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
0.00 LPA TO 6.00 LPA
We have an opening for the post of Co-operative Society Maintenance Manager at the Navi Mumbai(Seawoods) location.
Key Roles & Responsibilities:
Water Management In All U.G. & O.H Tanks
Maintenance Of STP Pumps And Plumbing Lines
Maintenance Of Pumps And Domestic & Flushing Lines
Maintenance Of OWC Machines
Supervision Of Plumbing Team Against Job Distribution
Supervision Of ...
4 Opening(s)
4.0 Year(s) To 8.0 Year(s)
3.00 LPA TO 5.00 LPA
CAPEX pproposal and designing of brown and green field projects.
Preparing Basic Engineering Package consisting design basis document, material balance, energy balance, Utility calculations, development of Process Flow
Development of P&IDs and layout.
Preparing process datasheet for equipment’s like batch reactors, agitators, vessel, ANF, RVD, pumps, heat exchanger, storage tanks etc.
Technical reviewing of GA drawing for fabrication.
Reviewing techno commercial ...
1 Opening(s)
12.0 Year(s) To 20.0 Year(s)
15.00 LPA TO 20.00 LPA
Manage the maintenance department that provides technical, project management, emergency response, trouble shooting and preventative maintenance support for process related equipment. Develop, maintain, and justify the departments' budgets
Coordinate and perform scheduled maintenance on facility equipment to support facility-operating requirements boilers, chillers, environmental plans, reports and permits in compliance with manufacturer’s ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.00 LPA TO 2.00 LPA
Job Location- MIDC Pimpri, Pune
JOB DESCRIPTION
Designation: - Fitter or Diploma Mechanical Engineer
Job Description:
Operation and Maintenance of all
type of pumps, blowers and other equipment
used in Sewage Treatment Plants.
Inspecting equipment to ensure that it is
working properly and efficiently.
Cleaning and repairing equipment
such as pumps, tanks, and pipes used
in wastewater treatment processes.
Maintaining records of ...
2 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 5.00 LPA
Monitoring critical spare stock, preparing material purchase orders & material requisition,Documentation of URS, Change control, DQ, IQ, PQ and execution of same.Implementation, documentation and analysis of FMEA &,breakdown
Job description
Chemical process plant maintenance of various equipment’s e.g. Pumps, Agitators, Gearboxes, Reactors, Pressure Vessel, Mixer, Columns, Chilling Plant, Boilers, Thermic Fluid Heater, ...
2 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 5.00 LPA
Job Location- warje Pune
JOB DESCRIPTION
Client of Cygnus Staffing Solutions, a leading Manufacturing Company into Dairy Engineering,
which has been taken over by a German Company, looking for
Site Engineer
Responsibilities:
Structural & sheet metal fabrication with erection- supporting structure, column-beams, conveyer, truss,
plate-rolling(ducts), chutes, cyclone, hopper, compressors etc. Machinery and equipment erection.All piping(SS, MS)fabrication and ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 4.00 LPA
Sr. No.
Details
1
To Execute and monitor brown field projects, Capex jobs, modification job, process improvement jobs by understanding process.
2
Plant Layout set up by understanding operational requirement with project manager
3
Equipment’s detailing, Erection and commissioning of GLR, SSR, Tanks, Pumps, Heat Exchangers, Vessels, Columns, Blowers ANF, Dryer, etc along with schedule bar chart
4
Reading ...