1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 4.80 LPA
Position: Executive/ Sr. Executive - Mechanical
Location: Degam near by Vapi
Experience: 2- 5 Years
Industries: Plastic
Responsibilities:
Carry out routine maintenance work
Preventive Plan Maintenance
Basic knowledge of Transformer, Air Compressor, Lift & D.G.
Troubleshooting skills & root cause analysis
Advanced knowledge of mechanical & electrical.
Responsible for installation & Maintenance of ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 8.00 LPA
1
Purpose of the job
To carry out the Maintenance and Project related activity of Utility, Plant and ETP Equipments in shift
2
Nature and scope
Electrical department ,Plant, Utility & ETP
3
Roles and Responsibilities:
He will be responsible for maintaining equipments as per Flame Proof criteria .
Ø
He will supervise the working of all Electricians working in his ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
8.00 LPA TO 10.00 LPA
Job Description:
Preparation of SLD, GA, Schematic Diagram and BOM of LV MCC Panel, VFD Panel, MLDB, APFC Panel, Junction boxes, LCS, Control Desk etc. using E-Plan / AutoCAD as applicable.
Preparation of PLC architecture and GA drawing, Schematic Diagram & BOM of PLC Panel
Calculation for sizing of Transformer, HV/LV cables, Lighting ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
3.42 LPA TO 6.00 LPA
Job Description :
27/04/24
HPS/2024/268
Design Engineer - PET
Male
1
2 to 3
DME/BE/BTECH -Mechanical
1.1 Maintaining design files and documenting is as per defined SOP.
1.2 Ensuring safety and security of design files.
1.1 Review of Quality inspection reports and suggestions for any changes to be made.
1.5 Collect trial feedback.
Qualification :DME/BE/BTECH -Mechanical
Experience : 1-2yrs in transformer industry.
Requisite : Computer ...
2 Opening(s)
5.0 Year(s) To 6.0 Year(s)
1.92 LPA TO 2.88 LPA
Job description as follows:
28.05.24
HPS/2024/326
Electrical Maintainence
Male
2
5 to 6
ITI Electrical/DEE
ELECTRICIAN:-02 PERSONIN HAND EXPERIANCE REQUIRED:-5-6 YEARSQUALIFICATION REQUIREMENT: - ITI ELECTRICIAN /DIPLOMA ELECTRICAL ENGG Salary Range: = 16000/- to 24000/- (As per Company Policy & Depend upon Interview Experience/Expertise)
Job Profile:-1) Taking daily electrical readings and maintaining power factor & log book.2) To participate in ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.40 LPA TO 2.40 LPA
JOB DESCRIPTION
Involvement in testing and commissioning of transformer
Good knowledge of electrical drawings
Knowledge of circuit breaker,PCC & MCC Panels
Worked as a site engineer for maintenance of construction power supply & erection.
Knowledge of cable schedule & cable termination.
Basic knowledge of civil drawing of Electrical Panel, Electrical Instrumentation & Electrical equipment for foundation ...
1 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Distribution Transformer 2.5 MVA & Above Operation & Maintenance
PCC & PDB O & M
Power / Control Wiring troubleshooting & Maint.
Power/ Cantrol/Instrument Cable knowledge
AC Drive /VFD Maintenance & Troubleshooting
Servo Drive Maintenance & Troubleshooting
ACB Operation & Maintenance
PLC – Allen bradly Troubleshooting Hardware
PLC & HMI basic software Knowledge & troubleshooting
Automation Basic trouble shooting ...
1 Opening(s)
1.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
JD for Accounts Assistant – Male / Female – 1 nos
Location : - Bhayli Road, Vadodara
Manage complete accounts of company.
Should have practical knowledge on Tally ERP 9.
Update accounts receivable and issue invoices
Manage statutory compliance includes GST
To facilitate proper accounting and maintenance of Books of accounts
Should maintain logistics and customer coordination ...
4 Opening(s)
4.0 Year(s) To 8.0 Year(s)
4.50 LPA TO 6.00 LPA
Qualification: Diploma or BE in Electrical, Electronic, Instrumentation, B.Sc- Electronics,Experience: 4 to 8 years of experience in selling of Electrical power equipment, Servo stabilizer, online UPS.Work location: Mumbai regionSalary is negotiable for right candidates.
Job description:Experience in sales of UPS, Servo stabilizer, Transformer, Industrial sales for electrical equipment.Experience in B2B sales, industrial sales, corporate sales, ...
1 Opening(s)
1.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 3.00 LPA
Job Description
11/01/2024
HPS/2024/27
CNC machine operator
Male
1
1 to 4
Any Graduate
The requirement of CNC machine operator for manufacturing transformer laminations
The candidate should be ITI / Diploma (Mechanical) with minimum 2 years of experience in operation / programming of CNC Machines (CNC Vertical Turning Lathe, HMC, VMC & Turning Centre) on FANUC & SINUMERIK Control.
Knowledge of operating / ...