2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.50 LPA TO 2.00 LPA
Diploma, BE in Mechanical or Production with min 2 to 5 yrs exp in Quality dept. Required candidates from Glass industry or Sheet Metal/Pressparts Industry OnlyGender: Only Male candidates require.Job Profile:1. Responsible for inspection of raw material like Glass sheet/sheet metal. Should involve in in-process, inward and pre-dispatch inspection activities.2. ...
1 Opening(s)
10.0 Year(s) To 18.0 Year(s)
8.00 LPA TO 10.00 LPA
Position: Purchase Head / Manager
A dynamic professional experience with Internal Auditor for ISO/TS, TPM 5S, Six Sigma, Kaizen etc organisation in Procurement, Global and Local Sourcing, New Vendor Development, Purchase of Direct and circumlocutory material. Expertise in Material planning, Commercial Negotiation, Material Sourcing, Alternate cost effective Purchasing .Techno commercial approach towards ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
10.0 Year(s) To 18.0 Year(s)
8.00 LPA TO 10.00 LPA
Position: Purchase Head / Manager
A dynamic professional experience with Internal Auditor for ISO/TS, TPM 5S, Six Sigma, Kaizen etc organisation in Procurement, Global and Local Sourcing, New Vendor Development, Purchase of Direct and circumlocutory material. Expertise in Material planning, Commercial Negotiation, Material Sourcing, Alternate cost effective Purchasing .Techno commercial approach towards ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 7.00 LPA
Designation: Manager/Asst. manager - Maintenance
No. Of Vacancies: 02
Department: Maintenance-Machine Shop Tool Room
Description: on hand experience in Maintenance of VMC Machines, Tool Room Exposure to TPM
Key Result Areas:
•Identifying the areas of bottlenecks & breakdown; taking steps to achieve zero accident & customer complaints through the application of troubleshooting tools like Root Cause Analysis
•Conducting Daily Basis Breakdown Analysis; managing electrical, mechanical & hydraulic activates
•Preparing PM plan for Friday / Sunday (weekly off days)
•Procuring material for breakdown, preventive maintenance and critical spare
•Planning project activities such as new machine procurement, installation, layout, and so on
•Performing new modification of existing machine; creating & maintaining PM Check Sheet on micro level
•Administering utility project work such as HT Yard, LT Room, PCC & Main DB Panel
Experience: Minimum 6 Years
CTC: No bar for right candidate.
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 3.60 LPA
@ Keeping control on day to day activity. And documentation
@ Sales order creation.
@ Total Dispatch sends as per FIFO System.
@ Deliveries to Customer along with Acceptance.
@ Managing Transport vehicles for Dispatches.
@ Bin Reconciliation & Transport Bill Checking.
@ Transport Cost saving every month review.
@ Preservation and monitoring the ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.50 LPA TO 5.00 LPA
Prepare Daily production Plan and maintain all production documents while in process parts
Maintain Hourly reports and reduce the cycle time
Implement the SMED(single minutes exchange of dies) project
Monitor and editing of press shop activity towards cost cutting and cycle time improvement
Minimize the generation of scrap as possible as.
Manage various shortages problems ...
1 Opening(s)
Not Mentioned To 2.0 Year(s)
1.40 LPA TO 1.80 LPA
Job Description
Preparing RFQ, BOM & Feasibility of Trims, LMR, Plastic, FRP & Foam parts.
Design as well as Modification in parts as per manufacturing feasibility.
Making modelling, assembly & drawing of Part, Pattern, Tools, Gauges, Fixtures.
Analysis of CAD data & understand customer requirements and expectations.
Converting Non Parametric model into Parametric model & ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
1.80 LPA TO 3.00 LPA
Tally ERP-9 & Tally 7.2
Vendor accounts, generating monthly on online cheques.
Financial departments with responsibility for Payroll, Accounts Payable and Receivable.
Preparing Bank Reconciliation Statements and monthly MIS reports.
Preparation of stock statement.
Calculation of TDS, Vat , EXCISE and its reports
Preparation and filing of VAT/CST return on monthly basis & ...
5 Opening(s)
1.0 Year(s) To 5.0 Year(s)
1.20 LPA TO 3.00 LPA
977Job Description - : (SALES OFFICER )
Role & Responsibilities of Sales officer
Primary sales
Secondary sales
Primary sales:
Appoint a distributor in the given area within a 30 days (because it is a mandatory task) it is your target with an investment of Rs 5 lakh for distributorship. It is a prime task, it is ...