1 Opening(s)
1.0 Year(s) To 1.5 Year(s)
1.20 LPA TO 1.80 LPA
Hiring for Production Engineer in Forging Auto component Manufacturer in Aurangabad.
Designation: Production Engineer
Education: Diploma / BE Mechanical
Must Required experience - Forging Experience, Forged automotive components,cold-forged parts, and high tensile fasteners.
Attending the Electrical breakdowns related to HVAC System, Water System, Chillers, Cooling Towers, and Boiler. (VFD settings, Panel modifications, Fault findings, etc)
Attending the Electrical breakdowns related to IBH (Induction Billet Heater) and work on energy saving on IBH.
Coordinating with the service engineer to Handling the modification activities in the plant and ensuring safety norms with timely completion of work.
Able to understand all types of Single Line Diagram as well as drawings of HT and LT.
Maintenance & operation of electrical equipment including, motors, starters,
Commissioning and maintenance of sensors - Different types of RTDs, Thermocouples, Pyrometers, Pressure switches, Level sensors, Vibration switches, proximity sensors, Limit switches, Flowmeters, Control valves.
Attending the Electrical breakdowns related to IBH (Induction Billet Heater) and work on energy saving on IBH, LT panel, HT Panel, and Diesel generator.
Daily verification of Diesel Generators, and coordinating with service engineers during schedules A, B, and C checks.
Experience: Min 10 Years
Candidate from Forging Shop.
CTC- up to 1.80 LPA (Salary will be no bar for the right candidate).
For more details call on ...
1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
2.40 LPA TO 3.00 LPA
Working as Shift Incharge and handling my team for required preventive & breakdown of mechanical and hydraulic maintenance of all machines and parts of 20 stand 2 high continuous type rolling mill.
Maintenance and troubleshooting of hydraulic.
Pneumatic system maintenance.
Integrated Maintenance system (Preventive Maintenance, Breakdown Maintenance, Maintenance Control and Spares Management) for ...
1 Opening(s)
2.0 Year(s) To 10.0 Year(s)
4.80 LPA TO 5.50 LPA
Job description
Location : SILVASSA
Experience : 2-10 years
Skills : MAINTENANCE, MECHANICAL ENGINEERING, Plant Maintenance
Role Service/Maintenance Engineer
Industry Type Recruitment, Staffing
Functional Area Production, Manufacturing, Maintenance
Employment Type Full Time, Permanent
Role Category Production/Manufacturing/Maintenance
Education
UG :B.Tech/B.E. in Electrical
PG :Post Graduation Not Required
Key Skills
maintenance electrical electrical engineering Plant maintenance
4 Opening(s)
0 To 1.0 Year(s)
1.20 LPA TO 1.40 LPA
Following is the basic details Required before joining.
1. Qualification Required :- BE Mechanical Engineering
2. Experience Required :- Fresher Or/ One Year
Salary: 12000 to 15000/- PF Deduction,and bonuses.
Documents. :-
1. Adhar Card
2. Pan Card
3. Education Certificate
4. Marks Sheet (Result)
5. School Leaving Certificate
6. Medical Fitness Certificate
7. Two Photos
1 Opening(s)
0 To 1.0 Year(s)
1.20 LPA TO 1.40 LPA
Following is the basic details Required before joining.
1. Qualification Required :- BE Mechanical Engineering
2. Experience Required :- Fresher Or/ One Year
3. State :- UP/Bihar
Recruitment: Apprentice : Stipend : 12000/- : No other facility.
Documents. :-
1. Adhar Card
2. Pan Card
3. Education Certificate
4. Marks Sheet (Result)
5. School Leaving Certificate
6. Medical Fitness Certificate
7. Seven Photos
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
2.40 LPA TO 3.60 LPA
Supervisor/ Operator for Mechanical Work Shop – 1 Post
BE (Mechanical )
Qualified in Related Field
Hand on Experience & expertise in Mechanical Work Shop, Operate & Maintenance to Sharing M/c, Press M/c, Powder Coating M/c
Shall have a min. 5-year experience
Origin Dhule Location
No Salary Bar for the right candidate
Job Location: Dhule MIDC,
if you ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
8.00 LPA TO 12.00 LPA
Preventive Maintenance Planning Spare Parts management Erection commissioning of Plant Machinery Knowledge of OHS and EMSMaintenance cost.Knowledge of Pneumatic and Hydraulic system.Working Experience with rubber industries will preferable for extrusion ProcessUtility maintenance, like Pumps, Motors, compressors, chilling plant, transformers, AFD, PLC, Power line Maintenance, HT line L.T.Panel ACB,VCB etc
Key Skills:
Electrical ...
3 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Roles and Responsibilities
HPS/2023/432/120 02 HPS/2023/641
Production Shift Engineer
Male
3
2 to 5
Cipet/Mechanical / Diploma
Industry: Injection Molding - Plastic Manufacturing
Year of Relevant Experience in Plastic Industry Quality Department: 2 to 3 Years
Educational Qualification: Diploma / BE / Mechanical
Should have experience in Quality
Should have experience in Computer
Profile Focus will be on Plant Production
COMPANY ABOUT:
Armlets Chairs , ...
2 Opening(s)
2.0 Year(s) To 7.0 Year(s)
2.40 LPA TO 4.20 LPA
1. Industrial experience of Mechanical Design and Manufacturing
2. 2 D, 3D Modeling expertise in Solidworks.
3. Content/report/description writing skill
4. Good verbal & written communication
5. Cordial relation building ability
6. Fluency in English
Perks and Benefits
Free Accommodation and Food Facility Available .
STABILIANT is a start up, progressing well, will require 6 months to 1 ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
6.50 LPA TO 7.50 LPA
Maintenance1. Ensure zero breakdowns and 100% preventive maintenance of machines.2. Zero re occurrence of failures.3. Coordination & follow up with key external vendors and maintenance consultants.4. Coordination with Process for planning of electrical & mechanical jobs.5. Execution of electrical & mechanical activities within budgeted expenses.6. To educate & implement all ...