4 Opening(s)
3.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 3.60 LPA
A Production Engineer – Rolling Mill is responsible for overseeing and optimizing rolling mill operations to ensure efficient production of steel products (TMT bars, rods, sections, coils, etc.) while maintaining quality, safety, and productivity targets.
Key Responsibilities
Production Operations
Supervise daily operations of hot rolling/cold rolling mill.
Ensure smooth rolling of billets/slabs into finished ...
1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
15.00 LPA TO 25.00 LPA
Location: Raipur, Chhattisgarh
Experience: 15 to 20+ Years
Qualification: B.E. / B.Tech in Mechanical or Metallurgical Engineering
Industry: Steel Manufacturing / Heavy Rolled Products / Structural Steel
Operations Leadership: Direct end-to-end hot rolling mill and structural finishing operations, ensuring optimal daily output, high capacity utilization, and adherence to production schedules.
Yield & Cost Optimization: Monitor ...
- ⚙️ Core Technical & Mill Operations Keywords Hot Rolling Mill (hrm) & Rolling Operations Structural Steel Manufacturing (tmt Bars
- Angles
- Channels
- Beams
- H-beams) Reheating Furnace & Furnace Efficiency (fuel-to-steel Ratio) Mill Stand Configuration (roughing
- Intermediate
- Finishing Stands) Roll Shop Management & Roll Pass Design Cooling Bed & Shear Line Operations Capacity Utilization & Tonnage Per Hour (tph) 📈 Yield
- Quality & Maintenance Keywords Rolling Yield Optimization & Scale Loss Reduction Scrap Minimization & Process Efficiency Bis / Astm / International Quality Standards Total Productive Maintenance (tpm) & Preventive/predictive Maintenance Heavy Hydraulics & Centralized Lubrication Systems Mechanical Testing (tensile
- Bend
- Rebend) 👥 Leadership
- Business & Financial Keywords Plant Head / Mill Head / General Manager - Operations P&l Management & Cost Control Production Planning & Control (ppc) Manpower Handling & Union/labor Relations Erp Systems (sap Pp
- Mm
- And Pm Modules) 🛡️ Safety & Compliance Keywords Ehs (environment
- Health
- And Safety) Hot Metal Safety Protocols Factory Act Compliance & Statutory Norms State Pollution Control Board (cecb / Pcb) Norms
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
15.00 LPA TO 25.00 LPA
Position Title: Manager - Quality Control (QC) / Head - QA/QC
Department: Quality Assurance & Quality Control (QA/QC)
Location: Raipur, Chhattisgarh (or plant site)
Reporting To: Head of Operations / Plant Head / Corporate Quality Head
Mill-Floor Quality & Process Inspection:
Monitor hot rolling processes, dimensional accuracy, and surface finish of rolled structural profiles (angles, ...
- 🔬 Core Quality & Testing Keywords Qa/qc Management & Quality Assurance / Quality Control Metallurgical Testing & Chemical Composition Analysis (spectrometer) Mechanical Testing (tensile Strength
- Yield Strength
- Elongation
- Bend/rebend Tests) Universal Testing Machine (utm) & Metrology Dimensional Accuracy & Tolerance Inspection (angles
- Channels
- Beams
- Tmt Bars) Rolling Defect Analysis & Root Cause Analysis (rca) 📜 Standards
- Compliance & Certifications Keywords Bis Standards (bureau Of Indian Standards) & Astm / Iso / Is Codes Iso 9001 Quality Management System (qms) Third-party Inspection (tpi) Coordination (sgs
- Bureau Veritas
- Rites) Non-destructive Testing (ndt) (ultrasonic Testing
- Magnetic Particle Inspection) Capa (corrective And Preventive Action) & Non-conformance Reports (ncr) ⚙️ Plant & Mill Process Keywords Hot Rolling Mill Quality Control Billet & Raw Material Inspection Laboratory Management & Equipment Calibration Erp Systems (sap Qm Module - Quality Management) Six Sigma / Lean Quality Tools 👥 Leadership & Management Keywords Quality Manager / Head - Qa/qc / Qc In-charge Team Leadership & Shift Qc Management Customer Audits & Vendor Quality Assessment
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 6.00 LPA
Post: Maintenance Shift In charge
Education: DEE / BE Electrical
Experience: Min 6 Years in Rolling Mill / Steel Industry
Job Profile: Working in a general shift, make daily job planning, manpower planning as per rolling section.
Responsible for doing pm-1(preventive maintenance) jobs .shift schedule and daily checklist follow-up,
Responsible for Electrical & Automation Maintenance of 600-meter long HAPL Line consist of Entry section, RCM Welder,6-HI Cold / Hot Rolling Mill, Furnace, Scale Breaker, Shot- Blaster, Pickling, Entry-Mill & Exit Loppers & exit Section.
Responsible for handling all maintenance related activities of ABB PLC's,AC Drives,AC Motors and DCS 800xA System and LT and HT switch Gears used in the plant
Knowledge in logic solving in control panels & various interlocking schemes required for automation and analyzing all drawings related to automation & control systems.
Instrumental in coordinating with various internal departments and contractor personnel for safe execution of shutdowns and ensuring implementation of routine/preventive/breakdown maintenance schedules of the system to increase machine uptime, equipment reliability thereby.
Responsible for maintaining 5S activity & safety measures regularly
To co-ordinate with the Electrical contractor for Execution, Erection, and Commissioning
Basic Knowledge of Sheet CENTER GUIDE and STEERING UNIT, EDGE System provided by EMG.
Knowledge of hardware Communication between Drives, PLC and HMI’s through Fiber Optic and Profibus.
Knowledge of Gauge Measurement system provided by IMS used at 6 HI in Line Mill.
Responsible for keeping a record of the daily power consumption, daily delay report, spare parts list of the plant.
Basic Knowledge about Control-Logix / Compact-Logix systems of Allen-Bradley PLC (Rockwell Automation).
Identifying NetLinx networks for use in a Logix5000 System used for in-line Welder.
Successfully accomplished Erection, testing, Commissioning of ARP System(Acid Recovery Process
To maintain records, logbook for the job carried out.
Organize safety meetings & give on the Job training to my subordinates
To ensure good housekeeping in the area and the shop floor.
Take participate in IMS internal audit and prepare all supporting document
To maintain a record of bypass of trip & interlock as per the procedures.
Working on SAP (Plant Maintenance Module).
Job Location: Chitegaon MIDC, Aurangabad Maharashtra
For more details call on 7249840333 / 9765567506
Send CV on career@paradiseplacement.co.in
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
8.00 LPA TO 15.00 LPA
Strong knowledge of the hydraulic system, valve, pump, Seals etc.
• Handled complete mechanical maintenance of Hot Strip Mill equipment, including Steckel Mill, Strip Mill, work roll, backup roll,Pinch Roll, Deflector Roll, Run Out Table, Laminar Cooling, and Up-Coiler mandrel to be repair.
• Managed daily operations and maintenance activities of the ...
1 Opening(s)
12.0 Year(s) To 15.0 Year(s)
6.00 LPA TO 7.20 LPA
Key Responsibilities:Daily, weekly, and monthly scheduling of rolling programs and pass changes to meet marketing demand.Monitoring the Induction Furnace, CCM (Continuous Casting Machine), and Hot Rolling Mill processes to maintain optimal temperature and rolling speed for TMT properties.Ensuring TMT bars meet standards for tensile strength and ductility through proper quenching ...
2 Opening(s)
9.0 Year(s) To 10.0 Year(s)
3.60 LPA TO 4.80 LPA
Job description / Role
Employment: Full Time
Main Accountabilities:Performance.•Following HSE standards•100% compliance of preventive and predictive maintenance ensuring zero break down.•100% support to emergency services.Responsibilities•Responsible for maintenance of hot rolling mill area.•Day to day activity planning, manpower planning, materials planning and implementation of central maintenance plan. Execution of preventive, scheduled, shutdown maintenance activities ...