1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 5.00 LPA
Key Job Responsibilities
CAM Programming: Develop and optimize CNC/VMC programs for complex components using Mastercam software.
Tooling & Setup: Select appropriate cutting tools, holders, and fixtures based on material and part geometry to ensure optimal machining conditions.
Process Optimization: Analyze machining processes to reduce cycle times, minimize rejections, and improve overall efficiency.
Drawing Interpretation: ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
20.00 LPA TO 25.00 LPA
Company: Maa Kudargarhi Group
Department: Projects – Mechanical / DRI
Location: Tilda, Raipur, Chhattisgarh (Plant/Project Site)
Employment Type: Permanent / Full-Time
Project Execution & Lifecycle Management: Drive the complete mechanical project lifecycle for expansion or greenfield/brownfield setups.
Erection & Commissioning: Supervise structural alignment, mechanical erection, installation, and cold/hot commissioning of heavy plant machinery.
Cross-Functional Coordination: Work ...
- 1. Technical & Plant Equipment Keywords Core Processes: Dri (direct Reduced Iron)
- Sponge Iron
- Rotary Kiln (350 Tpd / Large Capacity)
- Steel Melting Shop (sms)
- Induction Furnace
- Ccm
- Ferro Alloy Plant
- Whrb / Cfbc Boiler
- Power Plant Auxiliaries. Heavy Equipment & Machinery: Kiln Drives & Gearboxes
- Rotary Coolers
- Material Handling Systems
- Conveyors
- Crushers & Screens
- Fume Extraction Systems (fes)
- Cooling Water Systems
- Pumps
- Compressors
- Cold Commissioning
- Trial Runs
- Plant Stabilization
- Punch-point Closure
- Structural Alignment
- Utility Piping
- Mechanical Design Review
- Root Cause Analysis (rca)
- Resource Deployment
- Milestone Tracking
- Cost Optimization
- Budgeting
- Site Safety (hse)
- Metallurgical Plant
1 Opening(s)
2.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
Service Executive
Reports To: Director
Job Purpose: To lead and control all service, installation, and commissioning activities for machines supplied by Plex Machines, ensuring timely execution, technical accuracy, proper documentation, and high customer satisfaction. This role will act as the single point of accountability for all service operations.
Reporting Team
Mechanical Fitters
Electrical Wiremen
Automation Engineer
Process ...
3 Opening(s)
1.0 Year(s) To 4.0 Year(s)
2.00 LPA TO 3.00 LPA
We are hiring a Assembly Executive (Injection Moulding Machines) in Ahmedabad.
Job Description – Assembly Executive (Injection Moulding Machines)
Department: Assembly / ProductionReports To: Assembly Manager / Production Head
Key Roles & Responsibilities:
Assemble injection moulding machines and sub-assembliesas per approved engineering drawings, BOMs, and assembly instructions.
Ensure accurate fitting, alignment, and installationof machine components including clamping ...
1 Opening(s)
18.0 Year(s) To 25.0 Year(s)
12.00 LPA TO 14.00 LPA
No. of Position: 1 (One)Department :- NBR ProductionJob Location: Malanpur Bhind.
Age: 40-45 years
Total Experience Required: 18-20 years
Travel Required: As required.Position would be reporting to: Unit HeadEducation Essential and Preferred: B.E. / B. Tech. from CIPET
Must have skills: Production and Rubber manufacturing.
Job Profile:
1) Knowledge in Rubber mixing, Extrusion & foaming process.2) Planning, Organizing, ...
1 Opening(s)
12.0 Year(s) To 15.0 Year(s)
12.00 LPA TO 18.00 LPA
The Deputy Manager - Production (Shift In-Charge) is responsible for leading and managing end-to-end production activities during assigned shifts across Machining and Assembly operations. The role ensures achievement of production targets, quality standards, safety compliance, manpower productivity, and continuous improvement initiatives. The incumbent will coordinate with cross-functional teams to drive ...
1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
12.00 LPA TO 18.00 LPA
Designation: Manager Production & Fabrication
Industry: Automotive Components Manufacturing (Heavy/Light Commercial Vehicle Chassis & Frames)
Location: Waluj MIDC, Chhatrapati Sambhajinagar
Salary Budget: Up to ₹30 Lakhs Per Annum (Fixed + Performance Incentives, based on experience)
Experience Required: 15 – 22 Years (with at least 5 years leading a large fabrication/chassis line)
Education: B.E. / B.Tech in ...
1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
20.00 LPA TO 30.00 LPA
Designation: Assistant General Manager (AGM) / Deputy General Manager (DGM) – Production & Fabrication
Industry: Automotive Components Manufacturing (Heavy/Light Commercial Vehicle Chassis & Frames)
Location: Waluj MIDC, Chhatrapati Sambhajinagar
Salary Budget: Up to ₹30 Lakhs Per Annum (Fixed + Performance Incentives, based on experience)
Experience Required: 15 – 22 Years (with at least 5 ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
9.00 LPA TO 14.40 LPA
Position: Project Manager
Location: Gandhinagar
Experience: 10 - 15 Years
Industries: Chemical
Responsibilities:
Project Planning & Execution
Take ownership of plant expansion, modification, debottlenecking, infrastructure, and new installation projects.
Prepare detailed project execution plans with clear timelines, responsibilities, and milestones.
Monitor project progress on a daily and weekly basis against ...
2 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.20 LPA TO 4.80 LPA
JOB DESCRIPTION – CNC PROGRAMMER
Position: CNC ProgrammerLocation: Waluj, Chhatrapati Sambhajinagar, MaharashtraExperience: 5 to 10 YearsCTC: ₹4.20 LPA to ₹4.80 LPAIndustry: Manufacturing / Engineering
Job Summary
We are looking for an experienced CNC Programmer who can independently handle CNC programming, machine setup, tooling, process development, and production support. The candidate should have strong ...