924 Job openings found

1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
8.00 LPA TO 9.00 LPA
Tool Maintenance Head Position Summary: Responsible for proper upkeep and maintenance of Tools & Instrumentation systems to minimize production loss and production downtime and to promote efficiency Essential/Primary Responsibilities: Executive Support: Assist production head in developing the short term and long term tool maintenance strategy for the company in line with the overall production ...
1 Opening(s)
15.0 Year(s) To 18.0 Year(s)
18.00 LPA TO 20.00 LPA
manufacturer the New Development Tools of (Plastic Mold and its planning for manufacturing and assembly And Its Trail.   Daily Monitoring of the project work and updating the requirement. Daily work management. Preparation and updating work instruction to all departments. Customer interaction. Conducting daily production and rejection meeting. Improvise the customer base and new product development cycle ...
1 Opening(s)
10.0 Year(s) To 18.0 Year(s)
7.00 LPA TO 10.00 LPA
Hiring for Design Manager for Machine Shop /Tool Holders & Cutting Tool Manufacturing Industry Position:Design Manager  Design Manager Educational Qualifications: Bachelor of Engineering in the stream of Mechanical / Production. Or Diploma in Engineering in the stream of Mechanical Desired Experience: Min 10 years experience in a Manufacturing company preferably in a Machine Shop / Tool Holders or ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.50 LPA TO 3.50 LPA
Qualification: Diploma / BE in Mechanical, Production or Diploma in Tool & Die makerExperience: 2 to 5 years of experience as a Tool DesignerWork location: Shirwal location in Pune (50km from Katraj on Pune-Satara road) Job Responsibilities• Design Punching tools / Piercing die for the tool room using our current SolidWorks ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
12.00 LPA TO 14.00 LPA
Responsible for new plastics Injection mold development for Home appliances. Providing engineering support to manufacturing and R & D to improve quality & safety. Coordination with vendor, tool makers for all tooling related works. Finalize timeline for tool development with tool makers. Mold estimated cost costing and set target cost for tool makers. Moulds development ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 10.00 LPA
Job description Roles and Responsibilities   We are looking for Tool Room Engineer for our thin wall Plastic Containers Moulds Maintenance 1) Preventive Maintenance of all the Moulds. 2) Handling breakdown maintenance of moulds . 3) Coordinate with production department for Mould Issues Coordinate with mould manufacturer and tool room Manager for providing solutions to mould related issues. 4) Monitor ...
1 Opening(s)
8.0 Year(s) To 15.0 Year(s)
5.00 LPA TO 7.00 LPA
Post: Tool Room Head (Die Shop)   Education: BE / DME Mechanical Experience: 8 to 15 years in Hot Press forging (Press 1600ton, 2500ton, 1300ton) Salary Up to 6.00 LPA Job Profile : Responsible for providing finished dies to forge shop for production.  Handled development of new profile dies, round dies & tooling’s as per drawing.  Deftly followed up processes for preparing dies like die layout, VMC machining operations, and other conventional machines operation.  Actively participated in achieving forge shop production targets with appropriate problem-solving solutions to nullify it. Involved in the manufacturing & machining profile as well as round forging dies with tooling. Handled Follow up for raw material. Involved in the arrangement of schedule programmed for TPM circle meeting & give training to new joining employees on the shop floor. Supplying tooling as per drawing, records of inspection, maintain tool crib stock as per forging a plan, routing daily tool maintenance. Handled Vendor follow up, supplying materials to the vendor for machining & receiving it with finished dies within the required time, put inspection records for the same. Managed Records for die history card, scrap details, daily tool records for tool room. Issued cold & hot forging dies to production dept. Handled everyday planning of tooling for production, reduced manufacturing cost using proper tooling. Worked in the tool re-sharpening section and ordered new tools as per production requirement To plan &  utilize & control in a man with method & Machine with the material. Responsible for daily die mfg for cold forging, warm forging, and hot forging as per plan maintain back up dies for next plan.  Development of new warm & cold forging dies. Die shop vendor development. Documentation of ISO- 9001-2000. Specially working in cold forging die mfg. & Responsible for cold forging production. Maintaining TPM Related activities & document. Maintain material stock at every stage of die mfg. Controlled all ERP related activities. Plan a monthly production schedule. Plan monthly raw material. Daily & monthly plan related to PPC. Negoation with suppliers to meet quality & cost objective. Develop and improve supplier KPI Follow up with the supplier to get material in time. Maintain records of all suppliers related documents. Raise purchase requestions. Follow up with the accounting department for vendor payment Arrange transport for the collection of material Solve supplier related technical issues.  Job Location: Waluj MIDC, Aurangabad Send CV: Career@paradiseplacement.co.in for more details call on 9765567699
2 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.50 LPA
Qualification: Diploma or Degree in Indo German tool room or exp in Toolroom manufacturing unitExp: Minimum 1 yr exp Job profile:Working as member of tool room with good knowledge of tool manufacturing process.able to read design, production process and planning for tool room. Focus on new tool going into the production. ...
14 Opening(s)
Not Mentioned To 15.0 Year(s)
1.80 LPA TO 7.00 LPA
Company Profile: A company located at North Maharashtra, a 25 yrs. experienced company in Sheet metal, DBs, & Precise Press Component Manufacturing of switchgear component, progressive press tool and moulds at Jalgaon MIDC is looking for experienced Candidates for their expansion & exiting requirements as under Required Positioned as under 1) DM / AM ...
1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
2.40 LPA TO 4.80 LPA
We are hiring Diploma / ITI / Mechanical candidates for Tool room incharge positions for Coimbatore location       Job Description:  Tooling: Ensure that tools are produced efficiently, on time, and to quality standards  Safety: Implement and maintain safety rules and regulations, and run safety audits    Inventory: Maintain an accurate inventory of tools and dies.  Staff: Develop and train tool room ...

Drop Your CV

We will consider your Profile for future Jobs

Submit Profile