1 Opening(s)
10.0 Year(s) To 14.0 Year(s)
12.00 LPA TO 15.00 LPA
Position: Manager - Maintenance
Location: Hajipir - Kutch
Experience: 10 – 14 Years
Industries: Chemical
Responsibilities:
Lead and maintain mechanical maintenance, modification and capex processes, so as to support manufacturing in achieving production plan.
Identification, planning and procurement of spares, indigenous development of spares, workshop machining of plant equipments, AMC identification ...
2 Opening(s)
4.0 Year(s) To 10.0 Year(s)
40.00 LPA TO 44.00 LPA
Hi ,
We are hiring for multiple positions for Intake & Discharge Civil/Structural Engineers across different seniority levels for Gurgaon Location :
Level 2 – Responsible Engineer
Level 3 – Responsible Engineer
Level 4 – Lead Engineer
These roles are focused on large-scale Combined Cycle Power Plants, LNG Plants, Thermal Plants, Desalination Projects, and Marine ...
1 Opening(s)
6.0 Year(s) To 7.0 Year(s)
7.00 LPA TO 8.00 LPA
Objective : We are looking for guy who assist us in techno_comemrical and procurement of mechanical utility items. The mechanical system involves as follows :
HVAC systems
Comrpessed air systems
Process Chilled water network
Water supply and WTP system.
Gas lines
Boiler and thermic fluid systems.
Cooling water system.
Fire protection system.
JD
Good communication skills and dynamic personality to ...
4 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
The Turbine Operator is responsible for the safe, reliable, and efficient operation of steam turbines and their auxiliary systems (lube oil, seal oil, condensers, cooling towers). The operator monitors performance, conducts routine inspections, performs minor maintenance, and manages startup/shutdown procedures based on steel production demands and power load requirements.
Key Responsibilities
1. ...
1 Opening(s)
5.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.00 LPA
A Fitter Utility's job description involves the installation, maintenance, and repair of mechanical equipment and plant utilities like heating, cooling, and compressed air systems. Key duties include interpreting technical drawings, fabricating and assembling parts, performing routine and major maintenance, troubleshooting issues, and ensuring compliance with safety protocols.
Core responsibilities
Installation and assembly: Installing and ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.60 LPA
A TG (Turbine Generator) DCS Operator manages and monitors the steam turbine, generator, and associated auxiliary systems from a central control room using a Distributed Control System (DCS).
Key Responsibilities
DCS Monitoring & Control: Continuously track turbine parameters (speed, vibration, lube oil pressure, steam temperature, condenser vacuum, and generator voltage/frequency) via DCS ...
- Tg Dcs Operator
- Tg Dcs Engineer
- Tg Dcs Technician
- Tg Operator
- Turbine Generator Operator
- Turbine Generator Dcs Operator
- Tg Control Room Operator
- Turbine Control Room Operator
- Dcs Operator
- Dcs Control Room Operator
- Distributed Control System Operator
- Control Room Operator
- Central Control Room Operator
- Ccr Operator
- Turbine Operator
- Steam Turbine Operator
- Power Plant Operator
- Thermal Power Plant Operator
- Power Plant Dcs Operator
1 Opening(s)
10.0 Year(s) To 20.0 Year(s)
Not Disclosed by Recruiter
Minimum 10-12 years of experience out of which minimum 04-05 yrs of experience needs to be in the similar profile
FPSO experience is must.
BE in Mechanical / Electrical /Instrumentation. But Mechanical background will be given preference
If the candidate is from Marine background, he should be holding valid Indian Coc of Chief ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
20.00 LPA TO 25.00 LPA
Company: Maa Kudargarhi Group
Department: Projects – Mechanical / DRI
Location: Tilda, Raipur, Chhattisgarh (Plant/Project Site)
Employment Type: Permanent / Full-Time
Project Execution & Lifecycle Management: Drive the complete mechanical project lifecycle for expansion or greenfield/brownfield setups.
Erection & Commissioning: Supervise structural alignment, mechanical erection, installation, and cold/hot commissioning of heavy plant machinery.
Cross-Functional Coordination: Work ...
- 1. Technical & Plant Equipment Keywords Core Processes: Dri (direct Reduced Iron)
- Sponge Iron
- Rotary Kiln (350 Tpd / Large Capacity)
- Steel Melting Shop (sms)
- Induction Furnace
- Ccm
- Ferro Alloy Plant
- Whrb / Cfbc Boiler
- Power Plant Auxiliaries. Heavy Equipment & Machinery: Kiln Drives & Gearboxes
- Rotary Coolers
- Material Handling Systems
- Conveyors
- Crushers & Screens
- Fume Extraction Systems (fes)
- Cooling Water Systems
- Pumps
- Compressors
- Cold Commissioning
- Trial Runs
- Plant Stabilization
- Punch-point Closure
- Structural Alignment
- Utility Piping
- Mechanical Design Review
- Root Cause Analysis (rca)
- Resource Deployment
- Milestone Tracking
- Cost Optimization
- Budgeting
- Site Safety (hse)
- Metallurgical Plant
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 8.00 LPA
Key Responsibilities
Handle electrical maintenance of foundry production equipment including melting furnaces, induction furnaces, molding machines, core-making machines, shot blasting machines, fettling equipment and material-handling systems.
Maintain and troubleshoot HT/LT electrical systems, MCC, PCC, control panels, motors, starters, contactors, relays and transformers.
Troubleshoot PLC, HMI, VFD/AC drives, servo systems, sensors, encoders and automation-related ...
5 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.16 LPA TO 2.40 LPA
A Control Room Operator (CRO) for a Ferro Alloys unit in a steel plant is responsible for monitoring and controlling submerged arc furnaces (SAF), raw material handling, and power parameters via DCS/SCADA systems to ensure efficient production. Key roles include managing furnace temperature, electrode positioning, and tapping schedules while adhering ...