1 Opening(s)
2.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.20 LPA
Designation : Machine Maintenance Engineer
Experience: 2 to 3 years in Plastic injection Molding Setup.
Salary Range : 1.8-2.2 LPA
Required Qualification - BE or Equivalent.
Job Desciption:
Maintenance of injection molding machine & SPM machine
Execution of PM & PDM as per schedule, Analysis of breakdowns
Execution of TPM &PM pillar Activities
Energy saving project
Attending major breakdown maintenance
Handling documentation of executive & planned maintenance
Execution of TBM CBM as per schedule
Study of detoriotive components
Applications of kaizen
Troubleshooting and attending breakdown maintenance
Housekeeping maintenance related to department modification and spare management
Implementing ISO/TS16949, 5’s and FORMELQ
To improve machine uptime (MTBF)
To improve machine repairs time (MTTR)
Maintained machine history card
To handle electrical supply system I.e.HT &Lt side
Maintenance of hydraulic system/ pneumatic system/ to develop ladder logic of PLC, AC, DC & Servo Drive
Keeping spare in ready operational condition and maintenance of utility equipment
Capable of handling electromechanical device Is. robot, chiller, ultrasonic welding m/c
Presentation of monthly PRM
Taking outside service appointment & spare management
Recording Daily Activity Report for Meter Reading (main transformer, all panel) &Organize receivable &commercial
Documents against invoice
Working on welding machine, grinding machine, injection model and plastic mold
Job Location : Waluj MIDC, Aurangabad
For more details call on 9765567509
1 Opening(s)
8.0 Year(s) To 10.0 Year(s)
7.00 LPA TO 10.00 LPA
Post : Maitenance Head
Education : BE / Dip (Mechenical)
Experience: 7-10 Years
Keyskills: Robotic Weld Shop
Salary : up to 10 Lac(s)
Location: Aurangabad
Job Responsibilities:
Maintenance of Robotic Weld Shop.
Responsible for breakdown targets, PM planning and execution.
Spare part planning with critical spare and inventory control.
Preparation of maintenance budget with annual shutdown plan budget.
Monitor and control utility operation and its maintenance and ensure ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
1.80 LPA TO 2.60 LPA
Job Description:
Hiring for Maintenance Engineer
RESPONSIBILITY:-
Maintain TPM activity for PM pillar.
Preventive maintenance as per plan.
Attend all types breakdown in shift.
Why –why analysis on each breakdown.
Kaizen to improve MTTR, MTBF, Energy saving and Cost saving Kaizen.
PM and TBM improvement as per analysis of breakdown history.
Action taking on abnormality found during PM
Trouble shooting in all types of Gear Hobbing and Machining ...
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 4.30 LPA
KEY RESPONSIBILITY:
Maintenance activities of hydraulics/ Robotics/electric & Mechatronic
Maintenance of injection molding machine & SPM machine
Execution of PM & PDM as per schedule, Analysis of breakdowns
Execution of TPM &PM pillar Activities
Energy saving project
Attending major breakdown maintenance
Utility includes transformer, HT/LT switchgear, Air Compressor, DG set, pump house Head over crane, chiller, cooling tower, lux measurement. Firefighting system, R.o plant
Handling documentation of executive & planned maintenance
Execution of TBM CBM as per schedule
Study of detoriotive components
Applications of kaizen
Troubleshooting and attending breakdown maintenance
Housekeeping maintenance related to department modification and spare management
Implementing ISO/TS16949, 5’s and FORMELQ
To improve machine uptime (MTBF)
To improve machine repairs time (MTTR)
Maintained machine history card
To handle electrical supply system I.e.HT &Lt side
Maintenance of hydraulic system/ pneumatic system/ to develop ladder logic of PLC, AC, DC & Servo Drive
Keeping spare in ready operational condition and maintenance of utility equipment
Preparing Machine Check List: sm 450t, sm 350, Magna150t, Magna 200t, htw90, htw60 & FOR 50TH machine
Capable of handling electromechanical device Is. robot, chiller, ultrasonic welding m/c
Presentation of monthly PRM
Taking outside service appointment & spare management
Recording Daily Activity Report for Meter Reading (main transformer, all panel) &Organize receivable &commercial
Documents against invoice
Managing maintenance of machine control panel, assembly line, plant lighting, street lighting, & all electrical work in plant as well as of communication buses RS232, RS485, DH485&Modbus
Working on welding machine, grinding machine, oil filter machine water chiller, rivet gun, hydraulic pneumatic machine, DG set, exhausts fan & dehumidifier, injection model and plastic mold
Job Location : Waluj MIDC, Aurangabad
For more details call on 9765567506
1 Opening(s)
8.0 Year(s) To 14.0 Year(s)
6.00 LPA TO 7.00 LPA
Maintenance Activities
As a Maintenance Executive (HOD) representative to Plant head (GM)
Maintenance of Plastic injection molding press ,assembly machines, utility machines,tool room machines
Responsible for breakdown targets ,PM planning and execution.
Spare part planning with critical spare and inventory control .
Preparation of maintenance budget with annual shutdown plan budget.
Monitor and control utility operation and its maintenance and ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.40 LPA TO 3.60 LPA
Position - Sr. Engineer
Department - Maintenance
Experience - 3-5 yrs Experience in Maintenance
Education - BE in Electrical / Electronics
Job Location - Waluj MIDC, Aurangabad
Job Profile –
1.Ensure PM as per plan for machines & utility equipment. (Press shop, Weld Shop)
2.Responsible for complete Electrical maintenance activities(Mainly Robotics).
3.Responsible for Breakdown ...
1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.80 LPA TO 3.00 LPA
RESPONSIBILITY:-
Maintain TPM activity for PM pillar.
Preventive maintenance as per plan.
Attend all types breakdown in shift.
Why –why analysis on each breakdown.
Kaizen to improve MTTR, MTBF, Energy saving and Cost saving Kaizen.
PM and TBM improvement as per analysis of breakdown history.
Action taking on abnormality found during PM
Trouble shooting in all types of ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
7.00 LPA TO 9.00 LPA
Planning & Implementation of PM, B/D activity of plant machines (monthly, quarterly, yearly).
Preparation of TBM/CBM plans for Critical/key equipments
To solve the breakdown problem of all Co2 welding, Robots (Fanuc &Panasonic make) machines, fine boring machines, SPM, Over head conveyors, Utility and other plant equipments.
Reviewing the requirement of critical and consumable maint. spares.
Reviewing of DWM in department.
Calibration of all types of pneumatic equipments.
To keep record of test certification of material handling equipments and compressor receivers.
Implementation of 5-S & TPM activities.
Proper utilization of man resource as per skill level.
Monthly maintenance CRM reporting to management.
Design and Development of machines to increase the productivity.
To manage maintenance expense within granted budget.
Maintaining documentation work related to ISO standard.
Monitoring & controlling on repair cost, energy saving & cost saving projects.
Job Location: Waluj Aurangabad
For More details call on 9765567699
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
0.00 LPA TO 1.50 LPA
Strong Analytical and Problem Solving Skill.
Self-Motivated, Self- Confident and Quick Learner.
Ability to work with team as well as individually.
Open to learning and exploring new technology and domain
Having positive and fast learning attitude.
Recognized for persistence and a strong work ethic.
A high energy individual with an ability to work individually and as ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
800000.00 LPA TO 1200000.00 LPA
Job Profile :
Should Have Knowledge About Utility Maintenance .
Should Have Knowledge about planning & monitoring Budget & Costing .
Should have handle tracking daily .
4 Breakdown analysis-MTTR/MTBF, WHY- WHY analysis, 8 D reports. Breakdowns,
Implementing preventive maintenance programs to improve the efficiency of the system or the equipment.
Monitoring Energy consumption PNG & ...