2 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.20 LPA TO 3.00 LPA
Post: Junior Quality Engineer
Educational Qualifications: Bachelor of Engineering in the stream of Mechanical / Production. Or Diploma in Engineering in the stream of Mechanical
Salary: Up to 3.00 LPA
Work Profile:
Responsible for in process quality and final outgoing quality for swing arm, wheel rim with tyre assembly, Trailing arm, Handle Bar.
Warranty sign off with analysis.
IPO preparation ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 5.00 LPA
Post: Senior Quality Engineer
Educational Qualifications: Bachelor of Engineering in the stream of Mechanical / Production. Or Diploma in Engineering in the stream of Mechanical
Salary: Up to 5.00 LPA
Work Profile:
Responsible for in process quality and final outgoing quality for swing arm, wheel rim with tyre assembly, Trailing arm, Handle Bar.
Warranty sign off with analysis.
IPO preparation ...
2 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.80 LPA
Post: Junior Quality Engineer
Educational Qualifications: Bachelor of Engineering in the stream of Mechanical / Production. Or Diploma in Engineering in the stream of Mechanical
Salary: Up to 2.60 LPA
Work Profile:
Responsible for in process quality and final outgoing quality for swing arm, wheel rim with tyre assembly, Trailing arm, Handle Bar.
Warranty sign off with analysis.
IPO ...
1 Opening(s)
4.0 Year(s) To 10.0 Year(s)
Not Disclosed by Recruiter
QUALIFICATION : BE in Mechanical, Production or Electronics or Business Proven technical skills on product and processExperience 4 to 10 years experience from Automobile industry.
Gender: MaleWork location: Vasai East in Mumbai
Keyskills: Quality, NPD, New product development, GD&T, PPAP, CFT, PFMEA, DFMEA, CAPA, "customer complaint", "supplier Quality", PDIR
Job profile:Able to handle overall Quality activities like NPD, ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.00 LPA TO 4.00 LPA
Post: Senior Quality Engineer
Education: BE Electrical & Electronic
Experience: Min 3 Years
Responsibilities:
•Provide requisite Customer Support on Quality Issues, Visit Customers, interact and capture vital issues and collaborate with internal team for Action implementation.
•Present the Action plan Implementation data to Customer through a presentation like Improvement Action Plan, Manufacturing Quality Verification etc.
•Preparation of Customer as well as Internal PPM Trend & present the MIS report.
•Submitting CAR in Customer required formats & online submission on Customer Portal.
•To carry out the PPAP activity for newly developed products.
•Review of PFMEA & Control Plan and highlight improvement points.
•To make inspection standards, visual aids, SOPs, Quality Alerts.
•Conduct Product Audit / Process Audit & Internal QMS Audit of various processes.
•Train new and existing team members on an ongoing basis on relevant tools or topics.
•Ensure adherence to targets set for all process metrics, KPI data.
•Support organization in regulatory compliance and internal audits.
•Support the team to maintain/control documents and procedures in the document management system.
•Lead & Drive the different Kaizen projects and its sustenance
Customer Quality
•SPOC for Customer - Quality issues/complaints/queries, CAPA submission & Improvement aspects.
•Setting up procedure & format for Customer Complaint Data Collection.
•CRM- Automotive OEM Customers like Bajaj, Piaggio, Royal Enfield, John Deere etc.
In-process & Final Quality
•Lead team of QC Engineers - Supervise the Final Testing & Inspection activities.
•Well versed with a manufacturing process of Wiring Harness etc.
•Setting up procedure & format for testing & Inspection activities.
•Quality Audit including Product Audit, Process Audit & Monitor cost of quality & In-House Rejection.
•Heading the Cost Saving /VALVE projects.
Quality Management System
•Assist to MR in an Internal Auditing program.
•Qualified ISO/TS: 16949 internal auditors.
•Auditing processes as per QMS requirement.
A span of Management Control
•Leading a diverse team of 20+ employees.
•Allocation of work among the team and track for completion within an allocated time frame.
•Team Building with motivational training to new Operators, Team Leaders, Supervisors, and Inspectors.
Job Location: Shendra MIDC, Aurangabad
Bus canteen facility available
for more details call on 7249840222
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.20 LPA
Job Description:
Post: Sr. Engineer - QA
Education: BE/ Dip (Mech)
Keywords: Press shop department experience candidates should be preferred
Job Profile
HAndle Customercomplaints and knowledge about IPO, PPAP, SPC, and ISO Audit.
Conducting Process Audit, Product Audit, Supplier Audit as per plan.
Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis.
Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies.
Monitoring In-Ward & Final Inspection.
1st piece in process inspection report & taking C.A. if any.
In handling customer complaints and their solutions.
To maintaining quality related document calibration report, Inspection report and etc.
To take follow up on supplier corrective action reports.
Preparing the control plan of In-Ward, Final& In-Process component.
Preparing PPAP, PFMEA for new development components
Do SPC to check process capability.
Vendor Audit & internal audit and online production inspection.
Handling Quality team for in-process inspection.
Prepare Monthly data for MRM. ï‚· ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 2.40 LPA
Post: QA Engineer In Process/ Inward
Education: BE/ Dip (Mech)
Experience: 1-4 years
Keywords: Fabrication department experience candidates should be preferred
Job Profile
Conducting Process Audit, Product Audit, Supplier Audit as per plan.
Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis.
Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies.
Monitoring In-Ward & Final Inspection.
1st piece in process inspection report & taking C.A. if any.
In handling customer complaints and their solutions.
To maintaining quality related document calibration report, Inspection report and etc.
To take follow up on supplier corrective action reports.
Preparing the control plan of In-Ward, Final& In-Process component.
Preparing PPAP, PFMEA for new development components
Do SPC to check process capability.
Vendor Audit & internal audit and online production inspection.
Handling Quality team for in-process inspection.
Prepare Monthly data for MRM. ï‚· Involvement in new machine trail & commissioning.
Making SIR ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Quality Lab Chemist
Education: Bsc / Msc Chemistry
Experience: Min 5 Years in Steel Industry / Rolling Mill
Job Assignment in Lab :
• Checking the specification percentage in the coolant, measuring the oil concentration, Checking the Cl, Fe Percentage in mill Process, Inspection the Final Rolling On Mill Process.
•Checking the CGL Line Zink Bath Testing
•Daily Reporting Process Control, Reporting The SOP Process
•Working In 5 ‘S’ Process
Job Assignment in CGL line:
•Checking the steel sheet, Checking Hardness HRB & VPN, Bend testing, LFQ (long farming testing), measuring the thickness & width, Defects on Sheet, Checking the Zinc Coating, Checking The I Value.
•Clearing the Quality CGL Line in SAP
•Reporting the SOP Process
Job Assignment In CRM Line:-
•Checking the steel sheet, Checking Defects on Sheet, Measuring the thickness & width.
•Clearing the Quality CRM Line in SAP.
•Reporting the SOP Process.
Water Test: PH, Alkalinity Hardness, Conductivity, Chloride, HCN, Total NH3, Phenol, C.O.D., B.O.D.,D.O, Oil & Grease, Mlss, Mlvss, TDS, SS, Sulphaide, Phosphate.
By Product: Tar Moisture, Tar Dust & Tar Fog, TI, and BI.
Gas Analysis orsat apparatus CO2, CmHn, O2, CO, CH4, and H2.
Estimation of NH3, H2S, Naphtha.
Coke & Coal Ash: Estimation of Coke & coal ash:
SiO2, Al2O3, CaO, MgO.
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
for more details call on 7249840333 / 9765567506
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
0.00 LPA TO 0.00 LPA
Company Profile:
The Company is India's largest, Asia's No. 1 & Among Top 5 Global Marketing & Distribution Company for Flavour and Fragrance Ingredients,It is into existence over more than 50 years.
The Company is an FSSAI Licensed & CRISIL MSE 1, Internationally BBB+ rated Company with its current business operations spread ...
7 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 3.00 LPA
Post :
QA Engineer In Process - 04
QA Engineer Inward - 03
Education: BE/ Dip (Mech)
Experience: 2-4 years
Keywords: Fabrication / Weld Shop department experience candidates should be preferred
Job Profile
QA Engineer Inward
Conducting Process Audit, Product Audit, Supplier Audit as per plan.
Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis.
Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies.
Monitoring In-Ward & Final Inspection.
1st piece in process inspection report & taking C.A. if any.
In handling customer complaints and their solutions.
To maintaining quality related document calibration report, Inspection report and etc.
To take follow up on supplier corrective action reports.
Preparing the control plan of In-Ward, Final& In-Process component.
Preparing PPAP, PFMEA for new development components
QA Engineer In Process
Monitoring of special processes (Welding).
Monitor & Handle Customer feedbacks & complaints.
Handle all type of gauges and ...