1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
1.20 LPA TO 1.44 LPA
|| Responsibilities || - Deliver various items to different addresses as assigned. - Stick to a schedule and be time-bound on the job. - Follow the prescribed routes most convenient for delivery. - Load and unload the vehicle as needed. - Inspect, operate and maintain the vehicle and its cleanliness. -
|| ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.60 LPA TO 4.50 LPA
Hiring for Structural / Project in charge
Structural Engineer Responsibilities:
Prepare reports, designs, and drawings.
Make calculations about pressures, loads, and stresses.
Consider the strength of construction materials and select appropriately.
Provide technical advice on safe designs and construction.
Obtain planning and/or building regulations approval.
Analyze configurations of the basic components of a structure.
Liaise with professional staff such ...
1 Opening(s)
3.0 Year(s) To 7.0 Year(s)
Not Disclosed by Recruiter
Develop and implement QC procedures and processes for fabrication activities.
Ensure compliance with industry standards, project specifications and company policies.
Conduct inspections and tests on raw materials, in-process products and finished goods to ensure they meets quality standards.
NDT Level – II Certificate (VT & DPT)
Knowledge of reading fabrication Drawing.
Relevant Knowledge of ...
3 Opening(s)
0 To 3.0 Year(s)
1.92 LPA TO 3.00 LPA
Perform chemical analysis and physical property testing of materials and products.
Research, design, and develop new production processes.
Coordinate and perform tests.
Analyze data to develop conclusions.
Communicate results of analysis and research.
Evaluate current processes and develop improvements to safety, quality, and efficiency.
Create standards and specifications for processes, facilities, products and tests.
Assist in the ...
2 Opening(s)
3.0 Year(s) To 7.0 Year(s)
3.60 LPA TO 4.80 LPA
Routine Maintenance and Servicing:• Perform scheduled preventive maintenance on diesel generators (engine oil changes, filter replacements, coolant checks, etc.).• Inspect and clean fuel, air, and oil systems.2. Troubleshooting and Repairs:• Diagnose mechanical, electrical, and fuel system problems.• Repair or replace faulty parts such as starters, alternators, injectors, fuel pumps, and ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
Not Disclosed by Recruiter
The Quality Controller ensures that all products meet established quality standards by monitoring production processes, inspecting raw materials, and conducting final product checks. This role plays a key part in maintaining product safety, consistency, and compliance with regulatory requirements.
Inspect raw materials and packaging for quality compliance.
Monitor production stages ...
5 Opening(s)
5.0 Year(s) To 10.0 Year(s)
10.00 LPA TO 16.00 LPA
We are looking for an experienced and detail-oriented Buyer to manage the procurement of piping materials and equipment. The ideal candidate will be responsible for sourcing, negotiating, and purchasing piping products in accordance with company policies, project specifications, and industry standards to ensure quality, cost-effectiveness, and timely delivery.
Key Responsibilities
Procurement & Sourcing
Source and purchase piping materials ...
150 Opening(s)
2.0 Year(s) To 25.0 Year(s)
2.00 LPA TO 20.00 LPA
1. Experience required 1 to 9 years. Education, BSC Chemistry, MSC Chemistry, Diploma Chemical, B.E. Chemical or M. E. Chemical
2. Experience required from continuous chemical/petrochemical/Refinery in Production/Process Department
3. Experience of DCS required.
4. Preference for candidates having PA experience.
5. Deep Knowledge of various unit operations and process.
6. Heat balance, Material balance, Problem solving technique.
7. Responsible for normal operation ...
2 Opening(s)
1.5 Year(s) To 2.0 Year(s)
Not Disclosed by Recruiter
JD :
Install, maintain, and repair elevators and lift systems.
Perform regular cleaning, greasing, and safety checks.
Inspect and align safety parts, guide rails, and doors.
Respond quickly to breakdowns and mechanical issues.
Install and test electrical components.
Replace or repair worn-out parts and lubricate moving components.
Prevent breakdowns by identifying parts needing replacement.
Ensure timely and reliable ...
1 Opening(s)
2.0 Year(s) To 8.0 Year(s)
Not Disclosed by Recruiter
Description:
Develop project plans, including timelines, resources, and budget requirements
Coordinate with internal teams, contractors, and vendors to ensure smooth execution of HVAC projects
Oversee installation and commissioning of HVAC systems, ensuring compliance with quality standards
Monitor project progress and make adjustments as needed to ensure timely completion
Conduct regular site visits to inspect workmanship ...